We propose a mathematical model of production of multilayer filtering porous permeable materials (PPM) with variable porosity by the method of dry radial-isostatic pressing of ShKh15 steel powder together with a pore-forming material. We find the distribution of density along the radius of a hollow PPM obtained by radial-isostatic pressing. On the basis of theoretical calculations, we analyze the factors responsible for the inhomogeneity of the distribution of porosity in PPM. The fact that the distribution of porosity in a cylindrical pressed PPM is inhomogeneous is established and confirmed by the results of computer simulations. It is shown that the degree of porosity increases with the radius.
Similar content being viewed by others
References
O. P. Reut, L. S. Boginskii, and E. E. Petyushik, Dry Isostatic Pressing of Compacted Materials [in Russian], Vysheish. Shkola, Minsk (1998).
V. D. Rud, O. Yu. Povstianoi, O. V. Zabolotnyi, and L. S. Boginskyi, Technologies, Structure, Properties of Porous Permeable Materials [in Ukrainian], Vezha, Luts’k (2016).
L. Pilinevich, “Effect of vibration parameters on a formation process and properties of porous powder materials,” in: Proc. of the 1998 Powder Metallurgy World Congress & Exhibition, 5, EPMA, Shrewsbury (1998), pp. 231–234.
M. Aydin, G. Balik, A. F. Miguel, and A. H. Reis, “Some features of flow and particle transport in porous structures,” J. Mech. Eng., No. 51, 495–500 (2005).
Z. Li, J. Song, Y. Long et al., “Large-scale blow spinning of heat-resistant nanofibrous air filters,” Nano Res., No. 2, 45–54 (2020).
M. Chern and N. Vaziri, “Effect of porous media on hydraulic jump characteristics by using smooth particle hydrodynamics method,” Int. J. Civ. Eng., No. 18, 367–379 (2020).
V. D. Rud, T. N. Halchuk, and O. Yu. Povstianoi, A Method for the Production of Metal Powders from Sludge Wastes of the Bearing Production [in Ukrainian], Patent of Ukraine, No. 63558 A MPK 7 B22F9/04, Publ. on 15.01.2004; Byul. No. 1.
O. Yu. Povstyanoi, V. D. Rud', L. M. Samchuk, and N. T. Zubovets’ka, “Production of porous materials with the use of energysaving technologies,” Fiz.-Khim. Mekh. Mater., 51, No. 6, 87–92 (2016); English translation: Mater. Sci., 51, No. 6, 847–853 (2016).
P. A. Vityaz, V. M. Kaptsevich, and R. A. Kusin, Filtering Materials: Properties, Domains of Application, and Technology of Production [in Russian], Sci.-Res. Institute of Powder Metallurgy, Minsk (1999).
O. Yu. Povstianoi, Improvement of the Technology of Production of Porous Powder Materials with the Use of the Wastes of commercial Production [in Ukrainian], Candidate-Degree Thesis (Engineering), Lutsk (2007).
E. A. Nastenko and E. A. Pavlov, “Multicriterial algorithm of stepwise regression,” Kibern. Obchysl. Tekh., No. 179, 45–56 (2015).
O. Yu. Povstianoi and A. V. Kuz’mov, Computer Program “Modeling of Pressing of Multilayer Filters (Filter N)” [in Ukrainian], Authors’ Certificate No. 68842, 29.11.2016.
O. Povstyanoy, O. Zabolotnyi, V. Rud, A. Kuzmov, and H. Herasymchuk, “Modeling of processes for creation new porous permeable materials with adjustable properties,” in: Advances in Design, Simulation, and Manufacturing. DSMIE-2019. Lecture Notes in Mechanical Engineering, Springer, Cham (2020), pp. 456–465; https://doi.org/10.1007/978-3-030-22365-6_46.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 56, No. 4, pp. 88–92, July–August, 2020.
Rights and permissions
About this article
Cite this article
Povstianoi, O.Y., Rud, V.D., Imbirovych, N.Y. et al. Optimization of the Properties of Multilayer Porous Permeable Materials. Mater Sci 56, 530–535 (2021). https://doi.org/10.1007/s11003-021-00460-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-021-00460-2