Abstract
Various models are considered in calculating the forces at satellite–pinion contact points in planetary pinion gears. The force distribution over the pinions is calculated for each model, and the results are compared with experimental data. The applicability of the models is assessed.
Similar content being viewed by others
REFERENCES
Sinitsyna, Yu.V., Influence of the kinematics of the gear motor on the specific moment, Evraziiskoe Nauchn. Ob”ed., 2017, vol. 1, no. 10, pp. 56–58.
Shannikov, V.M., Planetarnye reduktory s vnetsentroidnym zatsepleniem (Non-Cycloid Planetary Gearboxes), Leningrad: Mashgiz, 1948.
Kudryavtsev, V.N., Planetarnye peredachi (Planetary Gears), Leningrad: Mashinostroenie, 1966.
Sigov, I.V., Research of the cycloid gearbox, in Peredachi v mahsinostroenii (Gears in Machine Engineering), Moscow: Mashgiz, 1951, pp. 44–58.
Kireev, S.O. and Kovalev, V.N., Struktura, kinematika i geometriya planetarnykh peredach s vnetsentroidnym tsevochnym zatspelniem (The Structure, Kinematics, and Geometry of Non-Cycloid Gearbox), Novocherkassk: Novocherk. Gos. Tekh. Univ., 1995.
Chirkin, A.V., Calculation of the load capacity of cycloid gearbox with plastic satellites, Cand. Sci. (Eng.) Dissertation, Moscow: Bauman State Tech. Univ., 2019.
Thube, S.V. and Bobak, T.R., Dynamic Analysis of a Cycloidal Gearbox Using Finite Element Method: AGMA Technical Paper 12FTM18, Alexandria, VA: Am. Gear Manuf. Assoc., 2012, pp. 1–13.
Sinitsyna, Yu.V. and Ermolaev, M.M., The effect of bearing compliance on the operation of a cycloid gearbox, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 2020, no. 4, pp. 15–22.
Funding
Financial support was provided by the Russian Foundation for Basic Research (project 19-38-90252).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Ermolaev, M.M., Zakharov, M.N. & Sinitsyna, Y.V. Force Distribution in Planetary Pinion Gears. Russ. Engin. Res. 41, 189–193 (2021). https://doi.org/10.3103/S1068798X21030059
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X21030059