Skip to main content
SpringerLink
Log in

Postbuckling of multilayer cylindrical and spherical shell panels reinforced with graphene platelet by isogeometric analysis

  • Original Article
  • Published:
Engineering with Computers Aims and scope Submit manuscript

Abstract

The present work fills a gap on the postbuckling behavior of multilayer functionally graded graphene platelet reinforced composite (FG-GPLRC) cylindrical and spherical shell panels resting on elastic foundations subjected to central pinching forces and pressure loadings. Based on a higher-order shear deformation theory and the von Kármán’s nonlinear strain–displacement relations, the governing equations of the FG-GPLRC cylindrical and spherical shell panels are established by the principle of virtual work. The non-uniform rational B-spline (NURBS) based isogeometric analysis (IGA), the modified arc-length method and the Newton’s iteration method are employed synthetically to obtain nonlinear load–deflection curves for the panels numerically. Several comparative examples are performed to test reliability and accuracy of IGA and arc-length method in present formulation and programming implementation. Parametric investigations are carried out to illustrate the effects of dispersion type of the graphene platelet (GPL), weight fraction of the GPL, thickness of the panel, radius of the panel and parameters of elastic foundation on the load–deflection curves of the FG-GPLRC shell panels. Some complex load–deflection curves of the FG-GPLRC cylindrical and spherical shell panels resting on elastic foundations may be useful for future references.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21

Similar content being viewed by others

References

  1. Huang X, Qi X, Boey FYC, Zhang H (2012) Graphene-based composites. Chem Soc Rev 41:666–686

    Google Scholar 

  2. King JA, Klimek DR, Miskioglu I, Odegard GM (2013) Mechanical properties of graphene nanoplatelet/epoxy composites. J Appl Polym Sci 128:4217–4223

    Google Scholar 

  3. Wang Y, Yu J, Dai W, Song Y, Wang D, Zeng L, Jiang N (2015) Enhanced thermal and electrical properties of epoxy composites reinforced with graphene nanoplatelets. Polym Compos 36:556–565

    Google Scholar 

  4. Bartolucci SF, Paras J, Rafiee MA, Rafiee J, Lee SL, Kapoor D, Koratkar N (2011) Graphene–aluminum nanocomposites. Mater Sci Eng A Struct Mater Prop Microstruct Process 528:7933–7937

    Google Scholar 

  5. Rashad M, Pan F, Tang A, Asif M (2014) Effect of graphene nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder method. Prog Nat Sci Mater Int 24:101–108

    Google Scholar 

  6. Kim WJ, Lee TJ, Han S (2014) Multi-layer graphene/copper composites: preparation using high-ratio differential speed rolling, microstructure and mechanical properties. Carbon 69:55–65

    Google Scholar 

  7. Tjong SC (2013) Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets. Mater Sci Eng R Rep 74:281–350

    Google Scholar 

  8. Reddy JN (2003) Mechanics of laminated composite plates and shells: theory and analysis. CRC Press

    Google Scholar 

  9. Ferreira AJM (2005) Analysis of composite plates using a layerwise theory and multiquadrics discretization. Mech Adv Mater Struct 12:99–112

    Google Scholar 

  10. Thai CH, Ferreira AJM, Bordas S, Rabczuk T, Nguyenxuan H (2014) Isogeometric analysis of laminated composite and sandwich plates using a new inverse trigonometric shear deformation theory. Eur J Mech A Solids 43:89–108

    MATH  Google Scholar 

  11. Tao C, Fu Y (2017) Thermal buckling and postbuckling analysis of size-dependent composite laminated microbeams based on a new modified couple stress theory. Acta Mech 228:1711–1724

    MathSciNet  MATH  Google Scholar 

  12. Ouyang T, Bao R, Sun W, Guan Z, Tan R (2020) A fast and efficient numerical prediction of compression after impact (CAI) strength of composite laminates and structures. Thin Walled Struct 148:106588

    Google Scholar 

  13. Sinmazcelik T, Avcu E, Bora MO, Coban O (2011) A review: Fibre metal laminates, background, bonding types and applied test methods. Mater Des 32:3671–3685

    Google Scholar 

  14. Fu Y, Tao C (2016) Nonlinear dynamic responses of viscoelastic fiber-metal- laminated beams under the thermal shock. J Eng Math 98:113–128

    MathSciNet  MATH  Google Scholar 

  15. Tao C, Fu Y, Dai H (2016) Nonlinear dynamic analysis of fiber metal laminated beams subjected to moving loads in thermal environment. Compos Struct 140:410–416

    Google Scholar 

  16. Tao C, Fu Y, Dai T (2017) Dynamic analysis for cracked fiber-metal laminated beams carrying moving loads and its application for wavelet based crack detection. Compos Struct 159:463–470

    Google Scholar 

  17. Tao C, Dai T (2021) Large amplitude free vibration of porous skew and elliptical nanoplates based on nonlocal elasticity by isogeometric analysis. Mech Adv Mater Struct. https://doi.org/10.1080/15376494.2021.1873467

    Article  Google Scholar 

  18. Tounsi A, Houari MSA, Benyoucef S, Bedia EAA (2013) A refined trigonometric shear deformation theory for thermoelastic bending of functionally graded sandwich plates. Aerosp Sci Technol 24:209–220

    Google Scholar 

  19. Dorduncu M (2020) Stress analysis of sandwich plates with functionally graded cores using peridynamic differential operator and refined zigzag theory. Thin Walled Struct 146:106468

    Google Scholar 

  20. Phung-Van P, Ferreira A, Thai CH (2020) Computational optimization for porosity-dependent isogeometric analysis of functionally graded sandwich nanoplates. Compos Struct 239:112029

    Google Scholar 

  21. Zhu C, Fang X, Liu J, Nie G, Zhang C (2020) An analytical solution for nonlinear vibration control of sandwich shallow doubly-curved nanoshells with functionally graded piezoelectric nanocomposite sensors and actuators. Mech Based Des Struct Mach. https://doi.org/10.1080/15397734.2020.1779742

    Article  Google Scholar 

  22. Phungvan P, Thai CH, Abdelwahab M, Nguyenxuan H (2020) Optimal design of FG sandwich nanoplates using size-dependent isogeometric analysis. Mech Mater 142:103277

    Google Scholar 

  23. Thai CH, Ferreira A, Phung-Van P (2020) A nonlocal strain gradient isogeometric model for free vibration and bending analyses of functionally graded plates. Compos Struct 251:112634

    Google Scholar 

  24. Thai CH, Ferreira A, Phung-Van P (2020) Free vibration analysis of functionally graded anisotropic microplates using modified strain gradient theory. Eng Anal Bound Elem 117:284–298

    MathSciNet  MATH  Google Scholar 

  25. Tao C, Dai T (2021) Analyses of thermal buckling and secondary instability of post-buckled S-FGM plates with porosities based on a meshfree method. Appl Math Model 89:268–284

    MathSciNet  MATH  Google Scholar 

  26. Thai CH, Tran T, Phung-Van P (2020) A size-dependent moving Kriging meshfree model for deformation and free vibration analysis of functionally graded carbon nanotube-reinforced composite nanoplates. Eng Anal Bound Elem 115:52–63

    MathSciNet  MATH  Google Scholar 

  27. Thai CH, Ferreira A, Rabczuk T, Nguyen-Xuan H (2018) Size-dependent analysis of FG-CNTRC microplates based on modified strain gradient elasticity theory. Eur J Mech A Solids 72:521–538

    MathSciNet  MATH  Google Scholar 

  28. Thai CH, Ferreira A, Rabczuk T, Nguyen-Xuan H (2018) A naturally stabilized nodal integration meshfree formulation for carbon nanotube-reinforced composite plate analysis. Eng Anal Bound Elem 92:136–155

    MathSciNet  MATH  Google Scholar 

  29. Zhao S, Zhao Z, Yang Z, Ke L, Kitipornchai S, Yang J (2020) Functionally graded graphene reinforced composite structures: a review. Eng Struct 210:110339

    Google Scholar 

  30. Song M, Kitipornchai S, Yang J (2017) Free and forced vibrations of functionally graded polymer composite plates reinforced with graphene nanoplatelets. Compos Struct 159:579–588

    Google Scholar 

  31. Song M, Yang J, Kitipornchai S, Zhu W (2017) Buckling and postbuckling of biaxially compressed functionally graded multilayer graphene nanoplatelet-reinforced polymer composite plates. Int J Mech Sci 131132:345–355

    Google Scholar 

  32. Guo H, Cao S, Yang T, Chen Y (2018) Vibration of laminated composite quadrilateral plates reinforced with graphene nanoplatelets using the element-free IMLS-Ritz method. Int J Mech Sci 142–143:610–621

    Google Scholar 

  33. Gholami R, Ansari R (2017) Large deflection geometrically nonlinear analysis of functionally graded multilayer graphene platelet-reinforced polymer composite rectangular plates. Compos Struct 180:760–771

    Google Scholar 

  34. Gholami R, Ansari R (2018) Nonlinear harmonically excited vibration of third-order shear deformable functionally graded graphene platelet-reinforced composite rectangular plates. Eng Struct 156:197–209

    Google Scholar 

  35. Gholami R, Ansari R (2019) Nonlinear stability and vibration of pre/post-buckled multilayer FG-GPLRPC rectangular plates. Appl Math Model 65:627–660

    MathSciNet  MATH  Google Scholar 

  36. Li C, Han Q, Wang Z, Wu X (2020) Analysis of wave propagation in functionally graded piezoelectric composite plates reinforced with graphene platelets. Appl Math Model 81:487–505

    MathSciNet  MATH  Google Scholar 

  37. Malekzadeh P, Setoodeh AR, Shojaee M (2018) Vibration of FG-GPLs eccentric annular plates embedded in piezoelectric layers using a transformed differential quadrature method. Comput Methods Appl Mech Eng 340:451–479

    MathSciNet  MATH  Google Scholar 

  38. Xu Z, Huang Q (2019) Vibro-acoustic analysis of functionally graded graphene-reinforced nanocomposite laminated plates under thermal-mechanical loads. Eng Struct 186:345–355

    Google Scholar 

  39. Al-Furjan M, Safarpour H, Habibi M, Safarpour M, Tounsi A (2020) A comprehensive computational approach for nonlinear thermal instability of the electrically FG-GPLRC disk based on GDQ method. Eng Comput. https://doi.org/10.1007/s00366-020-01088-7

    Article  Google Scholar 

  40. Thai CH, Ferreira AJM, Tran TD, Phungvan P (2019) Free vibration, buckling and bending analyses of multilayer functionally graded graphene nanoplatelets reinforced composite plates using the NURBS formulation. Compos Struct 220:749–759

    Google Scholar 

  41. Javani M, Kiani Y, Eslami M (2020) Thermal buckling of FG graphene platelet reinforced composite annular sector plates. Thin Walled Struct 148:106589

    Google Scholar 

  42. Tao C, Dai T (2021) Isogeometric analysis for size-dependent nonlinear free vibration of graphene platelet reinforced laminated annular sector microplates. Eur J Mech A Solids 86:104171

    MathSciNet  MATH  Google Scholar 

  43. Thai CH, Phung-Van P (2020) A meshfree approach using naturally stabilized nodal integration for multilayer FG GPLRC complicated plate structures. Eng Anal Bound Elem 117:346–358

    MathSciNet  MATH  Google Scholar 

  44. Sun J, Ni Y, Gao H, Zhu S, Tong Z, Zhou Z (2020) Torsional buckling of functionally graded multilayer graphene nanoplatelet-reinforced cylindrical shells. Int J Struct Stab Dyn 20:2050005

    MathSciNet  Google Scholar 

  45. Kiani Y (2019) Buckling of functionally graded graphene reinforced conical shells under external pressure in thermal environment. Compos Part B Eng 156:128–137

    Google Scholar 

  46. Heydarpour Y, Malekzadeh P, Gholipour F (2019) Thermoelastic analysis of FG-GPLRC spherical shells under thermo-mechanical loadings based on Lord-Shulman theory. Compos Part B Eng 164:400–424

    Google Scholar 

  47. Heydarpour Y, Malekzadeh P, Dimitri R, Tornabene F (2020) Thermoelastic analysis of rotating multilayer FG-GPLRC truncated conical shells based on a coupled TDQM-NURBS scheme. Compos Struct 235:111707

    Google Scholar 

  48. Niu Y, Zhang W, Guo XY (2019) Free vibration of rotating pretwisted functionally graded composite cylindrical panel reinforced with graphene platelets. Eur J Mech A Solids 77:103798

    MathSciNet  MATH  Google Scholar 

  49. Bidzard A, Malekzadeh P, Mohebpour SR (2019) Vibration of multilayer FG-GPLRC toroidal panels with elastically restrained against rotation edges. Thin Walled Struct 143:106209

    Google Scholar 

  50. Ansari R, Torabi J, Hasrati E (2020) Postbuckling analysis of axially-loaded functionally graded GPL-reinforced composite conical shells. Thin Walled Struct 148:106594

    Google Scholar 

  51. Dong Y, Li Y, Li X, Yang J (2020) Active control of dynamic behaviors of graded graphene reinforced cylindrical shells with piezoelectric actuator/sensor layers. Appl Math Model 82:252–270

    MathSciNet  MATH  Google Scholar 

  52. Dong Y, Li X, Gao K, Li Y, Yang J (2020) Harmonic resonances of graphene-reinforced nonlinear cylindrical shells: effects of spinning motion and thermal environment. Nonlinear Dyn 99:981–1000

    MATH  Google Scholar 

  53. Ebrahimi F, Habibi M, Safarpour H (2019) On modeling of wave propagation in a thermally affected GNP-reinforced imperfect nanocomposite shell. Eng Comput 35:1375–1389

    Google Scholar 

  54. Al-Furjan M, Habibi M, won Jung D D, Chen G, Safarpour M, Safarpour H (2020) Chaotic responses and nonlinear dynamics of the graphene nanoplatelets reinforced doubly-curved panel. Eur J Mech A Solids 85:104091

    MathSciNet  MATH  Google Scholar 

  55. Al-Furjan M, Habibi M, won Jung D, Sadeghi S, Safarpour H, Tounsi A, Chen G, (2020) A computational framework for propagated waves in a sandwich doubly curved nanocomposite panel. Eng Comput. https://doi.org/10.1007/s00366-020-01130-8

    Article  Google Scholar 

  56. Van Do VN, Lee C-H (2020) Static bending and free vibration analysis of multilayered composite cylindrical and spherical panels reinforced with graphene platelets by using isogeometric analysis method. Eng Struct 215:110682

    Google Scholar 

  57. Van Do VN, Lee C-H (2020) Bézier extraction based isogeometric analysis for bending and free vibration behavior of multilayered functionally graded composite cylindrical panels reinforced with graphene platelets. Int J Mech Sci 183:105744

    Google Scholar 

  58. Zamani H (2020) Nonlinear vibration of piezoelectric graphene-reinforced composite laminated panels in thermal environment using Amabili-Reddy shear deformation theory. Compos Struct 250:112556

    Google Scholar 

  59. Safarpour M, Ebrahimi F, Habibi M, Safarpour H (2020) On the nonlinear dynamics of a multi-scale hybrid nanocomposite disk. Eng Comput. https://doi.org/10.1007/s00366-020-00949-5

    Article  Google Scholar 

  60. Al-Furjan M, Oyarhossein MA, Habibi M, Safarpour H, Jung DW (2020) Wave propagation simulation in an electrically open shell reinforced with multi-phase nanocomposites. Eng Comput. https://doi.org/10.1007/s00366-020-01167-9

    Article  Google Scholar 

  61. Huang X-h, Yang J, Wang X-e, Azim I (2020) Combined analytical and numerical approach for auxetic FG-CNTRC plate subjected to a sudden load. Eng Comput. https://doi.org/10.1007/s00366-020-01106-8

    Article  Google Scholar 

  62. Mahesh V, Harursampath D (2020) Nonlinear vibration of functionally graded magneto-electro-elastic higher order plates reinforced by CNTs using FEM. Eng Comput. https://doi.org/10.1007/s00366-020-01098-5

    Article  Google Scholar 

  63. Li Z (2020) Exploration of the encased nanocomposites functionally graded porous arches: nonlinear analysis and stability behavior. Appl Math Model 82:1–16

    MathSciNet  MATH  Google Scholar 

  64. Pourjabari A, Hajilak ZE, Mohammadi A, Habibi M, Safarpour H (2019) Effect of porosity on free and forced vibration characteristics of the GPL reinforcement composite nanostructures. Comput Math Appl 77:2608–2626

    MathSciNet  MATH  Google Scholar 

  65. Ebrahimi F, Hashemabadi D, Habibi M, Safarpour H (2020) Thermal buckling and forced vibration characteristics of a porous GNP reinforced nanocomposite cylindrical shell. Microsyst Technol 26:461–473

    Google Scholar 

  66. Gao Y, Xiao W-s, Zhu H (2020) Snap-buckling of functionally graded multilayer graphene platelet-reinforced composite curved nanobeams with geometrical imperfections. Eur J Mech A Solids 82:103993

    MathSciNet  MATH  Google Scholar 

  67. Arefi M, Bidgoli EM-R, Rabczuk T (2019) Effect of various characteristics of graphene nanoplatelets on thermal buckling behavior of FGRC micro plate based on MCST. Eur J Mech A Solids 77:103802

    MathSciNet  MATH  Google Scholar 

  68. Karami B, Shahsavari D (2020) On the forced resonant vibration analysis of functionally graded polymer composite doubly-curved nanoshells reinforced with graphene-nanoplatelets. Comput Methods Appl Mech Eng 359:112767

    MathSciNet  MATH  Google Scholar 

  69. Li J, Tang F, Habibi M (2020) Bi-directional thermal buckling and resonance frequency characteristics of a GNP-reinforced composite nanostructure. Eng Comput. https://doi.org/10.1007/s00366-020-01110-y

    Article  Google Scholar 

  70. Van Do VN, Lee C-H (2021) Isogeometric nonlinear bending and instability analysis of cylindrical composite shells reinforced with graphene platelets. Compos Struct 258:113401

    Google Scholar 

  71. Thai CH, Ferreira AJM, Phungvan P (2019) Size dependent free vibration analysis of multilayer functionally graded GPLRC microplates based on modified strain gradient theory. Compos Part B Eng 169:174–188

    Google Scholar 

  72. Al-Furjan M, Moghadam SA, Dehini R, Shan L, Habibi M, Safarpour H (2020) Vibration control of a smart shell reinforced by graphene nanoplatelets under external load: semi-numerical and finite element modeling. Thin Walled Struct 107242

  73. Rafiee MA, Rafiee J, Wang Z, Song H, Yu Z-Z, Koratkar N (2009) Enhanced mechanical properties of nanocomposites at low graphene content. ACS Nano 3:3884–3890

    Google Scholar 

  74. Safarpour M, Ghabussi A, Ebrahimi F, Habibi M, Safarpour H (2020) Frequency characteristics of FG-GPLRC viscoelastic thick annular plate with the aid of GDQM. Thin Walled Struct 150:106683

    Google Scholar 

  75. Ghabussi A, Habibi M, NoormohammadiArani O, Shavalipour A, Moayedi H, Safarpour H (2020) Frequency characteristics of a viscoelastic graphene nanoplatelet–reinforced composite circular microplate. J Vib Control. https://doi.org/10.1177/1077546320923930

    Article  Google Scholar 

  76. Shariati A, Ghabussi A, Habibi M, Safarpour H, Safarpour M, Tounsi A, Safa M (2020) Extremely large oscillation and nonlinear frequency of a multi-scale hybrid disk resting on nonlinear elastic foundation. Thin Walled Struct 154:106840

    Google Scholar 

  77. Al-Furjan M, Habibi M, Ni J, won Jung D, Tounsi A, (2020) Frequency simulation of viscoelastic multi-phase reinforced fully symmetric systems. Eng Comput. https://doi.org/10.1007/s00366-020-01200-x

    Article  Google Scholar 

  78. Reddy JN, Liu CF (1985) A higher-order shear deformation theory of laminated elastic shells. Int J Eng Sci 23:319–330

    MATH  Google Scholar 

  79. Al-Furjan M, Samimi-Sohrforozani E, Habibi M, won Jung D, Safarpour H (2021) Vibrational characteristics of a higher-order laminated composite viscoelastic annular microplate via modified couple stress theory. Compos Struct 257:113152

    Google Scholar 

  80. Al-Furjan M, Habibi M, Shan L, Tounsi A (2021) On the vibrations of the imperfect sandwich higher-order disk with a lactic core using generalize differential quadrature method. Compos Struct 257:113150

    Google Scholar 

  81. Al-Furjan M, Mohammadgholiha M, Alarifi IM, Habibi M, Safarpour H (2020) On the phase velocity simulation of the multi curved viscoelastic system via an exact solution framework. Eng Comput. https://doi.org/10.1007/s00366-020-01152-2

    Article  Google Scholar 

  82. Al-Furjan M, Fereidouni M, Sedghiyan D, Habibi M, won Jung D (2021) Three-dimensional frequency response of the CNT-Carbon-Fiber reinforced laminated circular/annular plates under initially stresses. Compos Struct 257:113146

    Google Scholar 

  83. Al-Furjan M, Oyarhossein MA, Habibi M, Safarpour H, Jung DW (2020) Frequency and critical angular velocity characteristics of rotary laminated cantilever microdisk via two-dimensional analysis. Thin Walled Struct 157:107111

    Google Scholar 

  84. Auricchio F, Veiga LBD, Buffa A, Lovadina C, Reali A, Sangalli G (2007) A fully “locking-free” isogeometric approach for plane linear elasticity problems: a stream function formulation. Comput Methods Appl Mech Eng 197:160–172

    MathSciNet  MATH  Google Scholar 

  85. Hughes TJR, Cottrell JA, Bazilevs Y (2005) Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement. Comput Methods Appl Mech Eng 194:4135–4195

    MathSciNet  MATH  Google Scholar 

  86. Piegl L, Tiller W (2012) The NURBS book. Springer Science & Business Media

    MATH  Google Scholar 

  87. Tao C, Dai T (2020) Isogeometric analysis for postbuckling of sandwich cylindrical shell panels with graphene platelet reinforced functionally graded porous core. Compos Struct 260:113258

    Google Scholar 

  88. Crisfield MA (1981) A fast incremental/iterative solution procedure that handles “snap-through.” Comput Struct 13:55–62

    MATH  Google Scholar 

  89. Phung-Van P, Thai CH, Nguyen-Xuan H, Wahab MA (2019) Porosity-dependent nonlinear transient responses of functionally graded nanoplates using isogeometric analysis. Compos B Eng 164:215–225

    Google Scholar 

  90. Tran LV, Lee J, Nguyen-Van H, Nguyen-Xuan H, Wahab MA (2015) Geometrically nonlinear isogeometric analysis of laminated composite plates based on higher-order shear deformation theory. Int J Nonlinear Mech 72:42–52

    Google Scholar 

  91. Sze KY, Liu XH, Lo SH (2004) Popular benchmark problems for geometric nonlinear analysis of shells. Finite Elem Anal Des 40:1551–1569

    Google Scholar 

  92. Kundu CK, Sinha PK (2007) Post buckling analysis of laminated composite shells. Compos Struct 78:316–324

    Google Scholar 

  93. Crisfield MA (1979) A faster modified newton-raphson iteration. Comput Methods Appl Mech Eng 20:267–278

    MathSciNet  MATH  Google Scholar 

  94. Nguyen TN, Thai CH, Luu A, Nguyenxuan H, Lee J (2019) NURBS-based postbuckling analysis of functionally graded carbon nanotube-reinforced composite shells. Comput Methods Appl Mech Eng 347:983–1003

    MathSciNet  MATH  Google Scholar 

  95. Surana KS (1983) Geometrically nonlinear formulation for the curved shell elements. Int J Numer Methods Eng 19:581–615

    MATH  Google Scholar 

  96. Shen H, Xiang Y (2012) Nonlinear vibration of nanotube-reinforced composite cylindrical shells in thermal environments. Comput Methods Appl Mech Eng 213:196–205

    MathSciNet  MATH  Google Scholar 

  97. Huang K, Guo H, Qin Z, Cao S, Chen Y (2020) Flutter analysis of laminated composite quadrilateral plates reinforced with graphene nanoplatelets using the element-free IMLS-Ritz method. Aerosp Sci Technol 103:10591

    Google Scholar 

  98. Thai CH, Tran LV, Tran DT, Nguyen-Thoi T, Nguyen-Xuan H (2012) Analysis of laminated composite plates using higher-order shear deformation plate theory and node-based smoothed discrete shear gap method. Appl Math Model 36:5657–5677

    MathSciNet  MATH  Google Scholar 

  99. Yin S, Hale JS, Yu T, Bui TQ, Bordas SP (2014) Isogeometric locking-free plate element: a simple first order shear deformation theory for functionally graded plates. Compos Struct 118:121–138

    Google Scholar 

Download references

Acknowledgements

The second author would like to thank the support from the Natural Science Foundation of Hunan Province, China (Grant No. 2020JJ5681).

Author information

Authors and Affiliations

  1. State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha, 410082, China

    Chang Tao

  2. Department of Engineering Mechanics, College of Mechanical and Vehicle Engineering, Hunan University, Changsha, 410082, China

    Chang Tao

  3. School of Aeronautics and Astronautics, Central South University, Changsha, 410082, China

    Ting Dai

Authors
  1. Chang Tao
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Ting Dai
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Chang Tao.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Tao, C., Dai, T. Postbuckling of multilayer cylindrical and spherical shell panels reinforced with graphene platelet by isogeometric analysis. Engineering with Computers 38 (Suppl 3), 1885–1900 (2022). https://doi.org/10.1007/s00366-021-01360-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00366-021-01360-4

Keywords

Search

Navigation