Abstract
By means of the low cycle loading tests on six recycled aggregate concrete (RAC) columns with different proportions, in combination with the Park-Ang two-parameter damage model suitable for ordinary concrete columns and the damage degree Dc of actual structures, the calculated value of cyclic loading coefficient β of recycled aggregate concrete columns was determined. It would be achieved by analyzing the calculated β that the impact of the replacement ratio of recycled aggregate and the content of mixed fibers on β was significantly different. Considering the reinforcement ratio mentioned in paper. Matlab was further employed to fit multivariable linear equation regarding recycled aggregate replacement ratio, mixed fibers contents and reinforcement rate as the basis, so that the computation formula of the cyclic loading coefficient β suitable for recycled aggregate concrete columns was revealed.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Cai S (2019) Effect of infills on seismic performance of reinforced concrete frame structures — A full-scale experimental study. Journal of Earthquake Engineering 23(9), DOI: https://doi.org/10.1080/13632469.2017.1387194
Constantine CS, Maniatakis A, Ioannis MT (2016) Application of predictive models to assess failure of museum artifacts under seismic loads. Journal of Cultural Heritage 23, DOI: https://doi.org/10.1016/j.culher.2016.10.001
Fan YJ, Zhao PC, Guo ZQ (2020) Dynamic mechanical properties of variable friction damper based on new piezoelectric ceramic tubular actuator. Journal of Materials Research and Technology 9(5):10909–10915, DOI: https://doi.org/10.1016/j.jmrt.2020.07.061
He S, Deng Z (2019) Seismic behavior of ultra-high performance concrete short columns confined with high-strength reinforcement. KSCE Journal of Civil Engineering 23(12):5183–5193, DOI: https://doi.org/10.1007/s12205-019-0915-3
Hu YX (2006) Earthquake engineering. Seismological Press, Beijing, China, 84–96
Hua Y, Lian JY, Zhou Tai Q (2005) The effect of length-diameter ratio on the mechanical properties of hybrid fiber reinforced concrete. Journal of Building Materials (01):71–76
Johan S, Tobias G (2018) Reliability-based alarm thresholds for structures analysed with the finite element method. Structural Safety 76:174–183, DOI: https://doi.org/10.1016/j.strusafe.2018.09.004
Ketson RM, Dos S, Olga B, Ioannis AK (2020) Spectral identification of nonlinear multi-degree-of-freedom structural systems with fractional derivative terms based on incomplete non-stationary data. Structural Safety 86, DOI: https://doi.org/10.1016/j.strusafe.2020.101975
Kheira Z, Assia D, Abdelkader M (2020) Study on the microstructure of the new paste of recycled aggregate self-compacting concrete. Materials 13(9), DOI: https://doi.org/10.3390/ma13092114
Li B, Li H, Siahkouhi M (2020) Study on coupling of glass powder and steel fiber as silica fume replacement in ultra-high performance concrete: Concrete sleeper admixture case study. KSCE Journal of Civil Engineering 24(5):1545–1556, DOI: https://doi.org/10.1007/s12205-020-0832-5
Liu Y, Guo ZX, Huang QX (2010) Research on damage model test of steel reinforced concrete columns. Journal of Wuhan University of Technology (09):203–207, DOI: https://doi.org/10.3963/j.issn.1671-4431.2010.09.048
Ma SC, Tang ZQ, Li XQ, Liu XG (2006) Strengthening experimental research on reinforced concrete with silica fume. Concrete 11:36–38
Feng X, Kunnath SK, Haowu L (2005) Seismic behavior of concrete filled steel tubular arch structures. Earthquake Engineering and Engineering Vibration 4:107–115, DOI: https://doi.org/10.1007/s11803-005-0029-4
Sharba AA (2019) The efficiency of steel slag and recycled concrete aggregate on the strength properties of concrete. KSCE Journal of Civil Engineering 23(11):4846–4851, DOI: https://doi.org/10.1007/s12205-019-0700-3
Sun ZY, Wu G, Zhang J, Zeng YH, Xiao WC (2017) Experimental study on concrete columns reinforced by hybrid steel-fiber reinforced polymer (FRP) bars under horizontal cyclic loading. Construction and Building Materials 130, DOI: https://doi.org/10.1016/j.conbuildmat.2016.10.001
Xiao JZ, Li JB, Sun ZP (2004) Study on the compressive strength of recycled aggregate concrete. Journal of Tongji University 32:1558–1561, DOI: https://doi.org/10.3321/j.issn:0253-374X.2004.12.002 (in Chinese)
Zhang X, Kuang X, Yang J (2019) Bearing capacity of stone-lightweight aggregate concrete-filled steel tubular stub column subjected to axial compression. KSCE Journal of Civil Engineering 23(7):3122–3134, DOI: https://doi.org/10.1007/s12205-019-2287-0
Acknowledgments
This work was supported by the National Natural Science Foundation of China (51808046); Natural Science Foundation of Shaanxi Province (2020JM-259, 2020JQ-193,2020JM-261); Hightech research project of central university (S202052008036).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Fan, Y., Guo, Z., Wang, Y. et al. Experimental Study of Seismic Damage with Park-Ang Model for Recycled Aggregate Concrete Columns. KSCE J Civ Eng 25, 3401–3408 (2021). https://doi.org/10.1007/s12205-021-1110-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-021-1110-x