Abstract
The construction conditions of transmission lines are becoming more and more difficult. It is necessary to find new ways to reduce the grounding resistance of poles and towers at high soil resistivity and small construction area. Conductive cement samples with graphite, stainless steel fibers, and their mixtures as conductive phases materials were prepared, the resistivity, flexural strength and compressive strength were tested, compared and analyzed. The graphite and stainless steel fiber conductive cement with better comprehensive performance was selected out for tower grounding. The application schemes of conductive cement for tower grounding were designed and compared, the partial wrapping scheme was selected and its application methods under different soil resistivity was analyzed. The analysis results can provide theoretical basis and guidance for the application of conductive cement in transmission tower grounding, the feasibility of scheme is proved by the field application.
Similar content being viewed by others
References
Smohai B, Ladanyi J (2015) Analysis of methods to reduce the ground resistance of transmission line towers. In: 2015 5th international youth conference on energy (IYCE), Pisa, 2015, pp 1–6
Alves ACB (2014) Contributions to the calculation of reduction factor of contact resistance of the foot on grounding projects. IEEE Latin Am Trans 12(2):153–160
Gouda OE, Dessouky SS, Kalas AE et al (2018) Current distribution in grounding grid conductors with and without vertical rods buried in two-layer soil model. IEEJ Trans Electr Electron Eng 13(9):1276–1284
Gatta FM, Geri A, Maccioni M, et al. (2017) Design approaches for EHV OHL “compact” tower grounding systems. In: 2017 IEEE international conference on environment and electrical engineering and 2017 IEEE industrial and commercial power systems Europe (EEEIC/I&CPS Europe), Milan, 2017, pp 1–6
Binxin Xu, Xiangfei Li, De Li (2015) Research and application of` 3D grounding grid in substation. J Hunan Univ Technol 29(06):58–63
Bo Li (2016) Choice of earth material under different corrosive conditions. Northeast Electr Power Technol 37(1):44–46
Qingbo M, Jinliang He (1996) A new method to decrease grounding resistances of grounding systems. High Voltage Eng 02:67–68
Wang P, Xuewen FU, Wei ZJ (2012) Research and application of new high efficiency resistance reducing grounding module. Insul Surge Arresters 2012(01):70–76
Fuqing S, Jinglu L (2007) Application analysis of grounding resistance reduction measures. J Electr Power Sci Technol 02:84–88
Yi H, Linon W, Chuanguang Z (2004) Analysis of corrosion-proof problem in grounding equipment of transmission line using resistance-reducing agent. High Voltage Eng 07:17–36
Tengfei L, Richeng L, Junwen P et al (2018) Effect of resistance reducing agent on electrical performance parameters of vertical DC grounding electrode. Insul Surge Arresters 01:132–136
Cai P (2018) Corrosion reason of grounding grid at some towers of a 500 kV transmission line. Corros Prot 39(09):708–712
Gong R (2015) Comparative analysis of HM-JD-L28 composited grounding conductor and routine grounding resistance reducing measure. Insul Surge Arresters 6:69–72
Yan G, Jianming Z, Chang Z et al (2017) The application of flexible graphite composite electrical grounding material in mountain grounding grid. Sci Technol Eng 17(10):198–201
Wang LN, Aslani F, Wang AF et al (2019) A review on material design, performance, and practical application of electrically conductive cementitious composites. Constr Build Mater 229(12):1–37
Zhou Z, Xie N, Cheng X et al (2020) Electrical properties of low dosage carbon nanofiber/cement composite: percolation behavior and polarization effect. Cement Concr Compos 109(5):1–9
Zeng W (2004) Preparation of conductive PET fiber and its application in electromagnetic shielding. Xiangtan University, Xiangtan
Jinrong W, Yongming D (2008) The application of conductive cement in the grounding network reconstruction of Baisha Hydropower Station. Electr Equip 9(4):67–69
National Bureau of Quality and Technical Supervision (1999) Testing method for strength of cement mortar (ISO): GB/T 17671–1999 [S]. Standard Press of China, Beijing
China Electrical Council (2011) Grounding design specification for AC electrical installations: GB 50065–2011. China Planning Press, Beijing
Acknowledgements
This work was supported by the State Grid Jiangxi Electric Power Co., Ltd under Grant No. 52182018000T.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Lun, L., Tian, X., Pei, F. et al. Resistance Reduction Scheme for Tower Grounding with Conductive Cement. J. Electr. Eng. Technol. 16, 1731–1742 (2021). https://doi.org/10.1007/s42835-021-00679-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42835-021-00679-8