Abstract
Heave plates are structural components used for reducing the vibrations caused by environmental forces on marine and offshore structures by changing the hydrodynamic properties. The fact that the added mass increase via heave plates does not always lead to the structural response reduction underscores the role of damping in maintaining the vibration amplitude within allowable limits. In the present experimental study, a novel combined rigid-elastic design is used to improve the damping through the velocity increase in the elastic part and added mass creation in the central rigid part. The desired percentage of total added mass and damping can be adjusted by changing the rigid-to-elastic parts diameter ratio, which is the main scope of this experimental research. Frequency of vibration, which affects the elastic edge excited mode shapes, also affects the forming of the vortex shedding. Experimental tests show that the frequency increase generally causes high damping performance provided that the excited mode shapes are axisymmetric, which strongly depends on equivalent stiffness and mass.
Similar content being viewed by others
References
Sarpkaya T, Isaacson M (1981) Mechanics of wave forces on offshore structures. Van Nostrand Reinhold Co., New York
Thiagarajan K, Troesch A (1994) Hydrodynamic heave damping estimation and scaling for tension leg platforms. J Offshore Mech Arctic Eng. 116(2):70–76
Thiagarajan K, Troesch AW (1998) Effects of appendages and small currents on the hydrodynamic heave damping of TLP columns. J Offshore Mech Arctic Eng 120(1):37–42
Lake M et al (2000) Hydrodynamic coefficient estimation for TLP and Spar structures. J Offshore Mech Arctic Eng 122(2):118–124
Zhu L, Lim H-C (2017) Hydrodynamic characteristics of a separated heave plate mounted at a vertical circular cylinder. Ocean Eng 131:213–223
Tao L, Cai S (2004) Heave motion suppression of a Spar with a heave plate. Ocean Eng 31(5):669–692
Tao L, Thiagarajan K (2003) Low KC flow regimes of oscillating sharp edges. II. Hydrodynamic forces. Appl Ocean Res 25(2):53–62
Tao L et al (2007) Spacing effects on hydrodynamics of heave plates on offshore structures. J Fluids Struct 23(8):1119–1136
Sudhakar S, Nallayarasu S (2013) Hydrodynamic response of spar with single and double heave plates in regular waves. Int J Ocean Syst Eng 3(4):188–208
Philip NT, Nallayarasu S, Bhattacharyya S (2019) Experimental investigation and CFD simulation of heave damping effects due to circular plates attached to spar hull. Ships Offshore Struct 14(4):396–411
Prislin I, Blevins R, Halkyard J (1998) Viscous damping and added mass of solid square plates. In: Proceedings of the 17th international conference on offshore mechanics and arctic engineering (OMAE). ASME
Li J et al (2013) Experimental investigation of the hydrodynamic characteristics of heave plates using forced oscillation. Ocean Eng 66:82–91
Lopez-Pavon C, Souto-Iglesias A (2015) Hydrodynamic coefficients and pressure loads on heave plates for semi-submersible floating offshore wind turbines: a comparative analysis using large scale models. Renew Energy 81:864–881
An S, Faltinsen OM (2013) An experimental and numerical study of heave added mass and damping of horizontally submerged and perforated rectangular plates. J Fluids Struct 39:87–101
Chua KH, et al (2005) Model experiments of hydrodynamic forces on heave plates. In: ASME 2005 24th international conference on offshore mechanics and arctic engineering. American Society of Mechanical Engineers
Tao L, Dray D (2008) Hydrodynamic performance of solid and porous heave plates. Ocean Eng 35(10):1006–1014
Zhang S, Ishihara T (2018) Numerical study of hydrodynamic coefficients of multiple heave plates by large eddy simulations with volume of fluid method. Ocean Eng 163:583–598
Yucheng L, Bin T (2002) Wave action on maritime structures. China Ocean Press, Beijing
Philip NT, Nallayarasu S, Bhattacharyya S (2019) Experimental investigation and CFD simulation of heave damping effects due to circular plates attached to spar hull. Ships Offshore Struct 14(4):396–411
Hengstler J, Dual J (2011) Fluid structure interaction of a vibrating circular plate in a bounded fluid volume: simulation and experiment. Fluid Struct Interact VI 115:3
Askari E, Jeong K-H, Amabili M (2013) Hydroelastic vibration of circular plates immersed in a liquid-filled container with free surface. J Sound Vib 332(12):3064–3085
Moreno J, et al (2015) Hydrodynamic performance of heave plates on floating offshore wind turbine platforms. In: The twenty-fifth international offshore and polar engineering conference. International Society of Offshore and Polar Engineers
Abazari A, Behzad M, Thiagarajan KP (2020) Hydrodynamic performance of multiple co-axial heave plates with different diameters. Ships Offshore Struct 15(4):380–392
Garrido-Mendoza CA et al (2015) Computation of flow features and hydrodynamic coefficients around heave plates oscillating near a seabed. J Fluids Struct 59:406–431
Tian X, et al (2013) Experimental investigations on the hydrodynamic characteristics of heave plate. In: ASME 2013 32nd international conference on ocean, offshore and arctic engineering. American Society of Mechanical Engineers
Tao L, Thiagarajan K (2003) Low KC flow regimes of oscillating sharp edges I. Vortex shedding observation. Appl Ocean Res 25(1):21–35
ITTC (2008) Guide to the expression of uncertainty in experimental hydrodynamics. Technical report
Rao SS (2007) Vibration of continuous systems. Wiley, Hoboken
Ugural AC (2009) Stresses in beams, plates, and shells. CRC Press, Boca Raton
Garrido-Mendoza CA, Souto-Iglesias A, Thiagarajan K (2013) Numerical simulation of hydrodynamics of a circular disk oscillating near a seabed. In: ASME 2013 32nd international conference on ocean, offshore and arctic engineering. American Society of Mechanical Engineers
Wadhwa H, Thiagarajan KP (2009) Experimental assessment of hydrodynamic coefficients of disks oscillating near a free surface. In: ASME 2009 28th international conference on ocean, offshore and arctic engineering American Society of Mechanical Engineers
Tao L, Lim KY, Thiagarajan K (2004) Heave response of classic spar with variable geometry. J Offshore Mech Arctic Eng 126(1):90–95
Acknowledgements
The first author appreciates the support of the Manager of Crosby Hall, Stephen Abbadessa, and provides thanks to the Ministry of Science, Research, and Technology in Iran for partially supporting the stay in US. The first author also would like to express his gratitude to Walter Morris and Christopher Urquhart of Advance Composite Center in UMAINE for their assistance in a technical part of this research.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Abazari, A., Behzad, M. & Thiagarajan, K. Hydrodynamic damping enhancement by implementing a novel combined rigid-elastic heave plate. J Mar Sci Technol 26, 216–232 (2021). https://doi.org/10.1007/s00773-020-00732-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00773-020-00732-7