Abstract
This research aims to investigate, with the aid of the Brazilian standard NBR 7190, analysis of variance (ANOVA—5% significance) and the regrouping bootstrap technique, the influence of the provenance regions Bonfim, Mucajaí and Claudia on the physical and mechanical properties (twenty properties and 720 determinations) of Angelim-pedra (Hymenolobium petraeum Ducke.) and to assess the possibility of estimating, via regression models (152 in all), the physical and mechanical properties investigated as a function of apparent density (ρ12) and compressive strength parallel to the grain (fc0). The results indicated equivalence in most of the physical and mechanical properties, evidencing the small influence of the tree harvest regions. From the regression models, some were considered significant by ANOVA (at the 5% level of significance), which implies that variations in ρ12 and fc0 explain variations in the values of the other estimated properties; however, the low precision indicates that it is not feasible to estimate the variables just based on the ρ12 or fc0.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
ABNT (1997) Projeto de estruturas de madeira (Timber structures design) NBR 7190. Associação Brasileira de Normas Técnicas 107
Adamopoulos S, Passialis C (2010) Relationship of toughness and modulus of elasticity in static bending of small clear spruce wood specimens. Eur J Wood Prod 68:109–111. https://doi.org/10.1007/s00107-009-0365-6
Almeida JPB, Aquino VBM, Wolenski ARV et al (2020) Analysis of relations between the moduli of elasticity in compression, tension, and static bending of hardwoods. BioResources 15:3278–3288. https://doi.org/10.15376/biores.15.2.3278-3288
Beech E, Rivers M, Oldfield S, Smith PP (2017) GlobalTreeSearch: the first complete global database of tree species and country distributions. J Sustain Forest 36:454–489. https://doi.org/10.1080/10549811.2017.1310049
Brasil (2019) Brazilian Woods—Angelim-Pedra. In: Ministério do Meio Ambiente - Serviço Florestal Brasileiro (Ministry of Environment—Brazilian Forest Service). http://sistemas.florestal.gov.br/madeirasdobrasil/features.php?ID=127&caracteristica=19 Accessed on 13 Oct 2019
Cavalheiro RS, Almeida DH, Almeida TH et al (2016) Density as estimator of shrinkage for some Brazilian wood species. Int J Mater Eng 6:107–112. https://doi.org/10.5923/j.ijme.20160603.08
Christoforo AL, Aftimus BHC, Panzera TH et al (2017) Physico-mechanical characterization of the anadenanthera colubrina wood specie. Engenharia Agricola 37:376–384. https://doi.org/10.1590/1809-4430-Eng.Agric.v37n2p376-384/2017
Christoforo AL, de S. Almeida A, Lanini TLS et al (2019) Estimation of the characteristic value of wood strength. Engenharia Agricola 39:127–132. https://doi.org/10.1590/1809-4430-Eng.Agric.v39n1p127-132/2019
Christoforo AL, Couto NG, Almeida JPB et al (2020) Apparent density as an estimator of wood properties obtained in tests where failure is fragile. Engenharia Agrícola 40:105–112. https://doi.org/10.1590/1809-4430-eng.agric.v40n1p105-112/2020
Csordós D, Németh R, Bak M (2014) Variation of colour properties between and within New Robinia varieties with enhanced growing rates from different sites. BioResources 9:7099–7108. https://doi.org/10.15376/biores.9.4.7099-7108
da Costa Cardodo C, Moutinho VHP, de Oliveira Melo L et al (2012) Caracterização físico-mecânica de madeiras amazônicas com aptidão tecnológica para comercialização (Physical and mechanical characterization of Amazon wood with technological potential for marketing). Rev Ciências Agrárias 55:176–183. https://doi.org/10.4322/rca.2012.053
Dadzie PK, Amoah M (2015) Density, some anatomical properties and natural durability of stem and branch wood of two tropical hardwood species for ground applications. Eur J Wood Prod 73:759–773. https://doi.org/10.1007/s00107-015-0925-x
Almeida TH de (2015) Estudo da estabilidade dimensional de madeiras tropicais brasileiras. (Study of Dimensional Stability of Tropical Timber). 103 p. Dissertation. Universidade de São Paulo
de Almeida DH, de Mello Scaliante R, Christoforo AL et al (2014) Tenacidade da madeira como função da densidade aparente (Wooden Toughness as a Function of the Apparent Density). Revista Árvore 38:203–207. https://doi.org/10.1590/S0100-67622014000100020
de Jesus Albuquerque Nogueira MC, de Almeida DH, de Araujo VA et al (2019) Physical and mechanical properties of Eucalyptus saligna wood for timber structures. Ambiente Construído 19:233–239. https://doi.org/10.1590/s1678-86212019000200319
Dias FM, Lahr FAR (2004) Estimativa de propriedades de resistência e rigidez da madeira através da densidade aparente. (Strength and stiffness properties of wood estimated through the specific gravity). Scientia Forestalis 102–113
EN (2008) Eurocode 5: design of timber structures—part 1–1: general—common rules and rules for buildings. Belgium, Brussels
Ferreira GC, Hopkins MJG, de Secco R, S, (2005) Contribuição ao conhecimento morfológico das espécies de leguminosae comercializadas no estado do Pará, como “angelim.” (Contribution to the morphologic knowledge of the species of leguminosae in the state of Pará, traded as “angelim”). Acta Amazonica 34:219–232. https://doi.org/10.1590/s0044-59672004000200010
Galvão APM, Jankowsky IP (1985) Secagem racional da madeira. (Wood rational drying) Nobel, São Paulo, p 108p
Huda AASM, Koubaa A, Cloutier A et al (2014) Variation of the physical and mechanical properties of hybrid poplar clones. BioResources 9:1456–1471. https://doi.org/10.15376/biores.9.1.1456-1471
Hurmekoski E, Jonsson R, Nord T (2015) Context, drivers, and future potential for wood-frame multi-story construction in Europe. Technol Forecast Soc Chang 99:181–196. https://doi.org/10.1016/j.techfore.2015.07.002
IPT (2019) Informações sobre Madeiras. (Information about woods) http://www.ipt.br/informacoes_madeiras/8.htm. Accessed on 21 Feb. 2021
Komariah RN, Hadi YS, Massijaya MY, Suryana J (2015) Physical-mechanical properties of glued laminated timber made from tropical small-diameter logs grown in Indonesia. J Korean Wood Sci Technol 43:156–167. https://doi.org/10.5658/WOOD.2015.43.2.156
Lahr FAR, Christoforo AL, Silva CEGD et al (2016) Evaluation of physical and mechanical properties of Jatobá (Hymenaea stilbocarpa Hayne) wood with different levels of moisture content and different regions of extracions. Revista Arvore 40:147–154. https://doi.org/10.1590/0100-67622016000100016
Logsdon NB (2003) Dimensional stability: estimates starting from the basic density. Madeira Arquitetura Engenharia 4:1–23
Logsdon NB, De Jesus JMH, Penna JE (2010) Avaliação dos Estimadores da Resistência Característica à Compressão Paralela às Fibras (evaluation of the estimators of the characteristic strength in compression parallel to the grain). Scientia Forestalis 38:579–587
Lorenzi H (1998) Árvores Brasileiras: manual de identificação de plantas arbóreas nativas do Brasil (Brazilian trees: manual of identification of native Brazilian tree plants), 2nd edn. Plantarum, Nova Odessa
Machado JS, Louzada JL, Santos AJA et al (2014) Variation of wood density and mechanical properties of blackwood (Acacia melanoxylon R. Br.). Mater Des 56:975–980. https://doi.org/10.1016/j.matdes.2013.12.016
Montgomery DC (2012) Design and analysis of experiments, 9th edn. Wiley, New York, p 752
Morales-Condea MJ, Rodríguez-Liñán C, Saporiti-Machado J (2014) Predicting the density of structural timber members in service. The combine use of wood cores and drill resistance data. Materiales de Construcción 64:e029. https://doi.org/10.3989/mc.2014.03113
Morando TC, Christoforo AL, de Aquino VBM et al (2019) Characterization of the wood species Qualea albiflora for structural purposes. Wood Res 64:769–776
Ramage M, Foster R, Smith S et al (2017) Super Tall Timber: design research for the next generation of natural structure. J Arch 22:104–122. https://doi.org/10.1080/13602365.2016.1276094
Romagnoli M, Cavalli D, Spina S (2014) Wood quality of chestnut: relationship between ring width, specific gravity, and physical and mechanical properties. BioResources 9:1132–1147. https://doi.org/10.15376/biores.9.1.1132-1147
Ruelle J, Beauchêne J, Yamamoto H, Thibaut B (2011) Variations in physical and mechanical properties between tension and opposite wood from three tropical rainforest species. Wood Sci Technol 45:339–357. https://doi.org/10.1007/s00226-010-0323-9
Ruiz-Aquino F, González-Peña MM, Valdez-Hernández JI et al (2018) Mechanical properties of wood of two Mexican oaks: relationship to selected physical properties. Eur J Wood Prod 76:69–77. https://doi.org/10.1007/s00107-017-1168-9
Silva CEG, De Almeida DH, De Almeida TH et al (2018) Influence of the procurement site on physical and mechanical properties of cupiúba wood species. BioResources 13:4118–4131. https://doi.org/10.15376/biores.13.2.4118-4131
Ter SH, Vaessen RW, Cárdenas-López D et al (2016) The discovery of the Amazonian tree flora with an updated checklist of all known tree taxa. Sci Rep 6:1–15. https://doi.org/10.1038/srep29549
ter Steege H, Prado PI, de Lima RAF et al (2020) Biased-corrected richness estimates for the Amazonian tree flora. Sci Rep 10:1–13. https://doi.org/10.1038/s41598-020-66686-3
Varga D, van der Zee ME (2008) Influence of steaming on selected wood properties of four hardwood species. Holz Roh- Werkst 66:11–18. https://doi.org/10.1007/s00107-007-0205-5
Wieruszewski M, Mazela B (2017) Cross Laminated Timber (CLT) as an alternative form of construction wood. Drvna Ind 68:359–367. https://doi.org/10.5552/drind.2017.1728
Wolenski ARV, Peixoto RG, de Moura Aquino VB et al (2020a) Evaluation of mechanical strengths of tropical hardwoods: proposal of probabilistic models. Eur J Wood Prod 78:757–766. https://doi.org/10.1007/s00107-020-01521-0
Wolenski ARV, Peixoto RG, Fedotova V et al (2020b) Shear strength estimation model for tropical wood species. Wood Res 65:175–182
Acknowledgements
The authors thank the Coordenação de Aperfeiçoamento de Nível Superior (CAPES) and the Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) for all the provided support.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
On behalf of all authors, the corresponding author states that there is no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Teixeira, J.N., Wolenski, A.R.V., Aquino, V.B.d. et al. Influence of provenance on physical and mechanical properties of Angelim-pedra (Hymenolobium petraeum Ducke.) wood species. Eur. J. Wood Prod. 79, 1241–1251 (2021). https://doi.org/10.1007/s00107-021-01692-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-021-01692-4