We experimentally constructed and computed thermokinetic diagrams of decomposition of supercooled austenite of Ramor-500 and Armox-500 armor steels. The temperatures of phase transformations, microstructure, and mechanical properties of the metal of the heat-affected zone are determined as a result of the simulation of thermal deformation welding at different cooling rates in a Gleeble-3800 installation. We determine the limit values of the cooling rate when the metal of the near-weld zone of welded joints of these steels can be softened down to a level lower than the minimum guaranteed characteristics of strength of the base metal.
Similar content being viewed by others
References
O. A. Slyvins’kyi, S. P. Bisyk, and O. V. Chernozubenko, “Weldability and operating characteristics of foreign armor steels,” in: Proc. of the 6th Internat. Sci.-Pract. Conf. [in Ukrainian], Kyiv (2016), pp. 167–169.
О. А. Haivorons’kyi, V. D. Poznyakov, L. І. Markashova, О. P. Ostash, V. V. Kulyk, Т. О. Alekseenko, and О. S. Shyshkevych, “Structure and mechanical properties of the heat-affected zone of restored railway wheels,” Fiz.-Khim. Mekh. Mater., 51, No. 4, 114–119 (2015); English translation: Mater. Sci., 51, No. 4, 563–569 (2016).
О. P. Ostash, V. V. Kulyk, V. D. Poznyakov, О. А. Gaivorons’kyi, and V. V. Vira, “Influence of the modes of heat treatment on the strength and cyclic crack-growth resistance of 65G steel,” Fiz.-Khim. Mekh. Mater., 54, No. 6, 24–29 (2018); English translation: Mater. Sci., 54, No. 6, 776–782 (2019).
O. Berdnikova, V. Pozniakov, A. Bernatskyi, T. Alekseienko, and V. Sydorets, “Effect of the structure on the mechanical properties and cracking resistance of welded joints of low-alloyed high-strength steels,” Proc. Struct. Integrity, 16, 89–96 (2019).
M. Balakrishnan, V. Balasubramanian, and G. Madhusudhan Reddy, “Microstructural analysis of ballistic tests on welded armor steel joints,” Metallogr. Microstruct. Anal., 2, 125–139 (2013).
V. D. Poznyakov, А. А. Haivoronskii, V. A. Kostin, V. V. Durachenko, and Yu. N. Kostin, “Specific features of the austenite transformation and mechanical properties of the metal in the heat-affected zone of joints of71 armor steel in arc welding,” Mekh. Mashynobuduv., No. 1, 254–260 (2017).
V. А. Kostin, H. М. Hryhorenko, V. D. Poznyakov, and T. O. Zuber, “Structural transformations of the metal of heat-affected zone of welded joints of high-strength armor steels,” Fiz.-Khim. Mekh. Mater., 55, No. 6, 78–83 (2019); English translation: Mater. Sci., 55, No. 6, 863–869 (2020).
N. Saunders and A. P. Miodownik, CALPHAD (Calculation of Phase Diagrams): A Comprehensive Guide, Pergamon Press, London (1998).
G. M. Grigorenko, V. A. Kostin, and V. Yu. Orlovskii, “Contemporary possibilities of modeling of austenite transformations in the welds of low-alloyed steels,” Avtomat. Svarka, No. 3, 31–34 (2008).
J. S. Kirkaldy and D. Venugopalan, “Prediction of microstructure and hardenability in low alloy steels,” Internat. Conf. on Phase Transformations in Ferrous Alloys, Philadelphia (1983), pp. 125–148.
B. Buchmayr and J. S. Kirkaldy, “Modeling of the temperature field, transformation behavior, hardness, and mechanical response of low alloy steels during cooling from the austenite region,” J. Heat Treat., 8, No. 2, 127–136 (1990).
J.-B. Leblond and J. Devaux, “A new kinetic model for anisothermal metallurgical transformations in steel including effect of austenite grain size,” Acta Metall., 32, No. 1, 137–146 (1984).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 56, No. 4, pp. 36–43, July–August, 2020.
Rights and permissions
About this article
Cite this article
Kostin, V.А., Poznyakov, V.D., Berdnikova, O.М. et al. Influence of Structural Transformations on the Mechanical Properties of Welded Joints of Armor Steels. Mater Sci 56, 472–480 (2021). https://doi.org/10.1007/s11003-021-00453-1
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-021-00453-1