Abstract
In this paper, a high-performance geopolymer grouting material based on slag and fly ash was developed and the properties were investigated. The fluidity, setting time, compressive strength, water resistance and drying shrinkage were studied to evaluate the workability and mechanical properties of geopolymer grouting material (GGM). X-ray diffraction (XRD) and scanning electron microscope (SEM) were used to analyze the microstructural performance of GGM. The results show that the concentration of alkaline activator and slag content plays a significant role in properties of GGM and the optimum formula has been obtained. In the course of the study, the effect of concentration of alkaline activator and the content of slag on the workability and mechanical performance of GGM is different. All properties of geopolymer were considered comprehensively, the slag content and concentration of alkaline activator were 70% and 37%, which indicated that the geopolymer grouting material made from slag and fly ash could meet the requirements of concrete reinforcement well and was friendly to the environment.
Similar content being viewed by others
Abbreviations
- FA:
-
Fly ash
- GGM:
-
Geopolymer grouting material
- L :
-
Coefficient of Water Resistance
- S :
-
Coefficient of Drying Shrinkage
- SL:
-
Slag
References
Aboulayt A, Reda J, Hamza S (2018) Stability of a new geopolymer grout: Rheological and mechanical performances of metakaolin-fly ash binary mixtures. Construction and Building Material 181:420–436, DOI: https://doi.org/10.1016/j.conbuildmat.2018.06.025
Arnoult M, Perronnet M, Autef A (2018) How to control the geopolymer setting time with the alkaline silicate solution. Journal of Non-Crystalline Solids 495:59–66, DOI: https://doi.org/10.1016/j.jnoncrysol.2018.02.036
Boonserm K, Sata V, Pimraksa K (2012) Improved geopolymerization of bottom ash by incorporating fly ash and using waste gypsum as additive. Cement and Concrete Composites 34(7), DOI: https://doi.org/10.1016/j.cemconcomp.2012.04.001
Cai J, Pei JZ, Luo QH (2017) Comprehensive service properties evaluation of composite grouting materials with high-performance cement paste for semi-flexible pavement. Construction and Building Material 153:544–556, DOI: https://doi.org/10.1016/j.conbuildmat.2017.07.122
Cristelo N, Soares E, Rosa I, Miranda T, Oliveira DV, Silva RA, Chaves A (2013) Rheological properties of alkaline activated fly ash used in jet grouting applications. Construction and Building Material 48:925–933, DOI: https://doi.org/10.1016/j.conbuildmat.2013.07.063
DGJ/32 TJ 225-2017 (2017) Technical specification for modified geopolymer grouting reinforcement of urban road. Housing and Urban-Rural Development Department of Jiangsu Province, Nanjing, China
Duxson P, Provis JL, Lukey GC (2007) The role of inorganic polymer technology in the development of ‘green concrete’. Cement and Concrete Research 37(12):1590–1597, DOI: https://doi.org/10.1016/j.cemconres.2007.08.018
Fernández-Jiménez A, Palomo A (2005) Composition and microstructure of alkali activated fly ash binder: Effect of the activator. Cement and Concrete Research 35(10):1984–1992, DOI: https://doi.org/10.1016/j.cemconres.2005.03.003
GB/T 1346-2011 (2011) Test methods for water requirement of normal consistency, setting time and soundness of the Portland cement. General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, Beijing, China
GB/T 8077-2012 (2012) Methods for testing uniformity of concrete admixture. GB/T 8077-2012, General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, Beijing, China
GB/T 17671-1999 (1999) Method of testing cements-Determination of strength. The State Bureau of Quality and Technical Supervision, Beijing, China
Hamza G, Cevik A, Kifayah MA, Gülsan ME (2019) On the rheology of using geopolymer for grouting: A comparative study with cement-based grout included fly ash and cold bonded fly ash. Construction and Building Material 196:594–610, DOI: https://doi.org/10.1016/j.conbuildmat.2018.11.140
Hilal EH, Najif I (2018) Effect of process parameters on the performance of fly ash/GGBS blended geopolymer composites. Journal of Sustainable Cement-Based Materials 7(2):1–19, DOI: https://doi.org/10.1080/21650373.2017.1411296
Ishwarya GA, Singh BB, Deshwal SB (2019) Effect of sodium carbonate/sodium silicate activator on the rheology, geopolymerization and strength of fly ash/slag geopolymer pastes. Cement and Concrete Composites 97:226–238, DOI: https://doi.org/10.1016/j.cemconcomp.2018.12.007
JC/T 603-2004 (2004) Technical Standard test method for drying shrinkage of mortar. National Development and Reform Commission, Beijing, China
Kasper T, Meschke G (2006) A numerical study of the effect of soil and grout material properties and cover depth in shield tunnelling. Computers & Geotechnics 33(4/5):234–247, DOI: https://doi.org/10.1016/j.compgeo.2006.04.004
Kornnika W, Sakprayut S, Manow P (2017) Effect of alkali-activated metakaolin cement on compressive strength of mortars. Applied Clay Science 141:272–279, DOI: https://doi.org/10.1016/j.clay.2017.01.025
Lee HK, Jang JG (2016) Effect of fly ash characteristics on delayed high-strength development of geopolymers. Construction and Building Material 102:260–269, DOI: https://doi.org/10.1016/j.conbuildmat.2015.10.172
Lemougna PN, Nzeukou A, Aziwo B (2019) Effect of slag on the improvement of setting time and compressive strength of low reactive volcanic ash geopolymers synthetized at room temperature. Materials Chemistry and Physics 239:122077, DOI: https://doi.org/10.1016/j.matchemphys.2019.122077
Lemougna PN, Wang KT, Tang Q (2017) Study on the development of inorganic polymers from red mud and slag system: Application in mortar and lightweight materials. Construction and Building Material 156:486–495, DOI: https://doi.org/10.1016/j.conbuildmat.2017.09.015
Li ZF, Zhang J, Li SC (2020) Effect of different gypsums on the workability and mechanical properties of red mud-slag based grouting materials. Journal of Cleaner Production 245:118759, DOI: https://doi.org/10.1016/j.jclepro.2019.118759
Liu JQ, Chen WZ, Yuan JQ, Li C, Zhang Q, Li X (2017) Groundwater control and curtain grouting for tunnel construction in completely weathered granite. Bulletin of Engineering Geology & the Environment 77:515–531, DOI: https://doi.org/10.1007/s10064-017-1003-x
Lu GR, Zhang LW, Wang HB (2014) Practical and experimental study of grouting anchor in slope reinforcement engineering. Applied Mechanics and Materials 580:129–134, DOI: https://doi.org/10.4028/www.scientific.net/AMM.580-583.129url
Lv J, Zhou TH, Du Q (2017) Experimental investigation on properties of gypsum-quicklime-soil grout material in the reparation of earthen site cracks. Construction And Building Material 157:253–262, DOI: https://doi.org/10.1016/j.conbuildmat.2017.08.180
Marjanovic N, Komljenovic M, Bascarevic Z, Nikolic V, Petrovic R (2015) Physical-mechanical and microstructural properties of alkali-activated fly ash-blast furnace slag blends. Ceramics International 41(1):1421–1435, DOI: https://doi.org/10.1016/j.ceramint.2014.09.075
Mehta A, Siddique R (2017) Sulfuric acid resistance of fly ash based geopolymer concrete. Construction And Building Material 146:136–143, DOI: https://doi.org/10.1016/j.conbuildmat.2017.04.077
Najif I, Hilal EH (2018) Development and characterization of fly ash-slag blended geopolymer mortar and lightweight concrete. Journal of Materials in Civil Engineering 30(4):04018029.1–04018029.14, DOI: https://doi.org/10.1061/(ASCE)MT.1943-5533.0002209
Palomo A, Blanco-Varela MT, Granizo ML, Pueratas F (1999) Chemical stability of cementitious materials based on metakaolin. Cement and Concrete Research 29(7):997–1004, DOI: https://doi.org/10.1016/S0008-8846(99)00074-5
Riessen AV, Jamieson E, Kealley CS (2013) Bayer-geopolymers: An exploration of synergy between the alumina and geopolymer industries. Cement and Concrete Composites 41(4):29–33, DOI: https://doi.org/10.1016/j.cemconcomp.2013.04.010
Songpiriyakij S, Kubprasit T, Jaturapitakkul C, Chindaprasirt P (2010) Compressive strength and degree of reaction of biomass-and fly ash-based geopolymer. Construction and Building Material 24(3):236–240, DOI: https://doi.org/10.1016/j.conbuildmat.2009.09.002
Sun XW, Wu TJ (2014) Experimental research of alkali-activated slag cementitious material. Bulletin of the Chinese Ceramic Society 33:3036–3040, DOI: https://doi.org/10.16552/j.cnki.issn1001-1625.2014.11.031
Tang Q, Wang KT, Muhammad Y (2018) Synthesis of highly efficient porous inorganic polymer microspheres for the adsorptive removal of Pb∼(2+) from wastewater. Journal of Cleaner Production 193:351–362, DOI: https://doi.org/10.1016/j.jclepro.2018.05.094
Tang Q, Xue GH, Yang SJ (2017) Study on the preparation of a free-sintered inorganic polymer-based proppant using the suspensions solidification method. Journal of Cleaner Production 148:276–282, DOI: https://doi.org/10.1016/j.jclepro.2017.02.001
Wang J, Zhang LW, Feng X, Zhao SL, Wang HB (2015) Experiment and application research on alkali-activated geopolymer two-component grouting material. Chinese Journal of Rock Mechanics and Engineering 34:4418–4425
Xiang JC, Liu LP, Cui XM (2019) Effect of Fuller-fine sand on rheological, drying shrinkage, and microstructural properties of metakaolin-based geopolymer grouting materials. Cement and Concrete Composites 104:103381, DOI: https://doi.org/10.1016/j.cemconcomp.2019.103381
Yang T, Zhu HJ, Zhang ZH (2018) Effect of fly ash microsphere on the rheology and microstructure of alkali-activated fly ash/slag pastes. Cement and Concrete Research 109:198–207, DOI: https://doi.org/10.1016/j.cemconres.2018.04.008
Yazdi MA, Liebscher M, Hempel S (2018) Correlation of microstructural and mechanical properties of geopolymers produced from fly ash and slag at room temperature. Construction and Building Material 191(10):330–341, DOI: https://doi.org/10.1016/j.conbuildmat.2018.10.037
Zhang C, Fu JY, Yang JS (2018) Formulation and performance of grouting materials for underwater shield tunnel construction in karst ground. Construction and Building Material 187:327–338, DOI: https://doi.org/10.1016/j.conbuildmat.2018.07.054
Zhang ZH, Wang H, Zhu YC (2014) Using fly ash to partially substitute metakaolin in geopolymer synthesis. Applied Clay Science 88:194–201, DOI: https://doi.org/10.1016/j.clay.2013.12.025
Zhang DW, Zhao KF, Xie FZ (2020) Effect of water-binding ability of amorphous gel on the rheology of geopolymer fresh pastes with the different NaOH content at the early age. Construction and Building Materials 261:120529, DOI: https://doi.org/10.1016/j.conbuildmat.2020.120529
Zhao Y, Li PF, Tian SM (2013) Prevention and treatment technologies of railway tunnel water inrush and mud gushing in China. Journal of Rock Mechanics & Geotechnical Engineering 5(6):468–477, DOI: https://doi.org/10.1016/j.jrmge.2013.07.009
Acknowledgments
The authors gratefully acknowledge financial supports from the National Natural Science Foundation of China (51578481) and the National Natural Science Foundation of China (51578480).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Xu, J., Kang, A.H., Wu, Z.G. et al. Research on the Formulation and Properties of a High-Performance Geopolymer Grouting Material Based on Slag and Fly Ash. KSCE J Civ Eng 25, 3437–3447 (2021). https://doi.org/10.1007/s12205-021-1699-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-021-1699-9