Abstract
In this work the activity of samarium(III) acetate was analyzed as a possible initiator in the ring opening polymerization of 2,2-dymetyltrimethylene carbonate. Polymerizations were carried out under solvent-free melt conditions in ampoules-like flasks, equipped with a magnetic stirrer. The effects of temperature, molar ratio monomer to initiator and reaction time on the polymerization features were analyzed. The results indicate that the samarium(III) acetate initiates the polymerization of 2,2-dymetyltrimethylene carbonate, which proceeds up to high conversion and the polymerization rate is first-order with respect to monomer concentration.
Similar content being viewed by others
REFERENCES
M. S. Lindblad, Y. Liu, A. C. Albertsson, E. Ranucci, and S. Karlsson, Adv. Polym. Sci. 157, 139 (2002).
Y. Ikada and H. Tsuji, Macromol. Rapid Commun. 21, 117 (2000).
J. de Oliveira, L. P. S. Vandenberghe, S. F. Zawadzki, C. Rodrigues, J. C. de Carvalho, and C. R. Soccol, “Production and application of polylactides. Current developments in biotechnology and bioengineering,” in Production, Isolation and Purification of Industrial Products, Ed. by A. Pandey, S. Negi, and C. R. Soccol (Elsevier, Netherlands, 2017).
I. Manavitehrani, A. Fathi, H. Badr, S. Daly, A. N. Shirazi, and F. Dehghani, Polymers 8, 20 (2016).
R. P. Brannigan and A. P. Dove, Biomater. Sci. 5, 9 (2017).
M. Vert, Biomacromolecules 6, 538 (2005).
J.-C. Bogaert and P. Coszach, Macromol. Symp. 153, 287 (2000).
M. Niaounakis, Biopolymers Reuse, Recycling, and Disposal (Elsevier, New York, 2013).
M. Vert, S. M. Li, G. Spenlehauer, and P. Guerin, J. Mater. Sci.: Mater. Med. 3, 432 (1992).
R.G. Sinclair, J. Macromol. Sci., Part A: Pure Appl. Chem. 33, 585 (1996).
R. Auras, B. Harte, and S. Selke, Macromol. Biosci. 4, 835 (2004).
A.-C. Albertsson and I. K. Varma, Biomacromolecules 4, 1466 (2003).
K. E. Washington, R. N. Kularatne, V. Karmegam, M. C. Biewer, and M. C. Stefan, WIREs Nanomed. Nanobiotechnol. 9, e1446 (2016).
B. S. Gupta, “Manufacture, types and properties of biotextiles for medical applications,” in Biotextiles as Medicals Implant, Ed. by M. W. King, B. S. Gupta, and R. Guidoin (Woodhead Publ., Series in Textiles, United Kingdom, 2013).
K. J. L. Burg, B. Inskeepm, and T. C. Burg, “Breast tissue engineering: reconstruction implants and three-dimensional tissue test system,” in Principles of Tissue Engineering, Ed. by R. Lanza, R. Langer, and J. Vacanti (Acad. Press; Elsevier Sci. Imprint, New York, 2014).
E. K. Efthimiadou, M. Theodosiou, G. Toniolo, and N. Y. Abu-Thabit, “Stimuli-responsive biopolymer nanocarriers for drug delivery applications,” in Stimuli Responsive Polymeric Nanocarriers for Drug Delivery Applications, Ed. by A. S. Hamdy-Makhlouf and N. Y. Abu-Thabit (Woodhead Publ., United Kingdom, 2018).
A. Kramschuster and L.-S. Turng, “Fabrication of Tissue Engineering Scaffolds,” in Handbook of Biopolymers and Biodegradable Plastics, Ed. by S. Ebnesajjad (Elsevier, Netherland, 2013).
P. I. J. M. Wuisman and T. H. Smit, Eur. Spine J. 15, 133 (2006).
J. C. Middlenton and A. J. Tipton, Biomaterials 2335, 21 (2000).
R. Langer, Acc. Chem. Res. 33, 94 (2000).
A. Merkli, C. Tabatabay, R. Gurny, and J. Heller, Prog. Polym. Sci. 23, 563 (1998).
O. Dechy-Cabaret, B. Martin-Vaca, and D. Bourissou, Chem. Rev. 104, 6147 (2004).
R. H. Platel, L. M. Hodgson, and C. K. Williams, Polym. Rev. 48, 11 (2008).
J. Casas, P. V. Persson, T. Iversen, and A. Córdova, Adv. Synth. Catal. 346, 1087 (2004).
C. Jerome and P. Lecomte, Adv. Drug Delivery Rev. 60, 1056 (2008).
A. P. Dove, Chem. Commun. 48, 6646 (2008).
M. Oshimura, T. Tang, and A. Takasu, J. Polym. Sci., Part A: Polym. Chem. 49, 1210 (2011)
F. Suriano, O. Coulembier, J. L. Hedrick, and P. Dubois, Polym. Chem. 2, 528 (2011).
S. Penczek, M. Cypryk, A. Duda, P. Kubisa, and S. Slomkowski, Prog. Polym. Sci. 32, 247 (2007).
B.J. O’Keefe, M.A. Hillmyer, and W.B. Tolman, J. Chem. Soc., Dalton Trans. 2001, 2215 (2001).
A. P. Gupta and V. Kumar, Eur. Polym. J. 43, 4053 (2007).
H. R. Kricheldorf, I.K. Saunders, and A. Stricker, Macromolecules 33, 702 (2000).
G. Rokicki, Prog. Polym. Sci. 25, 259 (2000).
H. Yasuda, Prog. Polym. Sci. 25, 573 (2000).
L. Piao, M. Deng, X. Chen, L. Jiang, and X. Jing, Polymer 44, 2331 (2003).
F. Yu and R. Zhuo, Polym. J. 36, 28 (2004).
Ch. Wang, H. Li, and X. Zhao, Biomaterials 25, 5797 (2004).
L. Liu, Z. Wei, and M. Qi, Chin. Chem. Lett. 18, 744 (2007).
F. He, Y. Wang, G. Liu, H. Jia, J. Feng, and R. Zhuo, Polymer 49, 1185 (2008).
Y. Wang, L.P. Wang, and L. Shen, Chin. J. Polym. Sci. 28, 509 (2010).
S. Agarwal, C. Mast, K. Dehnicke, and A. Greiner, Macromol. Rapid Commun. 21, 195 (2000).
C. Tsutsumi and H. Yasuda, J. Polym. Sci., Part A: Polym. Chem. 39, 3916 (2001).
J. Ling and Z. Q. Shen, Macromol. Chem. Phys. 203, 735 (2002).
C. Yu, L. Zhang, and Z. Q. Shen, J. Mol. Catal. A: Chem. 212, 365 (2004).
J. Ling, Y. Dai, Y. Zhu, W. Sun, and Z. Shen, J. Polym. Sci., Part A: Polym. Chem. 48, 3807 (2010).
Z. Shen, G. Zhu, and J. Ling, Chin. J. Chem. 20, 1369 (2002).
D. M. Lyubov, A. O. Tolpygin, and A. A. Trifonov, Coord. Chem. Rev. 392, 83 (2019).
Y. Nakayama, H. Yasuda, K. Yamamoto, C. Tsutsumi, R. Jerome, and P. Lecomte, React. Funct. Polym. 63, 95 (2005).
M. Patel, M. Kapadia, and J. Joshi, Eur. Polym. J. 45, 426 (2009).
M. Patel, M. Kapadia, and J. Joshi, J. Polym. Res. 16, 755 (2009).
P. Kapoor, N. Fahmi, and R.-V. Singh, Spectrochim. Acta, Part A 83, 74 (2011).
J.-M. Contreras, D. Medina, F. Lopez-Carrasquero, and R.-R. Contreras, J. Polym. Res. 20, 244 (2013).
M. Monsalve, J. Contreras, E. Cardozo, and R.-R. Contreras, Av. Quim. 10, 129 (2015).
D. Medina, J.-M. Contreras, F. Lopez-Carrasquero, E. Cardozo, and R.-R. Contreras, Polym. Bull. 75, 1253 (2018).
J. Contreras, D. Medina, F. Lopez-Carrasquero, and R.-R Contreras, Curr. Appl. Polym. Sci. 02, 3 (2019).
J.-M. Contreras-Ramírez and M. Monsalve, J. Macromol. Sci., Part A; Pure Appl. Chem. 56(12), 1114 (2019).
M. Monsalve and J. Contreras, Revista Cientifica UNET 26, 67 (2014).
G. Rokicki, A. Piotrowska, and P. Pawłowski, Polym. J. 35, 133 (2003).
S. Agarwal and M. Puchner, Eur. Polym. J. 38, 2365 (2002).
H. R. Kricheldorf, A. Stricker, and Z. Gomurashvili, Macromol. Chem. Phys. 202, 413 (2001).
L.-F. Zhang, Y. Wang, P. Wang, and L.-J. Shen, Sci. China: Chem. 53, 599 (2010).
A. Kowalski, A. Duda, and S. Penczek, Macromolecules 33, 7359 (2000).
R.-F. Storey and J.-W Sherman, Macromolecules 35, 1504 (2002).
M. Hesse, H. Meier, and B. Zeeh, Métodos Espectroscópicos en Química Orgánica (Editorial SINTESIS, Quinta edición, Madrid, 1995) [in Spanish].
J. Ling, Z. Shen, and Q. Huang, Macromolecules 34, 7613 (2001).
P. Dubois, C. Jacobs, R. Jérome, and P.Teyssie, Macromolecules 24, 2226 (1991).
P. Vanhoorne, P. Dubois, R. Jerome, and P. Teyssie, Macromolecules 25, 37 (1992).
ACKNOWLEDGMENTS
This work was supported by the Consejo de Desarrollo Científico, Humanístico, Tecnológico y de las Artes de la Universidad de Los Andes-Mérida-Venezuela.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflict of interest.
Rights and permissions
About this article
Cite this article
Contreras-Ramírez, J.M., Monsalve, M. Ring-Opening Polymerization of 2,2-Dimethyltrimethylene Carbonate Using Samarium Acetate(III) as an Initiator. Polym. Sci. Ser. B 63, 94–102 (2021). https://doi.org/10.1134/S1560090421020044
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1560090421020044