Skip to main content
SpringerLink
Log in

Introducing a new classification of soft rocks based on the main geological and engineering aspects

  • Original Paper
  • Published:
Bulletin of Engineering Geology and the Environment Aims and scope Submit manuscript

Abstract

Soft rock masses represent a significant percentage of rock material on the earth’s crust. The engineering properties of these rocks are related to their composition, geological history, and degree of weathering. Mudrocks (claystone, mudstone, argillite), marl, shale, sandstone, and conglomerates with weak cementing material are the most common example of these rocks which can be subjected to a wide variation of their engineering properties. Generally, they can be grouped in a broad sense, as geological materials with very low intact rock properties, namely, high deformability and low strength that span the range between soils and hard rocks. This paper is organized to suggest a classification for these rocks, dealing with the main geological and engineering aspects and features that characterize these materials. The two indices of soft rock number (SRN) and soft rock activity (SRA) have been introduced in this classification. The SRN is obtained based on the geomechanical properties of soft rocks, and it is within a range from 0 to 100 (0 for very weak rocks and 100 for strong ones). On the other hand, the SRA index, which indicates how rocks respond to disturbance, is calculated using an empirical graph. This index can have values from 0 to 1. If the index is closer to 0, the rock mass will be less sensitive to disturbance. Based on the two indices, the weakest group of soft rocks, which is called swelling soft rocks, has SRNs less than 20 and SRAs higher than 0.8. Excavation of these rocks can be accompanied by various types of failures. Moreover, in high-strength soft rocks, SRNs and SRAs have values higher than 80 and lower than 0.25, respectively. These rocks have good geomechanical properties and the lowest sensitivity to disturbance, so excavation them results in the fewest failures.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16

Similar content being viewed by others

References

  • Ballas G, Garziglia S, Sultan N, Pelleter E, Toucanne S, Marsset T, Riboulot V, Ker S (2018) Influence of early diagenesis on geotechnical properties of clay sediments (Romania, Black Sea). Engineering Geology Journal 240:175–188. https://doi.org/10.1016/j.enggeo.2018.04.019

    Article  Google Scholar 

  • Barla G, Forlati F, Zaninetti A (1990) Laboratory tests on rocks: issues and examples. MIR 90. Torino 4-1:4–47

    Google Scholar 

  • Bieniawski ZT (1984) Rock Mechanics design in mining and tunneling. Balkema, Boston

    Google Scholar 

  • Bilgin N, Copur H, Balci C, 2016. TBM excavation in difficult ground conditions case studies from Turkey. 341 p.

  • Ciantia MO, Castellanza R, Crosta GB, Hueckel T (2015) Effects of mineral suspension and dissolution on strength and compressibility of soft carbonate rocks. Eng Geol 184:1–18. https://doi.org/10.1016/j.enggeo.2014.10.024

    Article  Google Scholar 

  • Crosta G (1998) Slake durability vs ultrasonic treatment for rock durability determinations. Int J Rock Mech Min Sci 35(6):815–824 1998

    Article  Google Scholar 

  • Descamps F, Gomord OF, Vandycke S, Schroeder C, Swennen R, Tshibangu JP (2017) Relationships between geomechanical properties and lithotypes in NW European chalks. In: Geomechanics and Geology, vol 458. Geological Society, London, Special Publications. https://doi.org/10.1144/SP458.9

    Chapter  Google Scholar 

  • Dhakal G, Yoneda T, Kato M, Kaneko K (2002) Slake durability and mineralogical properties of some pyroclastic and sedimentary rocks. Engineering Geology Journal 65:31–45

    Article  Google Scholar 

  • Dobereiner L (1984) Engineering geology of weak sandstones [PhD thesis]. University of London, p 471

  • Dong F, Lu S, Gao S (1987) Discussion on roadway surrounding rock condition and supporting theory. Ground Pressure 2:12–15

    Google Scholar 

  • Franklin JA, Chandra R (1972) The slake-durability test, the slake-durability test. Int J Rock Mech Min Sci 9:325–341 Pergamon Press 1972. Printed in Great Britain

    Article  Google Scholar 

  • Frolova J, Ladygin V, Rychagov S, Zukhubaya D (2014) Effects of hydrothermal alterations on physical and mechanical properties of rocks in the Kuril-Kamchatka, island arc. Eng Geol 183:80–95

    Article  Google Scholar 

  • Gonzalez de Vallejo LI, Ferrer M, Ortuño L, Oteo C (2002) Ingeneria geologica. Pearson Education, Madrid, p 744

    Google Scholar 

  • Harrigan KR (1985) An application of clustering for strategic group analysis. Strateg Manag J 6:55–73

    Article  Google Scholar 

  • Hashemnejad A, Ghafori M, Tarigh Azali S, 2015. Utilizing water, mineralogy and sedimentary properties for predicting LCPC abrasivity coefficient (LAC), Bulletin of Engineering Geology and the Environment, (DOI) https://doi.org/10.1007/s10064-015-0779-9.

  • Hashemnejad A, Fatemi Aghda SM, Talkhablou SM, 2020. Mechanized tunnelling in hydrothermally altered grounds; the effect of hydrothermal fluids on the rock behaviour in the central Iran. Tunnelling and Underground Space Technology 99. https://doi.org/10.1016/j.tust.2020.103340

  • Hassanpour J, Rostami J, Zhao J (2011) A new hard rock TBM performance prediction model for project planning. Tunn Undergr Space Technol 26:595–603. https://doi.org/10.1016/j.tust.2011.04.004

    Article  Google Scholar 

  • Hassanpour J, Firouzei Y, Hajipour G, 2017. A regional-scale engineering geological study for selecting suitable rock masses for constructing unlined oil storage caverns in Southern Zagros, Iran. Bull Eng. Geol. Environ DOI https://doi.org/10.1007/s10064-017-1035-2.

  • He MC, Jing HH, Sun XM (2002) Soft rock engineering mechanics. Science Press, Beijing

    Google Scholar 

  • Huang F, Zhu H, Xu Q, Cai Y, Zhuang X (2013) The effect of weak interlayer on the failure pattern of rock mass around tunnel–scaled model tests and numerical analysis. Tunn Undergr Space Technol 35:207–218. https://doi.org/10.1016/j.tust.2012.06.014

    Article  Google Scholar 

  • ISRM (1981) Rock characterization testing and monitoring. In: International Society for Rock Mechanics. Pergamon Press, New York, p 211

    Google Scholar 

  • Jeremias FT, Olarte JM, Pinho AB, Duarte IMR, Saroglou H, Suarez MCT, 2020. Mudrocks as soft rocks: properties and characteristics, Soft Rock Mechanics and Engineering, ISBN 978-3-030-29476-2 ISBN 978-3-030-29477-9 (eBook) https://doi.org/10.1007/978-3-030-29477-9

  • Johnston IW 1993. Geomechanics and the emergence of soft rock technology. Australian Geomechanics, 3-13.

  • Kanji MA (2014) Critical issues in soft rocks. J Rock Mech Geotech Eng 6(3):186–195

    Article  Google Scholar 

  • Lafrance N, Auvray C, Souley M, Labiouse V (2016) Impact of weathering on macro-mechanical properties of chalk: local pillar-scale study of two underground quarries in the Paris Basin. Engineering Geology Journal 213:107–119. https://doi.org/10.1016/j.enggeo.2016.08.014

    Article  Google Scholar 

  • Nickmann M, Spaun G, & Thuro K, 2006. Engineering geological classification of weak rocks. Proceedings of the 10th International IAEG Congress

  • Oilier CD (1983) Weathering or hydrothermal alteration? CATENA 10(1–2):57–59. https://doi.org/10.1016/S0341-8162(83)80004-6

    Article  Google Scholar 

  • Pan Q, Dias D (2018) Three dimensional face stability of a tunnel in weak rock masses subjected to seepage forces. Tunn Undergr Space Technol 71:555–566. https://doi.org/10.1016/j.tust.2017.11.003

    Article  Google Scholar 

  • Pola A, Crosta G, Fusi N, Barberini V, Norini G (2012) Influence of alteration on physical properties of volcanic rocks. Tectonophysics 566-567:67–86. https://doi.org/10.1016/j.tecto.2012.07.017

  • Pola A, Crosta G, Fusi N, Castellanza R (2014) General characterization of the mechanical behaviour of different volcanic rocks with respect to alteration. Eng Geol 169(4):1–13. https://doi.org/10.1016/j.enggeo.2013.11.011

  • Punj G, Stewart DW (1983) Cluster analysis in marketing research: review and suggestions for application. J Mark Res 20(2):134–148

    Article  Google Scholar 

  • Rocha M (1975) Some problems related to the rock mechanics of low strength natural materials. In Proceedings of the 5th Pan-American conference on soil mechanics and foundation engineering, Buenos Aires, pp 489–514

  • Russo G (1994) Some considerations on the applicability of major geomechanical classifications to weak and complex rocks in tunnelling. GEAM 31:63–70

    Google Scholar 

  • Roy DG, Singh TN, Kodikara J (2017) Influence of joint anisotropy on the fracturing behavior of a sedimentary rock. Eng Geol 22813:224–237. https://doi.org/10.1016/j.enggeo.2017.08.016

    Article  Google Scholar 

  • Sadowski GR (2020) The Geology of Soft Rocks. In: Kanji M, He M, Ribeiro e, Sousa L (eds) Soft rock mechanics and engineering. Springer, Cham

    Google Scholar 

  • Sapigni M, Berti M, Bethaz E, Busillo A, Cardone G (2002) TBM performance estimation using rock mass classifications. Int J Rock Mech Min Sci 39:771–788

    Article  Google Scholar 

  • Segev E (2010) Users and uses of Google’s information. Google and the Digital Divide, The Bias of Online Knowledge, Chandos Information, Professional Series 2010:75–110. https://doi.org/10.1016/B978-1-84334-565-7.50004-6

    Article  Google Scholar 

  • Terzaghi K, Peck R (1967) Soil mechanics in engineering practice. Wiley, New York

  • Tucker ME, 2011. Sedimentary rocks in the field: a practical guide. Wiley pub. 4th edition. 288 p

  • Wang WM, Zhao ZH, Wang YJ, Gao X (2013) Failure behavior and constitutive model of weakly consolidated soft rock. Sci World J 2013:8

    Google Scholar 

  • Wang J, Li E, Chen L, Wang J, Tan Y, Duan J, Pu S, Gao L, Han Y, Wang C (2019) Measurement and analysis of the internal displacement and spatial effect due to tunnel excavation in hard rock. Tunn Undergr Space Technol 84:151–165. https://doi.org/10.1016/j.tust.2018.11.001

    Article  Google Scholar 

  • Ward JH (1963) Hierarchical grouping to optimize objective functions. J Am Stat Assoc 58:234–244

    Article  Google Scholar 

  • Wong LNY, Maruvanchery V and Liu G, 2015. Water effects on rock strength and stiffness degradation, Acta Geotechnica, https://doi.org/10.1007/s11440-015-0407-7

  • Worden RH, Morad S (2003) Clay minerals in sandstones: controls on formation, distribution and evolution. In: Worden RH, Morad S, editors. Clay mineral cements in sandstones. International Association of Sedimentologists. Int Assoc Sedimentol Spec Publ 34:3–41

    Google Scholar 

  • Zharikov VA, Rusinov VL (1998) Metasomatism and metasomatic rocks. Publisher “Science World”, Moscow, 492 pp

    Google Scholar 

  • Zhou H, Zhang C, Li Z, Hu D, Hou J (2014) Analysis of mechanical behavior of soft rocks and stability control in deep tunnels. J Rock Mech Geotech Eng 6:219–226

    Article  Google Scholar 

  • Zhu X (1985) View of soft rock roadway support. Coal Sci Technol 8:21–23

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Applied Geology, Faculty of Earth Sciences, Kharazmi University, Tehran, Iran

    Arash Hashemnejad, Seyed Mahmoud Fatemi Aghda & Mehdi Talkhablou

Authors
  1. Arash Hashemnejad
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Seyed Mahmoud Fatemi Aghda
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Mehdi Talkhablou
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Arash Hashemnejad.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Hashemnejad, A., Aghda, S.M.F. & Talkhablou, M. Introducing a new classification of soft rocks based on the main geological and engineering aspects. Bull Eng Geol Environ 80, 4235–4254 (2021). https://doi.org/10.1007/s10064-021-02192-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10064-021-02192-8

Keywords

Search

Navigation