Abstract
The mechanism of fracture of the plasma thermal barrier coatings made of mixtures of zirconia and yttria (5.5 and 7%) powders in the form of solid and hollow spherical particles is studied by sclerometry. The fracture of the coatings is found to occur in the upper layers according to a cohesive mechanism. The coating formed from a powder mixture of the composition ZrO2 + 7% Y2O3 consisting of solid spherical particles has the optimum set of properties.
Similar content being viewed by others
REFERENCES
L. B. Getsov, Materials and Strength of Gas Turbine Parts. Book 1 (ID Gazov. Tekhnol., Moscow, 2010).
D. A. Chubarov and S. A. Budinovskii, “Choice of ceramic material for thermal barrier coatings of aircraft turbine blades for operating temperatures up to 1400°C,” Trudy VIAM, No. 4, 48–53 (2015).
Y. P. Tarasenko, I. N. Tsareva, O. B. Berdnik, Ya. A. Fel, and V. I. Kuz’min, “Zirconia dioxide thermal insulation coatings obtained by highly energized plasma spray,” J. Mach. Manuf. Reliab. 44 (4), 378–383 (2015).
I. N. Tsareva, O. B. Berdnik, and Y. P. Tarasenko, “About properties of ZrO2 thermal protective coatings obtained from spherical powder mixtures,” J. Phys.: Conf. Ser. 857 (1), 012004 (2017).
V. I. Kuz’min, E. V. Kartaev, S. P. Vashchenko, D. V. Sergachev, and E. E. Kornienko, “Improving the efficiency of plasma deposition of powder coatings,” Vestn. YuGU, No. 2 (33), 7–14 (2014).
K. S. Selivanov, “Scratch test estimation of the strength of the surface material,” Vestn. YuGATU, 19 (1(67)), 100–106 (2015).
V. V. Semenychev and R. K. Salakhova, “Estimation of the adhesion of a nickel–cobalt coating to glass or carbon fiber reinforced plastic by scratching,” Trudy VIAM, No. 7 (43), 48–57 (2016).
Funding
The work was carried out within the Russian State Task for Fundamental Scientific Research for 2021–2023 (the topic no. 0030-2021-0025).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by K. Shakhlevich
Rights and permissions
About this article
Cite this article
Tsareva, I.N., Maksimov, M.V. & Berdnik, O.B. Fracture Mechanism of Plasma Thermal Barrier Coatings Made of Zirconia-Based Powder Mixtures of Various Morphologies. Russ. Metall. 2021, 386–391 (2021). https://doi.org/10.1134/S0036029521040352
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029521040352