• Open Access

Topolectric circuits: Theory and construction

Junkai Dong, Vladimir Juričić, and Bitan Roy
Phys. Rev. Research 3, 023056 – Published 19 April 2021

Abstract

We highlight a general theory to engineer arbitrary Hermitian tight-binding lattice models in electrical LC circuits, where the lattice sites are replaced by the electrical nodes, connected to its neighbors and to the ground by capacitors and inductors. In particular, by supplementing each node with n subnodes, where the phases of the current and voltage are the n distinct roots of unity, one can in principle realize arbitrary hopping amplitude between the sites or nodes via the shift capacitor coupling between them. This general principle is then implemented to construct a plethora of topological models in electrical circuits, topolectric circuits, where the robust zero-energy topological boundary modes manifest through a large boundary impedance, when the circuit is tuned to the resonance frequency. The simplicity of our circuit constructions is based on the fact that the existence of the boundary modes relies only on the Clifford algebra of the corresponding Hermitian matrices entering the Hamiltonian and not on their particular representation. This in turn enables us to implement a wide class of topological models through rather simple topolectric circuits with nodes consisting of only two subnodes. We anchor these outcomes from the numerical computation of the on-resonance impedance in circuit realizations of first-order (m=1), such as Chern and quantum spin Hall insulators, and second- (m=2) and third- (m=3) order topological insulators in different dimensions, featuring sharp localization on boundaries of codimensionality dc=m. Finally, we subscribe to the stacked topolectric circuit construction to engineer three-dimensional Weyl, nodal-loop, quadrupolar Dirac, and Weyl semimetals, respectively, displaying surface- and hinge-localized impedance.

  • Figure
  • Figure
  • Figure
  • Figure
  • Figure
  • Figure
  • Figure
12 More
  • Received 1 September 2020
  • Revised 28 January 2021
  • Accepted 1 April 2021
  • Corrected 21 April 2021

DOI:https://doi.org/10.1103/PhysRevResearch.3.023056

Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI. Open access publication funded by the Max Planck Society.

Published by the American Physical Society

Physics Subject Headings (PhySH)

Condensed Matter, Materials & Applied Physics

Corrections

21 April 2021

Correction: The title contained a typographical error and has been fixed.

Authors & Affiliations

Junkai Dong1,2, Vladimir Juričić3,4, and Bitan Roy1,5,*

  • 1Max-Planck-Institut für Physik komplexer Systeme, Nöthnitzer Str. 38, 01187 Dresden, Germany
  • 2Laboratory of Atomic and Solid State Physics, Cornell University, Ithaca, New York 14853, USA
  • 3Nordita, KTH Royal Institute of Technology and Stockholm University, Roslagstullsbacken 23, 10691 Stockholm, Sweden
  • 4Departamento de Física, Universidad Técnica Federico Santa María, Casilla 110, Valparaíso, Chile
  • 5Department of Physics, Lehigh University, Bethlehem, Pennsylvania 18015, USA

  • *Corresponding author: bitan.roy@lehigh.edu

Article Text

Click to Expand

References

Click to Expand
Issue

Vol. 3, Iss. 2 — April - June 2021

Subject Areas
Reuse & Permissions
Author publication services for translation and copyediting assistance advertisement

Authorization Required


×
×

Images

×

Sign up to receive regular email alerts from Physical Review Research

Reuse & Permissions

It is not necessary to obtain permission to reuse this article or its components as it is available under the terms of the Creative Commons Attribution 4.0 International license. This license permits unrestricted use, distribution, and reproduction in any medium, provided attribution to the author(s) and the published article's title, journal citation, and DOI are maintained. Please note that some figures may have been included with permission from other third parties. It is your responsibility to obtain the proper permission from the rights holder directly for these figures.

×

Log In

Cancel
×

Search


Article Lookup

Paste a citation or DOI

Enter a citation
×