Skip to main content

Advertisement

Log in

Direct Parallel and Hybrid Power Control Scheme of a Low-Power PV and Piezoelectric Energy Harvesting Module

  • Original Article
  • Published:
Journal of Electrical Engineering & Technology Aims and scope Submit manuscript

A Correction to this article was published on 26 May 2021

This article has been updated

Abstract

This paper presents a novel direct parallel power control scheme with independent current paths for the proposed hybrid energy-harvesting system that consists of a low-power photovoltaic panel, a piezoelectric harvesting module, and an energy storage system. A battery is connected to store the generated power from the two renewable power sources to provide a continuous power supply for the users. The designed power converter controls both battery state and power supply without any power conditioning system. To achieve this, a low-power DC–DC converter with battery charging function and control algorithm is designed for the hybrid power source. Therefore, in the proposed system, no additional battery charge controller is required. To control the battery, however, an additional current sensor to detect the battery power is simply added to each DC–DC converter. In the proposed power control scheme and controller, each power input, output, and the combined power flow are connected with neither communication protocols nor additional controller. Moreover, the converters can adjust the supplied power for parallel power-sharing. For maximum output current protection in each converter and constant current control for the battery, a hybrid power connection and its related current path are also proposed in this paper. The effectiveness of the proposed hybrid power system and the direct parallel power control scheme was verified through experiments.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14

Similar content being viewed by others

Change history

References

  1. Mai T, Hand MM, Baldwin SF, Wiser RH, Brinkman GL, Denholm P, Arent DJ, Porro G, Sandor D, Hostick DJ, Milligan M, DeMeo EA, Bazilian M (2014) Renewable electricity futures for the United States. IEEE Trans Sustain Energy 5(2):372–378

    Article  Google Scholar 

  2. Moreira A, Pozo D, Street A, Sauma E (2017) Reliable renewable generation and transmission expansion planning: co-optimizing system’s resources for meeting renewable targets. IEEE Trans Power Syst 32(4):3246–3257

    Article  Google Scholar 

  3. Kumar S, Saket RK, Dheer DK, Holm-Nielsen JB, Sanjeevikumar P (2020) reliability enhancement of electrical power system including impacts of renewable energy sources: a comprehensive review. IET Gener Transm Distrib 14(10):1799–1815

    Article  Google Scholar 

  4. Ssekulima EB, Anwar MB, Hinai AA, ElMoursi MS (2016) Wind speed and solar irradiance forecasting techniques for enhanced renewable energy integration with the grid: a review. IET Renew Power Gener 10(7):885–989

    Article  Google Scholar 

  5. Nehrir MH, Wang C, Strunz K, Aki H, Ramakumar R, Bing J, Miao Z, Salameh Z (2011) A review of hybrid renewable/alternative energy systems for electric power generation: configurations, control, and applications. IEEE Trans Sustain Energy 2(4):392–403

    Article  Google Scholar 

  6. Wang T, Nian H, Zhu ZQ (2018) Using inverter-based renewable generators to improve the grid power quality—a review. Chin J Electr Eng 4(4):16–25

    Article  Google Scholar 

  7. Li J, Wu Z, Zhou S, Fu H, Zhang XP (2015) Aggregator service for PV and battery energy storage systems of residential building. CSEE J Power Energy Syst 1(4):3–11

    Article  Google Scholar 

  8. Acciari G, Busacca A, Guarino S, Imburgia A, Madonia A, Miceli R, Parisi A, Sanseverino ER, Romano P, Sauba G, Schettino G, Spataro C, Viola F (2016) PV systems in the vertical walls: a comparison of innovative structures. In: IEEE international conference on renewable energy research and applications (ICRERA-2016), vol 1, pp 1–6

  9. Zhu M, Worthington E, Tiwari A (2010) Design study of piezoelectric energy-harvesting devices for generation of higher electrical power using a coupled piezoelectric-circuit finite element method. IEEE Trans Ultrasonics Ferroelectr Freq Control 57(2):427–437

    Article  Google Scholar 

  10. Keawboonchuay C, Engel TG (2003) Electrical power generation characteristics of piezoelectric generator under quasi-static and dynamic stress conditions. IEEE Trans Ultrasonics Ferroelectr Freq Control 50(10):1377–1382

    Article  Google Scholar 

  11. Le TT, Han J, Jouanne AV, Mayaram K, Fiez TS (2006) Piezoelectric micro-power generation interface circuits. IEEE J Solid State Circuits 41(6):1411–1420

    Article  Google Scholar 

  12. Zhao H, Ling J, Yu J (2012) A comparative analysis of piezoelectric transducers for harvesting energy from asphalt pavement. J Ceram Soc Jpn 120(8):317–323

    Article  Google Scholar 

  13. Long SX, Khoo SY, Ong ZC, Soong MF (2019) Finite element analysis of a dual-layer substrate sandwiched bridge piezoelectric transducer for harvesting energy from asphalt pavement. IEEE Int Conf Sens Nanotechnol 1:1–6

    Google Scholar 

  14. Huo YS, Wu X, Wei D, Xue H, Wang YP, Teng YP (2014) Research on propagation characteristics of guide wave in rail excited by low-frequency piezoelectric transducer. In: Proceedings of the 2014 symposium on piezoelectricity, acoustic waves, and devices applications, pp 457–460

  15. California Energy Commission Final Project Report, January, 2014. http://www.genziko.com

  16. Badawy MO, Yilmaz AS, Sozer Y, Husain I (2014) Parallel power processing topology for solar PV applications. IEEE Trans Ind Appl 50(2):1245–1255

    Article  Google Scholar 

  17. Sha D, Zhang J, Wang X, Yuan W (2017) Dynamic response improvements of parallel-connected bidirectional DC–DC converters for electrical drive powered by low-voltage battery employing optimized feedforward control. IEEE Trans Power Electron 32(10):7783–7794

    Article  Google Scholar 

  18. Hu B, Sathiakumar S (2011) Current ripple cancellation of multiple paralleled boost converters for PV/battery charging system with MPPT. In 2011 IEEE PES innovative smart grid technologies, pp 1–6. https://doi.org/10.1109/ISGT-Asia.2011.6167080

  19. Wang H, Zhang D (2010) The stand-alone PV generation system with parallel battery charger. Int Conf Electr Control Eng 2010:4450–4453. https://doi.org/10.1109/iCECE.2010.1083

    Article  Google Scholar 

  20. Mahmood H, Michaelson D, Jiang J (2014) A power management strategy for PV/battery hybrid systems in islanded microgrids. IEEE J Emerging Sel Top Power Electron 2(4):870–882

    Article  Google Scholar 

Download references

Acknowledgements

This research was supported by Kyungsung University Research Grants in 2020 and supported by the Technology development Program(S2797013) funded by the Ministry of SMEs and Startups(MSS, Korea).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Dong-Hee Lee.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Lee, DH. Direct Parallel and Hybrid Power Control Scheme of a Low-Power PV and Piezoelectric Energy Harvesting Module. J. Electr. Eng. Technol. 16, 2045–2053 (2021). https://doi.org/10.1007/s42835-021-00722-8

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s42835-021-00722-8

Keywords

Navigation