Abstract
Gypsiferous soils are considered as problematic soils that cause damage to engineering infrastructures, particularly hydraulic structures. The exposition of gypsiferous soils to the steady flow leads to the dissolution of gypsum particles, significantly changing the soil engineering characteristics. In this paper, by employing physical, chemical, and mechanical experiments, the effect of raw gypsum with various percentages (0%, 3%, 6%, 9%, 12% and 15%) on the geotechnical parameters of a low plasticiy clay was investigated through leaching. Electrical conductivity test and ionic concentration analysis were used to assess the trend of gypsum dissolution. The results showed that leaching and increased gypsum content significantly degraded soil engineering characteristics, such as strength and compressibility. Acidic accelerator (diluted acetic acid) speeded up the chemical reaction rate and, at the same time, affected the geotechnical properties of the soil more than water. Mineralogical and microstructural studies (x-ray diffraction, scanning electron microscopy and energy-dispersive x-ray spectroscopy) were carried out to evaluate the interaction between gypsum and soil particles and verify laboratory test results. The x-ray diffraction patterns indicated the formation of new peaks such as calcium aluminate hydrated (CAH) and calcium silicate hydrated (CSH) and the altered structure of pure soil following the addition of raw gypsum. Scanning electron microscope images confirmed the presence of cementitious compounds and changes in the texture of gypsiferous soil in comparison with pure soil. Energy dispersive x-ray interpretation revealed changes in the chemical composition of soil blended with gypsum. The laboratory test results were corroborated by microstructural analyses.
Similar content being viewed by others
References
Abdal Husain MM, Akhtarpour A, Mahmood M (2018) Wetting challenges on the gypsiferous soils. 4th international conference on civil engineering, architecture & urban planning with sustainable development approach, March 22, Shiraz, Ira
Abu Zeid MM, Abd El-Aal A (2017) Effect of salinity of groundwater on the geotechnical properties of some Egyptian clay. Egyptian Journal of Petroleum 26:643–648, DOI: https://doi.org/10.1016/j.ejpe.2016.09.003
Afsharian A, Abbasi N, Khoserowjerdi A, Sedghi H (2016) Analytical and laboratory evaluation of the solubility of gypsiferous soils. Civil Engineering Journal 2:590–599, DOI: https://doi.org/10.28991/cej-2016-00000061
Al-Busoda BS (1999) Studies on the behavior of gypseous soil and its treatment during loading. PhD Thesis, University of Baghdad, Baghdad, Iraq
Al-Dabbagh T, Al-Diwaji H, Saed S, Hammo N (1990) Effect of increasing gypsum on the engineering properties of surface soils. Al-Muhandis Journal 104:21–25 (in Arabic)
Al-Ezzi SK, Zakaria WA (2020) Dynamic response of a footing adjacent to dynamically loaded footing on gypseous soil. SN Applied Sciences 2(4):585, DOI: https://doi.org/10.1007/s42452-020-2367-2
Al-Obaidi A, Al-Mafragei I (2016) Settlement and collapse of gypseous soils. Tikrit Journal of Engineering Sciences 23(1):20–31
Al-Sanad H, Al-Bader B (1990) Laboratory study on leaching of calcareous soil from Kuwait. Journal of Geotechnical Engineering 116(12):1797–1809, DOI: https://doi.org/10.1061/(ASCE)0733-9410(1990)116:12(1797)
Al-Sharrad MAA (2007) Leaching effects on some properties of sandy gypseous soils. Iraqi Journal of Civil Engineering 8:79–89
Al-Taie AJ, Albusoda BS, Alabdullah SFI, Dabdab AJ (2019) An experimental study on leaching in gypseous soil subjected to triaxial loading. Geotechnical and Geological Engineering 37(6):5199–5210, DOI: https://doi.org/10.1007/s10706-019-00974-2
Aldaood A, Bouasker M, Al-Mukhtar M (2014a) Effect of long-term soaking and leaching on the behaviour of lime-stabilised gypseous soil. International Journal of Pavement Engineering 16(1):11–26, DOI: https://doi.org/10.1080/10298436.2014.893329
Aldaood A, Bouasker M, Al-Mukhtar M (2014b) Free swell potential of lime-treated gypseous soil. Applied Clay Science 102:93–103, DOI: https://doi.org/10.1016/j.clay.2014.10.015
Aldaood A, Bouasker M, Al-Mukhtar M (2014c) Impact of wetting-drying cycles on the microstructure and mechanical properties of lime-stabilized gypseous soils. Engineering Geology 174:11–21, DOI: https://doi.org/10.1016/j.enggeo.2014.03.002
AlNouri I, Saleam S (1994) Compressibility characteristics of gypseous sandy soils. Geotechnical Testing Journal 17(4):465–474, DOI: https://doi.org/10.1520/GTJ10307J
Alsafi S, Farzadnia N, Asadi A, Huat B (2017) Collapsibility potential of gypseous soil stabilized with fly ash geopolymer; characterization and assessment. Construction and Building Materials 137:390–409, DOI: https://doi.org/10.1016/j.conbuildmat.2017.01.079
Arakelyan EA (1986) Characteristics of the determination of the physical properties of gypsum soils. Soil Mechanics and Foundation Engineering 23(1):27–29, DOI: https://doi.org/10.1007/BF01743393
Asghari S, Ghafoori M, Tabatabai SS (2018) Changes in chemical composition and engineering properties of gypseous soils through leaching: An example from Mashhad, Iran. Bulletin of Engineering Geology and the Environment 77(1):165–175, DOI: https://doi.org/10.1007/s10064-017-1076-6
ASTM D698-12 (2012) Standard test methods for laboratory compaction characteristics of soil using standard effort (12 400 ft-lbf/ft3 (600 kN-m/m3)). ASTM D698-12, ASTM International, West Conshohocken, PA, USA
ASTM D854-14 (2014) Standard test methods for specific gravity of soil solids by water pyrometer. ASTM D854-14, ASTM International, West Conshohocken, PA, USA
ASTM D2487-17 (2017) Standard practice for classification of soils for engineering purposes (unified soil classification system). ASTM D2487-17, ASTM International, West Conshohocken, PA, USA
ASTM D3080/D3080M-11 (2011) Standard test method for direct shear test of soils under consolidated drained conditions. ASTM D3080/D3080M-11, ASTM International, West Conshohocken, PA, USA
ASTM D4318-87 (2005) Standard test methods for liquid limit, plastic limit, and plasticity index of soils. ASTM D4318-87, ASTM International, West Conshohocken, PA, USA
ASTM D6913/D6913M-17 (2017) Standard test methods for particle-size distribution (gradation) of soils using sieve analysis. ASTM D6913/D6913M-17, ASTM International, West Conshohocken, PA, USA
ASTM D7928-21 (2021) Standard test method for particle-size distribution (gradation) of fine-grained soils using the sedimentation (hydrometer) analysis. ASTM D7928-21, ASTM International, West Conshohocken, PA, USA
Awn SHA, Husain WA (2010) Effect of acetic acid on the compressibility of gypsiferous soil. Diyala Journal of Engineering Sciences 3:286–298
Ayeldeen M, Negm A, El-Sawwaf M, Kitazume M (2017) Enhancing mechanical behaviors of collapsible soil using two biopolymers. Journal of Rock Mechanics and Geotechnical Engineering 9(2): 329–339, DOI: https://doi.org/10.1016/j.jrmge.2016.11.007
Azam S (2000) Collapse and compressibility behaviour of arid calcareous soil formations. Bulletin of Engineering Geology and the Environment 59(3):211–217, DOI: https://doi.org/10.1007/s100640000060
Bahrami R, Khayat N, Nazarpour A (2020) Effect of nano-stabilizer on geotechnical properties of leached gypsiferous soil. Geomechanics and Engineering 23(2):103–113, DOI: https://doi.org/10.12989/gae.2020.23.2.103%20
BS 1377-2 (1990) Method of test for soils for civil engineering purposes. British Standard Institution, BS 1377-2, London, UK
Chikhaoui M, Belayachi N, Ammar N, Hoxha D (2017) Experimental characterization of the hydromechanical properties of the gypsum soil of Sebkha of Oran. Periodica Polytechnica Civil Engineering 61(4), DOI: https://doi.org/10.3311/PPci.10468
Di Matteo L, Ricco R Filippini L, Vinti G (2016) Permeability of remoulded low-plasticity clay contaminated by bioethanol-based fluids. Bulletin of Engineering Geology and the Environment 75(1):293–300, DOI: https://doi.org/10.1007/s10064-015-0739-4
Edwards RMW (1942) Earthwork in embankments. Road engineering section. The Institution of Civil Engineers Engineering Division Papers 1(2):1–12, DOI: https://doi.org/10.1680/idivp.1942.13343
El-Refahi N (1976) Problems of the irrigation networks in gypsum lands. Report No.16, Iranian Committee on Irrigation and Drainage
Fattah MY, al-Musawi HHM, Salman FA (2012) Treatment of collapsibility of gypseous soils by dynamic compaction. Geotechnical and Geological Engineering 30(6):1369–1387, DOI: https://doi.org/10.1007/s10706-012-9552-z
Fattah M, Aswad M, Majeed Q (2011) Hydroccompression settlement and collapse of gypseous soils. 4th International Scientific Conference, Salahaddin University, Erbil, Iraq
Fattah MY, Obead IH, Omran HA (2019) A study on leaching of collapsible gypseous soils. International Journal of Geotechnical Engineering 1–11, DOI: https://doi.org/10.1080/19386362.2019.1647664
Freyer D, Voigt W (2003) Crystallization and phase stability of CaSO4 and CaSO4 — Based salts. Monatshefte für Chemie / Chemical Monthly 134(5):693–719, DOI: https://doi.org/10.1007/s00706-003-0590-3
Ghadiri H (2004) Salinization of Karun River in Iran by shallow groundwater and seawater encroachment. International Conference on Hydro-Science and Engineering, Brisbane, Australia
Golabi M, Hasili MA, Boroomand Nasab S (2020) Study and evaluation of irrigation and drainage networks using analytic hierarchy process in Khuzestan province: A virtual water approach. Agricultural Water Management 241:106305, DOI: https://doi.org/10.1016/j.agwat.2020.106305
Greyling M, Van Rooy JL (2019) Hydrogeological properties of gypseous soils in South Africa. South African Journal of Geology 122(3):389–396, DOI: https://doi.org/10.25131/sajg.122.0029
Harris MA (2016) Dust Reduction in bauxite red mud waste using carbonation, gypsum & flocculation. In: Harris MA (ed) Geobiotechnological solutions to anthropogenic disturbances: A caribbean perspective. Springer International Publishing, New York, NY, USA, 21–48
He C, Makovicky E, Øsbæck B (1995) Thermal stability and pozzolanic activity of calcined illite. Applied Clay Science 9(5):337–354, DOI: https://doi.org/10.1016/0169-1317(94)00033-M
Horpibulsuk S, Yangsukkaseam N, Chinkulkijniwat A, Du YJ (2011) Compressibility and permeability of Bangkok clay compared with kaolinite and bentonite. Applied Clay Science 52(1):150–159, DOI: https://doi.org/10.1016/j.clay.2011.02.014
Islam S, Haque A, Wilson SA, Ranjith PG (2016) Time-dependent strength and mineralogy of lime-GGBS treated naturally occurring acid sulfate soils. Journal of Materials in Civil Engineering 28(1), DOI: https://doi.org/10.1061/(ASCE)MT.1943-5533.0001333
James AN, Lupton ARR (1978) Gypsum and anhydrite in foundations of hydraulic structures. Géotechnique 28(3):249–272, DOI: https://doi.org/10.1680/geot.1978.28.3.249
Jha AK, Sivapullaiah PV (2016a) Role of gypsum on microstructure and strength of soil. Environmental Geotechnics 3(2):78–89, DOI: https://doi.org/10.1680/envgeo.13.00084
Jha AK, Sivapullaiah PV (2016b) Volume change behavior of lime treated gypseous soil — Influence of mineralogy and microstructure. Applied Clay Science 119:202–212, DOI: https://doi.org/10.1016/j.clay.2015.09.017
Jha AK, Sivapullaiah PV (2017a) Unpredictable behaviour of gypseous/gypsiferous soil: An overview. Indian Geotechnical Journal 47:503–520, DOI: https://doi.org/10.1007/s40098-017-0239-5
Jha AK, Sivapullaiah PV (2017b) Volume change behavior of gypseous soil. Journal of Materials in Civil Engineering 29(10):06017010, DOI: https://doi.org/10.1061/(ASCE)MT.1943-5533.0002015
Jha AK, Sivapullaiah PV (2018) Potential of fly ash to suppress the susceptible behavior of lime-treated gypseous soil. Soils and Foundations 58(3):654–665, DOI: https://doi.org/10.1016/j.sandf.2018.02.024
Kargar S, Javadi A, Estabragh AR (2014) Investigation on the mechanical properties of gypsum soil. Construction Materials 167(5):251–257, DOI: https://doi.org/10.1680/coma.12.00045
Kaufhold S, Dohrmann R, Klinkenberg M, Noell U (2015) Electrical conductivity of bentonites. Applied Clay Science 114:375–385, DOI: https://doi.org/10.1016/j.clay.2015.05.032
Klein C, Dutrow B (2008) Manual of mineral science, 23rd edition. John Wiley and Sons, Inc., Hoboken, NJ, USA
Klein C, Hurlbut CS (1985) Manual of mineralogy, after J.D. Dana, 20th edition. John Wiley and Sons, Inc., Hoboken, NJ, USA
Knappett JA, Craig RF (2012) Craig’s soil mechanics, 8th edition. CRC Press, Boca Raton, FL, USA
Köhler SJ, Dufaud F, Oelkers EH (2003) An experimental study of illite dissolution kinetics as a function of ph from 1.4 to 12.4 and temperature from 5 to 50°C. Geochimica et Cosmochimica Acta 67(19):3583–3594, DOI: https://doi.org/10.1016/S0016-7037(03)00163-7
Kuttah D, Sato K (2015) Review on the effect of gypsum content on soil behavior. Transportation Geotechnics 4:28–37, DOI: https://doi.org/10.1016/j.trgeo.2015.06.003
Lingwall BN, Anderson S (2013) Settlement of large embankment construction adjacent to a buried gas pipeline — A case history in settlement mitigation using lightweight fill. 7th conference of the international conference on case histories in engineering, April 29, Chicago, IL, USA
Luong P (1984) Damaging settlements of a building due to gypsum dissolution. In: Case histories in geotechnical engineering. Missouri University of Science and Technology, Saint Louis, MO, USA
Ma KL, Long GC, Xie YJ (2012) Railway tunnel concrete lining damaged by formation of gypsum, thaumasite and sulfate crystallization products in southwest of China. Journal of Central South University 19(8):2340–2347, DOI: https://doi.org/10.1007/s11771-012-1280-2
Mahmood MR, Fattah M, Khalaf A (2019) Experimental investigation on the bearing capacity of skirted foundations on submerged gypseous soil. Marine Georesources & Geotechnology 1–12, DOI: https://doi.org/10.1080/1064119X.2019.1656311
Moula BH, Al-Saoudi NK (2010) Predication collapse of gypseous soils due to wetting. Al-Taqani Journal 23(4):157–164
Muhauwiss FM (2018) Physical properties of gypseous soil after gypsum removal using EDTA solution. Tikrit Journal of Engineering Sciences 25(2):68–73, DOI: https://doi.org/10.25130/tjes.25.2.09
Nasiri H, Khayat N, Mirzababaei M (2021) Simple yet quick stabilization of clay using a waste by-product. Transportation Geotechnics 28: 100531, DOI: https://doi.org/10.1016/j.trgeo.2021.100531
Noman BJ, Abd-Awn SH, Abbas HO (2019) Effect of pile spacing on group efficiency in gypseous soil. Civil Engineering Journal 5(2):373–389, DOI: https://doi.org/10.28991/cej-2019-03091252
Nusier O, Al-Mufty A, Jaradat R (2008) Determination of saline soils specific gravity. Jordan Journal of Civil Engineering 2(1):1–19
Pashaei L, Manafi S (2017) Study of physico-chemical and mineralogical properties of gypsiferous soils in the north of Urmia. Applied Soil Reseach 4(2):72–90 (in Persian)
Petrukhin VP, Arakelyan ÉA (1984) Strength of gypsum-clay soils and its variation during the leaching of salts. Soil Mechanics and Foundation Engineering 21(6):264–268, DOI: https://doi.org/10.1007/bf01711765
Plusquellec H (2019) Overestimation of benefits of canal irrigation projects: Decline of performance over time caused by deterioration of concrete canal lining. Irrigation and Drainage 68, DOI: https://doi.org/10.1002/ird.2341
Rahimi H, Abbasi N (2008) Failure of concrete canal lining on fine sandy soils: A case study for the Saveh Project. Irrigation and Drainage 57:83–92, DOI: https://doi.org/10.1002/ird.350
Razouki SS, Kuttah DK (2006) Predicting long-term soaked CBR of gypsiferous subgrade soils. Proceedings of The Institution of Civil Engineers-Transport 159(3):135–140, DOI: https://doi.org/10.1680/tran.2006.159.3.135
Razouki SS, Kuttah DK, Al-Damluji OA, Nashat IH (2008) Using gypsiferous soil for embankments in hot desert areas. Proceedings of the Institution of Civil Engineers — Construction Materials 161(2):63–71, DOI: https://doi.org/10.1680/coma.2008.161.2.63
Sadeghiamirshahidi M, Vitton SJ (2019) Analysis of drying and saturating natural gypsum samples for mechanical testing. Journal of Rock Mechanics and Geotechnical Engineering 11(2):219–227, DOI: https://doi.org/10.1016/j.jrmge.2018.08.007
Salih N, Mohammed A (2017) Characterization and modeling of long-term stress-strain behavior of water confined pre-saturated gypsum rock in Kurdistan Region, Iraq. Journal of Rock Mechanics and Geotechnical Engineering 9(4):741–748, DOI: https://doi.org/10.1016/j.jrmge.2017.03.009
Schanz T, Karim HH (2018) Geotechnical characteristics of some Iraqi gypseous soils. The 3rd international conference on buildings, construction and environmental engineering, October 23–25, Egypt, DOI: https://doi.org/10.1051/matecconf/201816201005
Sedmale G, Randers M, Rundans M, Seglins V (2017) Application of differently treated illite and illite clay samples for the development of ceramics. Applied Clay Science 146:397–403, DOI: https://doi.org/10.1016/j.clay.2017.06.016
Sharma AK, Sivapullaiah PV (2016) Ground granulated blast furnace slag amended fly ash as an expansive soil stabilizer. Soils and Foundations 56(2):205–212, DOI: https://doi.org/10.1016/j.sandf.2016.02.004%20
Shlash K, Al-Rawi K (1994) Effect of acids on the physical and engineering properties of gypsiferous soil. Engineering Technology Journal 13(17):7–13
Sissakian VK, Adamo N, Al-Ansari N (2020) The role of geological investigations for dam siting: Mosul dam a case study. Geotechnical and Geological Engineering 38(2):2085–2096, DOI: https://doi.org/10.1007/s10706-019-01150-2
Sivapullaiah PV, Jha AK (2014) Gypsum induced strength behaviour of fly ash-lime stabilized expansive soil. Geotechnical and Geological Engineering 32(5):1261–1273, DOI: https://doi.org/10.1007/s10706-014-9799-7
Subhi HM (1987) The properties of salt contaminated soils and their influence on the performance of roads in Iraq. PhD Thesis, University of London, London, UK
Tilak BV, Rakesh Kumar D, Mohanty B (2015) Strength characteristics of bentonite-lime-gypsum mix reinforced with coir fibres. European Journal of Environmental and Civil Engineering 19(9):1108–1135, DOI: https://doi.org/10.1080/19648189.2015.1005159
Torabi-Kaveh M, Heidari MM, Behzad H, Miri M (2011) Effect of dissolved sodium chloride content in water on the dissolution of gypseous rock (case study; Chamshir dam reservoir, SW Iran). Australian Journal of Basic and Applied Sciences 5:1418–1424
Yilmaz I (2001) Gypsum/anhydrite: Some engineering problems. Bulletin of Engineering Geology and the Environment 60(3):227–230, DOI: https://doi.org/10.1007/s100640000071
Yilmaz I, Civelekoglu B (2009) Gypsum: An additive for stabilization of swelling clay soils. Applied Clay Science 44(1):166–172, DOI: https://doi.org/10.1016/j.clay.2009.01.020
Yu J, Chen X, Cai Y-Y, Li H (2016) Triaxial test research on mechanical properties and permeability of sandstone with a single joint filled with gypsum. KSCE Journal of Civil Engineering 20(9):2243–2252, DOI: https://doi.org/10.1007/s12205-015-1663-7
Zheng J, Li J, Ling L, Liu X, Kong S, Liao H, Lin Z (2020) Crystal regulation of gypsum via hydrothermal treatment with hydrogen ion for Cr(VI) extraction. Journal of Hazardous Materials 390:120614
Acknowledgments
The authors are grateful to Advanced Soil Mechanics Laboratory of Azad University of Ahvaz for providing laboratory space and facilities.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Bahrami, R., Khayat, N. & Nazarpour, A. Laboratory Investigation on Physical-Mechanical Characteristics and Microstructure of a Clayey Gypsiferous Soil in the Presence of Chemical Accelerator. KSCE J Civ Eng 25, 3273–3288 (2021). https://doi.org/10.1007/s12205-021-1622-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-021-1622-4