Abstract
Experience in the use of multipurpose modifiers in adhesion systems based on chloroprene rubber, which increase the performance characteristics of adhesive joint of vulcanized rubbers, is described. It is shown that the developed modified adhesive composition possesses high thermal stability and improved adhesion characteristics.
Similar content being viewed by others
REFERENCES
Yu. A. Treger, K. A. Morozov, G. S. Dasaeva, and A. K. Frolkova, “Chloroprene rubber: Application and production,” Fine Chem. Technol. 13 (4), 26–38.
N. A. Tret’yakova, Candidate’s Dissertation in Engineering (Moscow, 2013).
V. F. Kablov, N. A. Keibal, D. A. Provotorova, and A. E. Mitchenko, “The use of a phosphorus-boron-nitrogen-containing modifier in adhesive compositions based on chlorine-containing rubbers in order to improve the adhesive properties,” Izv. Volgogr. Gos. Tekh. Univ., Ser. Khim. Tekhnol. Elementoorg. Monomerov Polim. Mater., No. 7, 71–74 (2015).
V. F. Kablov, N. A. Keibal, A. E. Mitchenko, Yu. Yu. Emel’yanova, Yu. I. Yumagulova, and S. P. Varfolomeeva, “Development of phosphorus-boron-nitrogen-containing modifier for elastomeric compositions,” Polym. Sci., Ser. D 9, 172–175 (2016).
A. V. Pocius, Adhesion and Adhesives Technology: An Introduction (Hanser Publ., 1997).
V. T. Prokhorov, I. M. Mal’tsev, and E. I. Kovalenko, Improving the Technology of Gluing Leather Goods: Monograph (YuRGUES, Shakhty, 2002).
A. M. Dumanskii, Problems of Materials Science in Mechanical Engineering (Inst. Komp’yut. Issled., Moscow–Izhevsk, 2015) [in Russian].
Funding
The work was supported by the Russian Foundation for Basic Research and Administration of Volgograd oblast, project no. 19-43-340001 r-a.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by A. Muravev
Rights and permissions
About this article
Cite this article
Keibal, N.A., Kablov, V.F., Ismailov, V.V. et al. The Use of Multipurpose Modifiers in Adhesive Compositions Based on Chloroprene Rubber to Increase Thermal Stability. Polym. Sci. Ser. D 14, 38–41 (2021). https://doi.org/10.1134/S1995421221010093
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421221010093