Retraction Note: The International Journal of Advanced Manufacturing Technology (2014) 72:905–917
The Editor-in-Chief has retracted this article [1] because it contains material that significantly overlaps with other published articles [2, 3]. F.L. Amorim, T. Czelusniak, and C. Higa do not agree to this retraction/ A. Lohrengel has not responded to any correspondence from the editor/publisher about this retraction.
References
Czelusniak T, Amorim FL, Lohrengel A et al (2014) Development and application of copper–nickel zirconium diboride as EDM electrodes manufactured by selective laser sintering. Int J Adv Manuf Technol 72:905–917. https://doi.org/10.1007/s00170-014-5728-4
Amorim FL, Lohrengel A, Neubert V, Higa CF, Czelusniak T (2014) Selective laser sintering of Mo-CuNi composite to be used as EDM electrode. Rapid Prototyping J. https://doi.org/10.1108/RPJ-04-2012-0035
Amorim FL, Lohrengel A, Schaefer G, Czelusniak T (2013) A study on the SLS manufacturing and experimenting of TiB2-CuNi EDM electrodes. Rapid Prototyping J 19:418–429. https://doi.org/10.1108/RPJ-03-2012-0019
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
The online version of the original article can be found at https://doi.org/10.1007/s00170-014-5728-4
About this article
Cite this article
Czelusniak, T., Amorim, F.L., Lohrengel, A. et al. Retraction Note: Development and application of copper–nickel zirconium diboride as EDM electrodes manufactured by selective laser sintering. Int J Adv Manuf Technol 113, 621 (2021). https://doi.org/10.1007/s00170-020-06547-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-020-06547-5