Abstract
Biocomposites have received a great deal of attention in academic research and industry because they are environmentally friendly and produce less carbon footprint, especially with the use of natural fibers. Nevertheless, compatibility issues require complexity to overcome the field of composite materials. Biocomposites based from poly(lactic acid) (PLA), natural rubber (NR) and kenaf were prepared by melt blending in an internal mixer. PLA/NR composition was fixed at 90/10 (wt/wt), while kenaf loading varied from 0 to 20 phr. The aim of this work was to study the effect of epoxidized natural rubber (ENR) and poly(methyl methacrylate) (PMMA) addition as co-compatibilizers in the biocomposites. Rheological behavior during mixing showed higher processing torque and stabilization torque after compatibilization. The mechanical properties deteriorated with increasing kenaf loading in biocomposites. Incorporation of rigid kenaf particles within matrix resulted in poor stress transfer and restricted chain movement. Addition of compatibilizer increased the tensile strength, elongation-at-break, tensile modulus and impact strength. Upon compatibilization, the interfacial interaction between kenaf and matrix is improved, enabling more efficient stress transfer, thus higher mechanical properties. Water absorption of biocomposites was studied by immersion in distilled water for 30 days. At high kenaf loading, water absorption percentage increased due to hydrophilic nature of kenaf. After compatibilization, water absorption decreased due to better interfacial adhesion. Morphological study of tensile fractured and impact fractured surface of biocomposites was investigated using scanning electron microscopy. Less fiber pull-out, more work of fracture and less interfacial gap between fiber and matrix were observed for compatibilized biocomposites, indicating enhanced interfacial adhesion. Addition of ENR and PMMA in PLA/NR/KF biocomposites was able to pare down the compatibility issues, contributing to improvement of overall properties.
Similar content being viewed by others
References
Thompson RC, Moore CJ, Vomsaal FS, Swon SH (2009) Plastics, the environment and human health: current consensus and future trends. Philos Trans R Soc B 364:2153–2166
Ojeda T (2013) Polymers and the environment. In: Yilmaz F (ed) Polymer science. InTech, Croatia
Zinatloo-Ajabshir S, Morassaei MS, Amiri O, Salavati-Niasari M, Foong LK (2020) Nd2Sn2O7 nanostructure: green synthesis and characterization using date palm extract, a potential electrochemical hydrogen storage material. Ceram Int 46:17186–17196
Morassaei MS, Zinatloo-Ajabshir S, Salavati-Niasari M (2016) New facile synthesis, structural and photocatalytic of NdOCl–Nd2Sn2O7–SnO2 nanocomposites. J Mol Liq 220:902–909
Zinatloo-Ajabshir S, Zinatloo-Ajabshir Z, Salavati-Niasari M, Bagheri S, Abd Hamid SB (2016) Facile preparation of Nd2Zr2O7–ZrO2 nanocomposites as an effective photocatalyst via a new route. J Energy Chem 26:315–323
Zinatloo-Ajabshir S, Ghasemian N, Mousavi-Kamazani M, Salavati-Niasari M (2021) Effect of zirconia on improvinfNOx reduction efficiency of Nd2Sn2O7 nanostructure fabricated by a new, facile and green sonochemical approach. UltrasonSonochem 71:105376
Farah S, Anderson DG, Langer R (2016) Physical and mechanical properties of PLA, their functions in widespread applications—a comprehensive review. Adv Drug Deliv Rev 107:367–392
Piemonte V (2012) Polylactic acid: synthesis, properties and applications. Nova Science Publishers, New York
Yang Y, Zhang L, Xiong Z, Tang Z, Zhang R, Zhu J (2016) Research progress in the heat resistance, toughening and filling modification of PLA. Sci China Chem 59:1355–1368
Rajan KP, Thomas SP, Gopanna A, Al-Ghamdi A, Chavali M (2018) Polyblends and composites of polylactic acid (PLA): a review on the state of art. J Polym Sci Eng 1:1–15
Zaaba NF, Ismail H (2019) A review on tensile and morphological properties of poly (lactic acid) (PLA)/thermoplastic starch (TPS) blends. Polym Plast Technol Mater 58:1945–1964
Sangeetha VH, Varghese TO, Nayak SK (2019) Isolation and characterization of nanofibrillated cellulose from wate cotton: effects on thermo-mechanical properties of polylactic acid/ MA-g-SEBS blends. Iran Polym J 28:673–683
Raisipour-Shirazi A, Ahmaddi Z, Garmabi H (2018) Polylactic acid nanocomposites toughened with nanofibrillated cellulose: microstructure, thermal and mechanical properties. Iran Polym J 27:785–794
Sookprasert P, Hinchiranan N (2015) Preparation of natural rubber-graft-poly (lactic acid) used as a compatibilizer for poly (lactic acid)/NR blends. Macromol Symp 354:125–130
Chumeka W, Pasetto P, Pilard J, Tanrattanakul V (2014) Bio-based triblock copolymers from natural rubber and poly (lactic acid): synthesis and application in polymer blending. Polymer 55:4478–4487
Thongpin C, Klatsuwan S, Borkchaiyapoom P, Thongkamwong S (2013) Crystallization behavior of PLA in PLA/NR compared with dynamic vulcanized PLA/NR. J Met Mater Miner 23:53–59
Yuan D, Chen Z, Xu C, Chen K, Chen Y (2015) Fully biobased shape memory material based on novel co-continuous structure in poly(lactic acid)/natural rubber TPVs fabricated via peroxide-induced dynamic vulcanization and in situ interfacial compatibilization. ACS Sustain Chem Eng 3:2856–2865
Ismail H, Abdul Majid R, Mat Taib R (2016) Effects of dynamic vulcanization and swelling properties of poly (vinyl chloride) (PVC)/epoxidized natural rubber (ENR)/kenaf core powder composites. J Vinyl Add Technol 22:206–212
Chanthot P, Kaephimmueang N, Larpsuriyakul P, Pattamprom C (2021) The effect of dynamic vulcanization systems on the mechanical properties and phase morphology of PLA/NR reactive blends. J Polym Res 28:34
Huang Y, Zhang C, Pan Y, Wang W, Jiang L, Dan Y (2012) Study on the effect of dicumyl peroxide on structure and properties of poly (lactic acid)/natural rubber blend. J Polym Environ 21:375–387
Abdullah Sani NS, Arsad A, Rahmah AR, Mohammad NNB (2015) Effect of compatibilizer on thermal and mechanical properties of PLA/NR blends. Mater Sci Forum 819:241–245
Yussof AA, Massoumi I, Hassan A (2010) Comparison of polylactic acid/ kenaf and polylactic acid/rice husk composites: The influence of the natural fibers on the mechanical, thermal and biodegradability. J Polym Environ 18:422–429
Dehbari N, Moazeni N, Wan Abdul Rahman WA (2014) Effects of kenaf core on properties of poly (lactic acid) bio-composite. Polym Compos 35:1220–1227
Alias NF, Ismail H, Ishak KMK (2020) Tailoring properties of polylactic acid/rubber/kenaf biocomposites: effects of types of rubber and kenaf loading. BioRes 15:5679–5695
Bitinis N, Verdejo R, Cassagnau P, Lopez-Manchado MA (2011) Structure and properties of polylactide/natural rubber blends. Mater Chem Phys 129:823–831
Jaratrotkamjorn R, Khaokong C, Tanrattanakul V (2011) Toughness enhancement of poly (lactic acid) by melt blending with natural rubber. J Appl Polym Sci 124:5027–5036
Pongtanayut K, Thongpin C, Santawidee O (2013) The effect rubber on morphology, thermal properties and mechanical properties of PLA/NR and PLA/ENR blends. Energy Proc 34:888–897
Abdul Majid R, Ismail H, Mat Taib R (2014) Effects of polyethylene grafted maleic anhydride on the mechanical, morphological and swelling properties of polyvinyl chloride/epoxidized natural rubber/kenaf core powder composites. BioRes 9:7059–7072
Chen RS, Ab Ghani MH, Ahmad S, Salleh MN, Tarawneh MA (2014) Rice husk flour biocomposites based on recycled high-density polyethylene/polyethylene terephthalate blend: effect of high filler loading on physical, mechanical and thermal properties. J Compos Mater 49:1241–1253
Stelescu M-D, Manaila E, Cracium G, Chirila C (2017) Development and characterization of polymer eco-composites based on natural rubber reinforced with natural fibers. Materials 10:787
Noranizan IA, Ahmad I (2012) Effect of fiber loading and compatibilizer on rheological, mechanical and morphological behaviors. Open J Polym Chem 2:31–41
Bijarimi M, Ahmad S, Rasid R (2014) Mechanical, thermal and morphological properties of poly (lactic acid)/epoxidized natural rubber blends. J Elastom Plast 46:338–354
Salmah H, Koay SC, Hakimah O (2012) Surface modification of coconut shell powder filled polylactic acid biocomposites. J Thermoplast Compos Mater 26:809–819
Righetti MC, Cinelli P, Mallegni N, Massa CA, Bronco S, Andreas S, Lazzeri A (2019) Thermal, mechanical and rheological properties of biocompites made of poly (lactic acid) and potato pulp powder. Int J Mol Sci 20:674
Nanthakumar K, Yeng CM, Chun KS (2018) Tensile and water absorption properties of solvent cast biofilms of sugarcane leaves fibers-filled poly (lactic acid). J Thermoplast Compos Mater 33:289–304
Pang AL, Ismail H, Abu Bakar A (2020) Effect of lysisne treatment on the properties of linear low-density polyethylene/poly (vinyl alcohol)/kenaf composites. Bio Res 15:1915–1926
Tiwari P, Choudhary S, Choudhary M (2015) Study on mechanical, thermal and morphological properties of PHA filled PVC composite. Int J Sci Eng Appl Sci 1:265–281
Wu F, Misra M, Mohanty AK (2019) Super toughened poly (lactic acid)-based ternary blends via enhancing interfacial compatibility. ACS Omega 4:1955–1968
Yao F, Wu Q, Lei Y, Xu Y (2008) Rice straw fiber-reinforced high-density polyethylene composite: effect of fiber type and loading. Ind Crop Prod 28:63–72
Xian Y, Ma D, Wang C, Wang G, Smith L, Cheng H (2018) Characterization and research on mechanical properties of bamboo plastic composites. Polymers 10:814
Cao XV, Ismail H, Rashid AA, Takeichi T, Vo-Huu T (2014) Effect of filler surface treatment on the properties of recycled high-density polyethylene/natural rubber/kenaf powder biocomposites. J Vinyl Add Technol 20:218–224
Acknowledgements
The authors acknowledge the financial support from the USM Fellowship Scheme and RUI-grant (1001/PBahan/8014150). The authors would like to express their gratitude to School of Materials and Mineral Resources Engineering, Universiti Sains Malaysia for the scientific assistance.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Alias, N.F., Ismail, H. & Ishak, K.M.K. Poly(lactic acid)/natural rubber/kenaf biocomposites production using poly(methyl methacrylate) and epoxidized natural rubber as co-compatibilizers. Iran Polym J 30, 737–749 (2021). https://doi.org/10.1007/s13726-021-00927-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13726-021-00927-8