Abstract
The performance of the blast furnace is strongly affected by the position and thickness of the cohesive zone, which is largely influenced by the high-temperature properties of the iron-bearing materials. During its reduction, softening and melting, ferrous materials undergo major microstructure changes and its understanding is essential to develop new raw-materials, technologies, and models. In this study, the behavior of reduction, softening and melting of a lump ore, an acid pellet, and a sinter was characterized by softening and melting (S&M) experiments. After that, to access the samples’ structural transformations, interrupted S&M tests were carried out up to four different conditions based on contraction and pressure loss levels. The obtained products were characterized according to its density (true and apparent), porosity (open, closed and total), phase composition by X-ray diffraction and microstructure (reflected light microscopy and electron scanning microscopy). From the S&M test results, three main regions of reduction were characterized, namely: solid/gas reduction, reduction retardation, and melting reduction. In the solid/gas reduction, samples open porosity increased, with reduction following the shrinking core model. On the region of reduction retardation, a sharp decrease in open porosity was identified together with the diminishing of the reduction rate, which occurred due to the iron shell porosity being clogged due to the slag transfer from the particles’ cores to its periphery. At the melting exudation region, reduction retardation ceased and exudation of the ferrous slag lead to a peak of reduction. The lower the reduction degree of the samples at this stage, the higher the consumption of carbon. Furthermore, at 10 pct contraction, a pseudo-globular wüstite structure interspersed with slag was observed for the pellet and sinter cores. At 50 pct contraction, the previous structure coalesced to form a globular shape wüstite in a well-connected slag matrix.
Similar content being viewed by others
References
P.F. Nogueira and R.J. Fruehan: Metall. Trans. B, 2004, vol. 35, pp. 829-838.
M. Hayashi, K. Suzuki, Y. Maeda and T. Watanabe: ISIJ Int, 2015, vol. 55, pp. 1223-1231.
T. Li, C. Sun, X. Liu, S. Song and Q. Wang: Ironmag. Steelmak., 2017, vol. 45, pp. 755-763.
C.E. Loo, L. T. Matthews and D.P. O’dea: ISIJ Int, 2011, vol. 51, n. 6, pp. 930–38.
A.K. Biswas: Principles of blast furnace iron making – theory and practice. Brisbane: Cootha Publishing House, 1981.
J. Sterneland and A.K. Lahiri: Ironmag. Steelmak., 1999, vol. 26, pp. 339-48.
V.J. Ritz, H.A. Kortmann: in Ironmaking Conference Proceedings, 1998, pp. 1635–54.
T. Bakker and R.H. Heerema: Ironmaking Conf. Proc., 1998, pp. 1597–1608.
G. Clixby: Commission of the European Communities, 1987.
P. Kaushik, R.J. Fruehan: Ironmaking Steelmaking, 2006, vol. 33, pp. 507-519.
J. Small, A. Adema, K. Andreev and E. Zinngrebe: Metals, 2018, vol. 8, pp. 1-14.
K. Higuchi, M. Naito, M. Nakano and Y. Takamoto. ISIJ Int., 2004, vol. 44, n. 12, pp. 2057-66.
A-H. A. El-Geassy, M.I. Nasr, A.A. Omar, E-S.A. Mousa. ISIJ Int., 2008, vol. 48, no. 10, pp. 1359-1367.
I. Shigaki, S. Shirouchi, K. Tokutake and N. Hasegawa: ISIJ Int, 1990, vol. 30, pp. 199-207.
M.M. Hessien, Y. Kashiwaya, K. Ishii, M.I. Nasr and A.A. El-Geassy: Ironmag. Steelmak., 2008, vol. 35, n. 3, pp. 183-90.
I.V. Flores, A.L. Silva, N.C. Heck, M.C. Bagatini: Metall. Mater. Trans. B. 2019.
T. Nishimura, K. Higuchi, M. Naito and K. Kunitomo: ISIJ Int, 2011, vol. 51, pp. 1316-1321.
J. Sterneland: Doctoral thesis, Royal Institute of Technology, Sweden, 2002, p. 233.
S. Jursova, P. Pustejovska, S. Brozova: Alexandria Eng. J., 2018, vol. 57, pp. 1657-1664.
R.C. Gupta: Theory and Laboratory Experiments in Ferrous Metallurgy. Delphi, PHI Learning Private Limited, 2015.
X. Liu, T. Honeyands, G. Evans, P. Zulli and D. O’Dea: Ironmak. Steelmak., 2018.
M. Iljana, A. Kemppainen, T. Paananen, O. Mattila, E. Pisilä, M. Kandrokov and T. Fabritius: Int. J. Miner. Process., 2015, vol. 141, pp. 34-43.
L-H. Hsieh and K-C. L: Ironmaking Conference Proceedings, 1998, pp. 1623–32.
B. Nandy, S. Chandra, D. Bhattacharjee and D. Ghosh: Ironmaking Steelmaking, 2006, vol. 33, n. 2, pp. 111-19.
J. Liu, G. Cheng, Z. Liu, M. Chu and X. Xue: International Journal of Mineral Processing, 2015, v. 142, pp. 113-118.
Z-G Liu, M-S Chu, H-T Wang, W. Zhao and X-X. Xue: Int. J. Miner. Metall. Mater. 2016, vol. 23, no. 1, pp. 25-32.
X-W. An, J-S. Wang, R-Z, Lan, Y-H. Han and Q-G Xue: Journal of Iron and Steel Research, International. 2013, v. 20, n. 5, pp. 11-16.
W. T. Guo, Q. G. Xue, Y. L. Liu, X. F. She and J. S. Wang.: Ironmak. Steelmak. 2016, vol. 43, no. 1, pp. 22-30.
H. Hotta and Y. Yamaoka: ISIJ Transac., 1985, vol. 25, pp. 294-301.
M. Guha, M. Sinha: ISIJ Int, 2015, vol. 55, n. 9, pp. 2033-2035.
M. Iljana, A. Kemppainen, T. Paananen, O. Mattila, E-P. Heikkinen and T. Fabritius: ISIJ Int, 2016, vol. 56, n. 10, pp. 1705-1714.
N.J. Busby, T.A.T. Fray and D.C. Goldring: Ironmak. Steelmak., 1994, vol. 21, pp. 229-36.
M. Geerdes and R. Chaigneau: International Congress on Science and Technology of Ironmaking. How iron ore melts in a blast furnace—Part 1. 2018, vol. 8.
M. Geerdes and R. Chaigneau: International Congress on Science and Technology of Ironmaking. How iron ore melts in a blast furnace—Part 2. 2018, vol. 8,
L.V. Bogdandy, H.-J. Engell: The reduction of iron ores: scientific basis and technology. Springer Science & Business media, Berlin, DE, 2013.
Kemppainen, K. Ohno, M. Iljana, O. Mattila, T. Paananen, E. Heikkinen, T. Maeda, K. Kunitomo and T. Fabritius: ISIJ Int, 2015, vol. 55, pp. 2039-2046.
K. Inoue, T. Ikeda and T. Uenaka: Tetsu-to-Hagané, 1982, vol.68, pp. 2431-2440
Acknowledgments
The authors express gratitude to CAPES-PROEX, CNPq, and FAPEMIG for stimulating and supporting research.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Manuscript submitted October 10, 2019; received February 28, 2021.
Rights and permissions
About this article
Cite this article
Vemdrame Flores, I., Matos, O., Lima da Silva, A. et al. Microstructure and Porosity Evolution During the Reduction, Softening and Melting of Iron-Bearing Materials. Metall Mater Trans B 52, 1716–1738 (2021). https://doi.org/10.1007/s11663-021-02140-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11663-021-02140-7