Skip to content
Licensed Unlicensed Requires Authentication Published by De Gruyter February 8, 2021

CFD-DEM simulation of powders clogging in a packed bed with lateral inlet

  • Yingchao Liu , Jingbin Wang , Yanjun Liu , Lihong Li , Heng Zhou and Xuefeng She EMAIL logo

Abstract

Clogging behavior of powder particles in packed bed is a longstanding engineering challenge in many industrial processes, of particular interests to ironmaking reactors. In this work, a CFD-DEM model was developed to investigate the powders clogging in a packed bed with lateral inlet. The flow and clogging of powders of varying gas velocities flowing through the packed bed were studied. The results showed that two kinds of clogging powders inside the porous can be observed. One is mainly due to mechanical interactions between powder particles, which can create arches on packed bed and stop the flow. When the powders form a bridge across the pore throat of the orifice, the bottleneck of void space becomes the starting point for blockage formation. The other represents a part of clogging powders which is due to drag force and friction between one small particle rolling very slowly on the surface of large particles whose spacing is close to the diameter of powders. The powders distribution, mechanical behavior and pressure drop were also discussed. The findings of this work provides a fundamental understanding on clogging behavior of powders in a packed bed with lateral inlet, and is useful for industry processes’ understanding and optimization.


Corresponding author: Xuefeng She, State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing100083, China, E-mail:

Award Identifier / Grant number: 51874029

  1. Author contributions: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.

  2. Research funding: This research was supported by the National Natural Science Foundation of China (Grant Number: 51874029).

  3. Conflict of interest statement: The authors declare no conflicts of interest regarding this article.

References

Abhale, P. B., N. N. Viswanathan, and H. Saxén. 2020. “Numerical Modelling of Blast Furnace–Evolution and Recent Trends.” Mineral Processing and Extractive Metallurgy 129 (2): 166–83. https://doi.org/10.1080/25726641.2020.1733357.Search in Google Scholar

Chen, J., T. Akiyama, H. Nogami, and J. I. Yagi. 1994. “Behavior of Powders in a Packed Bed with Lateral Inlets.” ISIJ International 34 (2): 133–9. https://doi.org/10.2355/isijinternational.34.133.Search in Google Scholar

Civan, F. 2007. Reservoir Formation Damage-Fundamentals, Modeling, Assessment, and Mitigation. Houston: Gulf Professional Pub.10.1016/B978-075067738-7/50002-6Search in Google Scholar

Cundall, P. A., and O. D. Strack. 1979. “A Discrete Numerical Model for Granular Assemblies.” Geotechnique 29 (1): 47–65. https://doi.org/10.1680/geot.1979.29.1.47.Search in Google Scholar

Dong, X. F., D. Pinson, S. J. Zhang, A. B. Yu, and P. Zulli. 2004. “Gas–Powder Flow and Powder Accumulation in a Packed Bed: I. Experimental Study.” Powder Technology 149 (1): 1–9. https://doi.org/10.1016/j.powtec.2004.09.040.Search in Google Scholar

Fukuda, M., J. Suzuki, H. Kawai, and H. Nogami. 2015. “Numerical Analysis on Passage and Blockage Behaviors of Fine Particles Through an Orifice Consists of Coarse Particles.” ISIJ International 55 (6): 1291–8. https://doi.org/10.2355/isijinternational.55.1291.Search in Google Scholar

Hidaka, N., J. Iyama, T. Matsumoto, K. Kusakabe, and S. Morooka. 1998. “Entrainment of Fine Particles with Upward Gas Flow in a Packed Bed of Coarse Particles.” Powder Technology 95 (3): 265–71. https://doi.org/10.1016/s0032-5910(97)03357-3.Search in Google Scholar

Kikuchi, S., T. Kon, S. Ueda, S. Natsui, R. Inoue, and T. Ariyama. 2015. “Analysis of Powder Motion in a Packed Bed of Blast Furnace Using the Discrete Element Method.” ISIJ International 55 (6): 1313–20. https://doi.org/10.2355/isijinternational.55.1313.Search in Google Scholar

Ku, X., T. Li, and T. Løvås. 2013. “Influence of Drag Force Correlations on Periodic Fluidization Behavior in Eulerian-Lagrangian Simulation of a Bubbling Fluidized Bed.” Chemical Engineering Science 95: 94–106. https://doi.org/10.1016/j.ces.2013.03.038.Search in Google Scholar

Kuang, S., K. Li, S. Shrestha, and A. Yu. 2020. “Discrete Particle Simulation of Heterogeneous Gas-Solid Flows in Riser and Downer Reactors.” Powder Technology 375: 221–32. https://doi.org/10.1016/j.powtec.2020.07.080.Search in Google Scholar

Kuang, S., Z. Li, and A. Yu. 2018. “Review on Modeling and Simulation of Blast Furnace.” Steel Research International 89 (1): 1700071. https://doi.org/10.1002/srin.201700071.Search in Google Scholar

Kuang, S., M. Zhou, and A. Yu. 2020. “CFD-DEM Modelling and Simulation of Pneumatic Conveying: A Review.” Powder Technology 365: 186–207. https://doi.org/10.1016/j.powtec.2019.02.011.Search in Google Scholar

Luo, Z. G., H. Zhou, T. Zhang, Y. You, L. J. Zhang, Z. S. Zou, and Y. S. Shen. 2017. “DEM Study of Blockage Behaviour of Cohesive Fine Particles in a Packed Structure of Large Particles.” Powder Technology 314: 102–9. https://doi.org/10.1016/j.powtec.2016.08.053.Search in Google Scholar

Natsui, S., S. Ueda, H. Nogami, J. Kano, R. Inoue, and T. Ariyama. 2012. “Gas–Solid Flow Simulation of Fines Clogging a Packed Bed Using DEM-CFD.” Chemical Engineering Science 71: 274–82. https://doi.org/10.1016/j.ces.2011.12.035.Search in Google Scholar

Qian, F., N. Huang, X. Zhu, and J. Lu. 2013. “Numerical Study of the Gas–Solid Flow Characteristic of Fibrous Media Based on SEM Using CFD-DEM.” Powder Technology 249: 63–70. https://doi.org/10.1016/j.powtec.2013.07.030.Search in Google Scholar

Remond, S. 2010. “DEM Simulation of Small Particles Clogging in the Packing of Large Beads.” Physica A: Statistical Mechanics and its Applications 389 (21): 4485–96. https://doi.org/10.1016/j.physa.2010.06.033.Search in Google Scholar

Shen, Y., B. Guo, A. Yu, D. Maldonado, P. Austin, and P. Zulli. 2008. “Three-Dimensional Modelling of Coal Combustion in Blast Furnace.” ISIJ International 48 (6): 777–86. https://doi.org/10.2355/isijinternational.48.777.Search in Google Scholar

Shi, L., Q. Q. Wang, S. L. Xu, X. D. Pan, H. L. Sun, and Y. Q. Cai. 2018. “Numerical Study on Clogging of Prefabricated Vertical Drain in Slurry Under Vacuum Loading.” Granular Matter 20 (4): 74. https://doi.org/10.1007/s10035-018-0846-6.Search in Google Scholar

Shibata, K., M. Shimizu, S. I. Inaba, R. Takahashi, and J. I. Yagi. 1991. “Pressure Loss and Hold-Up Powders for Gas-Powder Two Phase Flow in Packed Beds.” ISIJ International 31 (5): 434–9. https://doi.org/10.2355/isijinternational.31.434.Search in Google Scholar

Takahashi, H., H. Kawai, T. Kondo, and M. Sugawara. 2011. “Permeation and Blockage of Fine Particles Transported by Updraft Through a Packed Bed.” ISIJ International 51 (10): 1608–16. https://doi.org/10.2355/isijinternational.51.1608.Search in Google Scholar

Yamaoka, H. 1991. “Mechanisms of Hanging Caused by Dust in a Shaft Furnace.” ISIJ International 31 (9): 939–46. https://doi.org/10.2355/isijinternational.31.939.Search in Google Scholar

Yang, W. J., Z. Y. Zhou, and A. B. Yu. 2015. “Discrete Particle Simulation of Solid Flow in a Three-Dimensional Blast Furnace Sector Model.” Chemical Engineering Journal 278: 339–52. https://doi.org/10.1016/j.cej.2014.11.144.Search in Google Scholar

Zhou, H., S. Wang, B. Du, M. Kou, Z. Tang, J. Yang, S. Wu, and E. Dianyu. 2020. Influence of Center Gas Supply Device on Gas–Solid Flow in COREX Shaft Furnace Through DEM-CFD Model. International Journal of Chemical Reactor Engineering 18 (5–6): 20200012. https://doi.org/10.1515/ijcre-2020-0012.Search in Google Scholar

Zhou, H., S. Wu, M. Kou, Y. You, Z. Luo, B. Tang, H. Cheng, X. Li, and Z. Zou. 2019. “Experimental Study and Numerical Simulation of Dust Accumulation in Bustle Pipe of COREX Shaft Furnace with Areal Gas Distribution Beams.” Ironmaking & Steelmaking 46 (10): 980–6. https://doi.org/10.1080/03019233.2018.1470361.Search in Google Scholar

Zhou, H., S. Wu, M. Kou, Z. G. Luo, Z. S. Zou, and Y. Shen. 2018. “Analysis of Cohesive Particle Percolation in a Packed Bed Using Discrete Element Method.” ISIJ International 58 (1): 43–51. https://doi.org/10.2355/isijinternational.isijint-2017-373.Search in Google Scholar

Zhou, Z. Y., H. P. Zhu, A. B. Yu, B. Wright, and P. Zulli. 2008. “Discrete Particle Simulation of Gas–Solid Flow in a Blast Furnace.” Computers & Chemical Engineering 32 (8): 1760–72. https://doi.org/10.1016/j.compchemeng.2007.08.018.Search in Google Scholar

Zhu, H. P., Z. Y. Zhou, R. Y. Yang, and A. B. Yu. 2007. “Discrete Particle Simulation of Particulate Systems: Theoretical Developments.” Chemical Engineering Science 62 (13): 3378–96. https://doi.org/10.1016/j.ces.2006.12.089.Search in Google Scholar

Zhu, H. P., Z. Y. Zhou, R. Y. Yang, and A. B. Yu. 2008. “Discrete Particle Simulation of Particulate Systems: A Review of Major Applications and Findings.” Chemical Engineering Science 63 (23): 5728–70. https://doi.org/10.1016/j.ces.2008.08.006.Search in Google Scholar

Received: 2020-10-27
Accepted: 2020-12-26
Published Online: 2021-02-08

© 2021 Walter de Gruyter GmbH, Berlin/Boston

Downloaded on 28.3.2024 from https://www.degruyter.com/document/doi/10.1515/ijcre-2020-0215/html
Scroll to top button