The effect of mixing and free-floating carrier media on bioaerosol release from wastewater: a multiscale investigation with Bacillus globigii†
Abstract
Aeration tanks in wastewater treatment plants (WWTPs) are significant sources of bioaerosols, which contain microbial contaminants and can travel miles from the site of origin, risking the health of operators and the general public. One potential mitigation strategy is to apply free-floating carrier media (FFCM) to suppress bioaerosol emission. This article presents a multiscale study on the effects of mixing and FFCM on bioaerosol release using Bacillus globigii spores in well-defined liquid media. Bioaerosol release, defined as percentage of spores aerosolized during a 30 minute sampling period, ranged from 6.09 × 10−7% to 0.057%, depending upon the mixing mode and intensity. Bioaerosol release increased with the intensity of aeration (rotating speed in mechanical agitation and aeration rate in diffused aeration). A surface layer of polystyrene beads reduced bioaerosol released by >92% in the bench-scale studies and >74% in the pilot-scale study. This study discovered strong correlations (R2 > 0.82) between bioaerosol release and superficial gas velocity, Froude number, and volumetric gas flow per unit liquid volume per minute. The Reynolds number was found to be poorly correlated with bioaerosol release (R2 < 0.5). This study is a significant step toward the development of predictive models for full scale systems.
Please wait while we load your content...
