Ametallographic study of advanced low-carbon martensitic steel with high resistance of the supercooled austenite to the transformations by pearlitic and bainitic mechanisms under continuous cooling is performed. The critical temperatures of the transformations occurring under heating and cooling are determined. The kinetics of the isothermal transformation of the austenite in the temperature range of 300 – 400°C is analyzed. The possibility of successful implementation of isothermal quenching of the steel after carburizing is demonstrated.
Similar content being viewed by others
Notes
The authors acknowledge the help of M. A. Ryzhkov and A. Yu. Kaletin in the metallographic and dilatometric studies.
References
J. Fajoui, M. Kchaou, A. Sellami, et al., “Impact of residual stresses on mechanical behavior of hot work steels,” Eng. Failure Anal., 94, 33 – 40 (2018).
A. K. Nallathambi, Y. Kaymak, E. Specht, and A. Bertram, “Sensitivity of material properties on distortion and residual stresses during metal quenching processes,” J. Mater. Proc. Technol., 210(2), 204 – 211 (2010).
M. V. Maisuradze, Yu. V. Yudin, and M. A. Ryzhkov, “Investigation and development of spray cooling device for heat treatment of large steel forgings,” Mater. Perform. Character., 3(4), 449 – 462 (2014).
M. V. Maisuradze, M. A. Ryzhkov, Yu. V. Yudin, and A. A. Ershov, “Heat treatment technology for high-strength engineering steel variable cross-section components,” Metallurgist, 58(7 – 8), 712 – 716 (2014).
L. E. Popova and A. A. Popov, Diagrams of Austenite Transformation in Steels and of Beta-Solution in Titanium Alloys [in Russian], Metallurgiya, Moscow (1991), 503 p.
L. M. Kleiner, D. M. Larinin, L. V. Spivak, and A. A. Shatsov, “Phase and structural transformations in low-carbon martensitic steels,” Phys. Met. Metallogr., 108(2), 153 – 160 (2009).
V. A. Kozvonin, A. A. Shatsov, I. V. Ryaposov, et al., “Structure, phase transformations, mechanical characteristics, and cold resistance of low-carbon martensitic steels,” Phys. Met. Metallogr., 117(8), 834 – 842 (2016).
D. M. Larinin, L. M. Kleiner, and A. A. Shatsov, “Structural strength of low-carbon martensitic steel 12Kh2G2NMFB,” Metal Sci. Heat Treat., 52, 545 – 549 (2011).
S. K. Berezin, A. A. Shatsov, P. O. Bykova, and D. M. Larinin, “Martensitic transformation in low-carbon steels,” Metal Sci. Heat Treat., 59(7 – 8), 479 – 485 (2017).
J. G. Speer, “Phase transformations in quenched and partitioned steels,” in: E. Pereloma and D. V. Edmonds (eds.), Phase Transformations in Steels, Woodhead Publishing Ltd., Cambridge (2012), pp. 247 – 270.
S. Kang, K. Kim, Y. Son, and S.-J. Lee, “Application of the quenching and partitioning (Q&P) process to D6AC steel,” ISIJ Int., 56, 2057 – 2061 (2016).
J. G. Speer, E. De Moor, and A. J. Clarke, “Critical assessment 7: Quenching and partitioning,” Mater. Sci. Technol., 31, 3 – 9 (2015).
M. A. Ryzhkov and A. A. Popov, “Methodological aspects of plotting of thermokinetic diagrams of transformation of supercooled austenite in low-alloy steels,” Metal Sci. Heat Treat., 52(11 – 12), 612 – 616 (2011).
T. A. Kop, J. Sietsma, and S. Van Der Zwaag, “Dilatometric analysis of phase transformations in hypo-eutectoid steels,” J. Mater. Sci., 36, 519 – 526 (2001).
M. V. Maisuradze, Yu. V. Yudin, and M. A. Ryzhkov, “Numerical simulation of pearlitic transformation in steel 45Kh5MF,” Metal Sci. Heat Treat., 56, 512 – 516 (2015).
Yu. V. Yudin, M. V. Maisuradze, and A. A. Kuklina, “Describing the isothermal bainitic transformation in structural steels by a logistical function,” Steel in Trans., 47(3), 213 – 218 (2017).
M. V. Maisuradze, Yu. V. Yudin, and A. A. Kuklina, “Novel approach for analytical description of the isothermal bainite transformation in alloyed steels,” Mater. Perform. Charact., 8(2), 80 – 95 (2019).
G. Gao, H. Zhang, Z. Tan, et al., “A carbide-free bainite/martensite/austenite triplex steel with enhanced mechanical properties treated by a novel quenching-partitioning-tempering process,” Mater. Sci. Eng. A, 59, 165 – 169 (2013).
H. Zhang, D. Ponge, and D. Raabe, “Superplastic Mn – Si – Cr – C duplex and triplex steels: Interaction of microstructures and void formation,” Mater. Sci. Eng. A, 610, 355 – 369 (2014).
H. Guo, G. Gao, X. Gui, et al., “Structure-property relation in a quenched-partitioned low alloy steel involving bainite transformation,” Mater. Sci. Eng. A, 667, 224 – 231 (2016).
The work has been performed with support of the program for raising the competitiveness of the Ural Federal University.
Author information
Authors and Affiliations
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 9, pp. 9 – 16, September, 2020.
Rights and permissions
About this article
Cite this article
Maisuradze, M.V., Yudin, Y.V. & Kuklina, A.A. Formation of Microstructure in Advanced Low-Carbon Steel of Martensitic Class Under Heat Treatment. Met Sci Heat Treat 62, 550–556 (2021). https://doi.org/10.1007/s11041-021-00601-z
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-021-00601-z