Abstract
The emergence of additive manufacturing (AM) has enabled the design of complex structures with high performance, such as functionally graded cellular structures (FGCSs). Concurrent topology optimization is commonly utilized for designing FGCSs; however, this approach suffers from an extremely high computational cost due to the complexity of the design problem. Recently, level-set-based methods, which rely on the implicit-based modeling technique, have gained increased attention and been considered as an efficient design tool for structures fabricated with AM. In this work, a multiscale structural optimization method for FGCS design utilizing level-set descriptions is proposed. Contrary to the well-known level-set topology optimization, in this approach, the shape is represented and parameterized with implicit functions, and the optimization process is performed to find the optimal parameters. The proposed method can replace topology optimization for microscale structural optimization within the multiscale structural design with reduced computation cost and comparable optimally designed results. Moreover, the unique behaviors of pre-selected cellular structures could be maintained during the optimization process by proper parametric constraints. The proposed design approach was validated through two design examples, both of which demonstrate remarkable structural performance enhancements in comparison with the single-scale design approach. Furthermore, two three-dimensional design examples, commonly found in automotive and aerospace industries, further prove the applicability of the proposed method in practice.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Allaire G, Jouve F, Toader AM (2004) Structural optimization using sensitivity analysis and a level-set method. J Comput Phys 194(1):363–393. https://doi.org/10.1016/j.jcp.2003.09.032
Alzahrani M, Choi SK, Rosen DW (2015) Design of truss-like cellular structures using relative density mapping method. Mater Des 85:349–360. https://doi.org/10.1016/j.matdes.2015.06.180
Cheng L, Zhang P, Biyikli E, Bai JX, Robbins J, To A (2017) Efficient design optimization of variable-density cellular structures for additive manufacturing: theory and experimental validation. Rapid Prototyp J 23(4):660–677. https://doi.org/10.1108/Rpj-04-2016-0069
Fryazinov O, Vilbrandt T, Pasko A (2013) Multi-scale space-variant FRep cellular structures. Comput Aided Des 45(1):26–34. https://doi.org/10.1016/j.cad.2011.09.007
Fu JJ, Li H, Gao L, Xiao M (2019) Design of shell-infill structures by a multiscale level set topology optimization method. Comput Struct 212:162–172. https://doi.org/10.1016/j.compstruc.2018.10.006
Geoffroy-Donders P, Allaire G, Michailidis G, Pantz O (2020) Coupled optimization of macroscopic structures and lattice infill. Int J Numer Methods Eng. https://doi.org/10.1002/nme.6392
Guo X, Zhang WS, Zhong WL (2014) Doing topology optimization explicitly and geometrically-a new moving morphable components based framework. Journal of Applied Mechanics-Transactions of the Asme 81(8):081009. https://doi.org/10.1115/1.4027609
Jiang L, Gu XD, Chen SK (2021) Generative design of bionic structures via concurrent multiscale topology optimization and conformal geometry method. J Mech Des 143(1):1–29. https://doi.org/10.1115/1.4047345
Li DW, Liao WH, Dai N, Dong GY, Tang YL, Xie YM (2018) Optimal design and modeling of gyroid-based functionally graded cellular structures for additive manufacturing. Comput Aided Des 104:87–99. https://doi.org/10.1016/j.cad.2018.06.003
Li DW, Liao WH, Dai N, Xie YM (2020) Anisotropic design and optimization of conformal gradient lattice structures Computer-Aided Design:119. https://doi.org/10.1016/j.cad.2019.102787
Liu C, Zhu YC, Sun Z, Li DD, Du ZL, Zhang WS et al (2018a) An efficient moving morphable component (MMC)-based approach for multi-resolution topology optimization. Struct Multidiscip Optim 58(6):2455–2479. https://doi.org/10.1007/s00158-018-2114-0
Liu JK, Gaynor AT, Chen SK, Kang Z, Suresh K, Takezawa A et al (2018b) Current and future trends in topology optimization for additive manufacturing. Struct Multidiscip Optim 57(6):2457–2483. https://doi.org/10.1007/s00158-018-1994-3
Nguyen CHP, Kim Y, Choi Y (2019) Design for additive manufacturing of functionally graded lattice structures: a design method with process induced anisotropy consideration. International Journal of Precision Engineering and Manufacturing-Green Technology 8(1):29–45. https://doi.org/10.1007/s40684-019-00173-7
Noël L, Duysinx P (2016) Shape optimization of microstructural designs subject to local stress constraints within an XFEM-level set framework. Struct Multidiscip Optim 55(6):2323–2338. https://doi.org/10.1007/s00158-016-1642-8
Panetta J, Rahimian A, Zorin D (2017) Worst-case stress relief for microstructures. ACM Trans Graph 36(4):1–16. https://doi.org/10.1145/3072959.3073649
Sivapuram R, Dunning PD, Kim HA (2016) Simultaneous material and structural optimization by multiscale topology optimization. Struct Multidiscip Optim 54(5):1267–1281. https://doi.org/10.1007/s00158-016-1519-x
Song YZ, Yang ZW, Liu Y, Deng JS (2018) Function representation based slicer for 3D printing. Computer Aided Geometric Design 62:276–293. https://doi.org/10.1016/j.cagd.2018.03.012
Steuben JC, Iliopoulos AP, Michopoulos JG (2016) Implicit slicing for functionally tailored additive manufacturing. Comput Aided Des 77:107–119. https://doi.org/10.1016/j.cad.2016.04.003
Svanberg K (1987) The method of moving asymptotes - a new method for structural optimization. Int J Numer Methods Eng 24(2):359–373. https://doi.org/10.1002/nme.1620240207
Tang YL, Zhao YF (2018) Multifunctional design of heterogeneous cellular structures. Struct Multidiscip Optim 58(3):1121–1138. https://doi.org/10.1007/s00158-018-1956-9
Tang YL, Kurtz A, Zhao YF (2015) Bidirectional evolutionary structural optimization (BESO) based design method for lattice structure to be fabricated by additive manufacturing. Comput Aided Des 69:91–101. https://doi.org/10.1016/j.cad.2015.06.001
Van Miegroet L, Duysinx P (2007) Stress concentration minimization of 2D filets using X-FEM and level set description. Struct Multidiscip Optim 33(4-5):425–438. https://doi.org/10.1007/s00158-006-0091-1
Velho, L., Gomes, J., & Figueiredo, L. H. d. (2002). Implicit objects in computer graphics. Springer Verlag New York.
Wang MY, Wang XM, Guo DM (2003) A level set method for structural topology optimization. Comput Methods Appl Mech Eng 192(1-2):227–246. https://doi.org/10.1016/S0045-7825(02)00559-5
Wang YQ, Chen FF, Wang MY (2017) Concurrent design with connectable graded microstructures. Comput Methods Appl Mech Eng 317:84–101. https://doi.org/10.1016/j.cma.2016.12.007
Wang YQ, Zhang L, Daynes S, Zhang HY, Feih S, Wang MY (2018) Design of graded lattice structure with optimized mesostructures for additive manufacturing. Mater Des 142:114–123. https://doi.org/10.1016/j.matdes.2018.01.011
Wu J, Aage N, Westermann R, Sigmund O (2018) Infill optimization for additive manufacturing-approaching bone-like porous structures. IEEE Trans Vis Comput Graph 24(2):1127–1140. https://doi.org/10.1109/TVCG.2017.2655523
Wu ZJ, Xia L, Wang ST, Shi TL (2019) Topology optimization of hierarchical lattice structures with substructuring. Comput Methods Appl Mech Eng 345:602–617. https://doi.org/10.1016/j.cma.2018.11.003
Xia L (2016a) Appendix - Design of extreme materials in Matlab. In: Multiscale Structural Topology Optimization. Elsevier, pp 119–143. https://doi.org/10.1016/B978-1-78548-100-0.50010-0
Xia L (2016b) Simultaneous topology optimization of structure and materials. In: Xia L (ed) Multiscale Structural Topology Optimization (pp. 67-88). Elsevier. https://doi.org/10.1016/b978-1-78548-100-0.50004-5
Xia L (2016c) Topology optimization framework for multiscale nonlinear structures. In: Xia L (ed) Multiscale Structural Topology Optimization (pp. 1-19). Elsevier. https://doi.org/10.1016/b978-1-78548-100-0.50001-x
Zhang P, Toman J, Yu Y, Biyikli E, Kirca M, Chmielus M et al (2015) Efficient design-optimization of variable-density hexagonal cellular structure by additive manufacturing: theory and validation. Journal of Manufacturing Science and Engineering-Transactions of the Asme 137(2):021004–021004-8. https://doi.org/10.1115/1.4028724
Zhang WS, Yuan J, Zhang J, Guo X (2016) A new topology optimization approach based on moving morphable components (MMC) and the ersatz material model. Struct Multidiscip Optim 53(6):1243–1260. https://doi.org/10.1007/s00158-015-1372-3
Funding
This research was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. 2019R1A2C1002010).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Replication of results
Sufficient information is presented within the manuscript equipping readers with the tools to replicate the results. Furthermore, computer codes and numerical data needed to reproduce design results and figures in the paper can be accessed by contacting the corresponding author.
Additional information
Responsible Editor: Xu Guo
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Nguyen, C.H.P., Choi, Y. Multiscale design of functionally graded cellular structures for additive manufacturing using level-set descriptions. Struct Multidisc Optim 64, 1983–1995 (2021). https://doi.org/10.1007/s00158-021-02959-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-021-02959-3