Abstract
Nitrogen oxide (NO) gas is one of the major environmental pollutants being generated from the steel industry. Since there are no techniques that can predict how much of NO will be formed from coal, it is extremely required to derive some indices based on the understanding of how coal properties are related with the formation of NO. The current research investigated how coal properties such as nitrogen content, fixed carbon (FC), volatile matter (VM) and functional forms of nitrogen could affect the conversion of nitrogen to NO (XNO) for anthracite, semi-anthracite and bituminous coals. It was expected that coals containing high nitrogen would provide the highest values of XNO. However, there was no correlation between nitrogen content and XNO. A variable that related coal properties and defined the quality of coal was proposed by Cr (FC/VM). For all grades of coals, XNO tended to decrease as Cr increased. The relationship between nitrogen functional forms and XNO was highly dependent on coal grade. XNO value increased when pyridinic-N increased and pyrrolic-N decreased in anthracite and bituminous coals before combustion, and pyrrolic-N increased and pyridinic-N decreased in semi-anthracite coals before combustion. This suggests that pyridinic-N might be considered to be the major functional form that affects the conversion of nitrogen to NO for all the coals measured. NO index for each coal grade was derived by using the previously-mentioned variables affecting XNO. The linear coefficients of the relations between NO index and XNO was found to be 0.98, 0.62 and 0.64 for anthracite, semi-anthracite and bituminous coals, respectively. More coals should be measured to validate the proposed NO indices with increased accuracy.
Similar content being viewed by others
References
M. D. Kelly, A. N. Buckley and P. F. Nelson: Proceedings of the international conference on coal science, 1991, pp. 356–60.
J. R. Pels, M. A. Wojtowicz and J. A. Moulijin: Fuel, 1993, vol. 72, pp. 373-379.
W. Wang, S. D. Brown, C. J. Hindmarsh and K. M. Thomas: Fuel, 1994, vol. 73, pp. 1381-1388.
S. Kambara, T. Takarada, M. Toyoshima and K. Kato: Fuel, 1995, vol. 74, 1247-1253.
L. L. Baxter, R. E. Mitchell, T. H. Fletcher and R. H. Hurt: Energy & Fuels, 1996, vol. 10, pp. 188-196.
K. M. Thomas: Fuel, 1997, vol. 76 (6), pp. 457-473.
Y. Ohtsuka, T. Watanabe, K. Asami and H. Mori: Energy & Fuels, 1998, vol. 12, pp. 1356-1362.
Y. Chen, Z. Guo and Z. Wang: Fuel Processing Technology, 2009, vol. 90, pp. 933-938.
Q. Zhao, X. Wang, H. Tan, J. Si, Y. Niu and T. Xu: Asian Journal of Chemistry, 2010, vol. 22 (9), pp. 6998-7004.
W. Chen, H. Yang, Y. Chen, M. Xia, X. Chen, and H. Chen: Environ. Sci. Technol., 2017, vol. 51, pp. 6570-6579.
X. Li, R. Zhu, X. Mao, D. Liu and L. Shi: The 9th Korea-China Joint Symposium on Advanced Steel Technology, Jeju, South Korea, 2017.
C. Wang, P. Wang, L. Zhao, Y. Du and D. Che: Appl. Sci., 2018, vol. 8, pp. 2499-2510.
K. Zhang, J. Shangguan, S. Yang, S. Guo, W. Du, S. Liu, L. Chen and P. Shi: IOP Conference Series: Materials Science and Engineering, 2019, vol. 592, pp. 1-6.
Y. Chen, Z. Guo, Z. Wang and G. Feng: International Journal of Minerals, Metallurgy and Materials, 2009, vol. 16 (2), pp. 143-148.
H. Han, Y. Chen, C. Xie, D. Yuan, Y. Chen and B. Wang: Advanced Materials Research, 2013, vols. 781-784, pp. 2594-2597.
H. Zhou, P. Ma, M. Zhou, Z. Lai and M. Cheng: J. Energy Inst., 2018, pp. 1–11.
Z. Y. Yu, X. H. Fan, M. Gan and X. L. Chen: Journal of Iron and Steel Research, International, 2017, vol. 24, pp. 1184-1189.
Y. Chen, Z. Guo and G. Feng: International Journal of Minerals, Metallurgy and Materials, 2011, vol. 18 (4), pp. 390-397.
M. A. Wojtowicz, J. R. Pels and J. A. Moulijn: Fuel, 1995, vol. 74 (4), pp. 507-516.
J. E. Johnsson: Fuel, 1994, vol. 73 (9), pp. 1398-1415.
P. Burchill and L. S. Welch: Fuel, 1989, vol. 68, pp. 100-104.
S. Kambara, T. Takarada, Y. Yamamoto and K. Kato: Energy & Fuels, 1993, vol. 7, pp. 1013-1020.
S. R. Kelemen, M. L. Gorbaty and P. J. Kwiatek: Energy & Fuels, 1994, vol. 8, pp. 896-906.
J. R. Pels, F. Kapteijn, J. A. Moulijn, Q. Zhu and K. M. Thomas: Carbon, 1995, vol. 33 (11), pp. 1641-1653.
K. Stanczyk, R. Dziembaj, Z. Piwowarska and S. Witkowski: Carbon, 1995, vol. 33 (10), pp. 1383-1392.
Z. Wu, Y. Sugimoto and H. Kawashima: Energy & Fuels, 2003, vol. 17, pp. 694-698.
Y. Zhang, J. Zhang, C. Sheng, J. Chen, Y. Liu, L. Zhao and F. Xie: Energy & Fuels, 2011, vol. 25, pp. 240-245.
E. Ikeda, P. Nicholls and J. C. Mackie: Proceedings of the Combustion Institute, 2000, vol. 28, pp. 1709-1716.
N. Tsubouch and Y. Ohtsuka: Fuel, 2002, vol. 81, pp. 2335-2342.
K. Andersson, F. Normann, F. Johnsson and B. Leckner: Ind. Eng. Chem. Res., 2008, vol. 47, pp. 1835-1845.
J.M. Jones, P.M. Patterson, M. Pourkashanian, A. Arenillas, F. Rubiera and J.J. Pis: Fuel, 1999, vol. 78, pp. 1171-1179.
A. Arenillas, R.I. Backreedy, J.M. Jones, J.J. Pis, M. Pourkashanian, F. Rubiera and A. Williams: Fuel, 2002, vol. 81, pp. 627-636.
Z.Q. Li, F. Wei and Y. Jin: Chemical Engineering Science, 2003, vol. 58, pp. 5161-5171.
N. Hashimoto, H. Watanabe, R. Kurose and H. Shirai: Energy, 2017, vol. 118, pp. 47-59.
K. Sugawara, T. Takusari, T. Sugawara, M. Shirai and Y. Nishiyama: Int. J. Soc. Mater. Eng. Resources, 1992, vol. 7 (2), pp. 312–19.
H. Knicker, P. G. Hatcher and A. W. Scaroni: Energy & Fuels, 1995, vol. 9, pp. 999-1002.
B. Tian, Y. Qiao, X. Lin, Y. Jiang, L. Xu, X. Ma and Y. Tian: Fuel processing technology, 2018, vol. 179, pp. 99-107.
A. Iwamoto, S. Matsuo, Y. Miyamoto, Y. Saito, Y. Matsushita, H. Aoki, Y. Kubota and H. Hayashizaki: Journal of the Japan Institute of Energy, 2018, vol. 97, pp. 40-44.
D. Ding, G. Liu and B. Fu: Fuel, 2019, vol. 245, pp. 174-180.
L. Tomas da Rocha, H. Kim, C. Lee and S. M. Jung: Metall. Mater. Trans. B, 2020, vol. 51, pp. 2068-2078.
D. W. Pershing and J. O. L Wendt: Ind. Eng. Chem. Process Des, Dev., 1979, vol. 18 (1), pp. 60–67.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Manuscript submitted January 14, 2021; accepted May 14, 2021.
Rights and permissions
About this article
Cite this article
Cho, S., Tomas da Rocha, L., Chung, BJ. et al. Evaluation of NO Index for Predicting the Formation of NO in the Combustion of Coals Used in the Steel Works. Metall Mater Trans B 52, 2676–2686 (2021). https://doi.org/10.1007/s11663-021-02228-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11663-021-02228-0