Skip to main content
SpringerLink
Log in

High temperature effects on different grades of concrete

  • Published:
Sādhanā Aims and scope Submit manuscript

Abstract

Concrete structures are liable to be exposed to fire during their lifetime. After exposure to high temperature, the strength of concrete is determined only by its residual properties. The method of cooling, after exposure, is one of the significant factors in determining the residual properties of concrete. The compressive strength, tensile strength, stress-strain response and elastic modulus of concrete are the important properties to be considered in the design of fire resistant structures. In this paper, the behaviour of high temperature exposure of three different grades of concrete M20, M45 and M60 are considered. The specimens were subjected to high temperature regime of 100°C–900°C and were cooled by different methods. The maximum degradation of mechanical properties was observed between temperature regimes of 400°C to 600°C. High strength concrete was found to be more vulnerable compared to normal strength concrete. Mathematical models expressing the variation of different mechanical properties of concrete were developed and explained.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
Figure 12
Figure 13
Figure 14

Similar content being viewed by others

References

  1. Yang H, Zhao H, and Liu F 2018 Residual cube strength of coarse RCA concrete after exposure to elevated temperatures. Fire and Materials Journal. 42 (4):424–435

    Article  Google Scholar 

  2. Ulm F J, Coussy O, Bazant Z P 1999 The Chunnel fire. I: Chemoplastic softening in rapidly heated concrete. Journal of Engineering Mechanics. 125 (3): 272–281

    Article  Google Scholar 

  3. Noumowe A and Debicki G 2002 Effect of elevated temperature from 200 to 600 °C on the permeability of high performance concrete. In: Proceedings of the 6th International Symposium on Utilization of high strength/performance concrete (Vol. 1)

  4. Bamonte P and Monte F L 2015 Reinforced concrete columns exposed to standard fire: Comparison among different constitutive models for concrete at high temperature. Fire Safety Journal. 71:310–323

    Article  Google Scholar 

  5. Kodur V 2014 Properties of concrete at elevated temperatures. International Scholarly Research Notices. Article ID 168310: 1–15

    Google Scholar 

  6. Bikhiet M M, El-Shafey N F, and El-Hashimy H M 2014 Behavior of reinforced concrete short columns exposed to fire. Alexandria Eng. J. 53:643–653

    Article  Google Scholar 

  7. Mehta P K and Monteiro P J 2017 Chapter 3: Strength. Concrete microstructure, properties and materials. McGraw-Hill New York USA, 3rd Edition. pp. 49–84

  8. Mindess S, Young J F and Darwin D 2003 Concrete. 2nd Edition, Prentice – Hall, Upper Saddle River

  9. Khaliq W and Kodur V 2012. High Temperature Mechanical Properties of High-Strength Fly Ash Concrete with and without Fibers. ACI Materials Journal, 109(6) : 665–674

    Google Scholar 

  10. Portland Cement Association. Research and Development Laboratories, 1966. Journal of the PCA Research and Development Laboratories (Vol. 8). Research and Development Laboratories, Portland Cement Association

  11. Diederichs U, Ehm C, Weber A and Becker G 1987. Deformation behaviour of HTR-concrete under biaxial stresses and elevated temperatures. Transactions of the 9th international conference on structural mechanics in reactor technology. Vol. H:17–21

  12. Flynn D R 1999 NIST GCR 99-767–Response of High Performance Concrete to Fire Conditions: Review of Thermal Property Data and Measurement Techniques. National Institute of Standards and Technology, Gaithersburg. MD. USA. 119–134

  13. European Committee for Standardization, 2004. Eurocode 2: Design of concrete structures—Part 1–2: General rules—Structural fire design

  14. ASCE1992 Structural Fire Protection ASCE Committee on fire Protection. Structural Division ASCE New York USA

  15. Chang Y F, Chen Y H, Sheu M S and Yao G C 2006. Residual stress–strain relationship for concrete after exposure to high temperatures. Cement and Concrete Research, 36(10):1999–2005

    Article  Google Scholar 

  16. Kodur V K R., Wang T C and Cheng F P 2004. Predicting the fire resistance behaviour of high strength concrete columns. Cement and Concrete Composites, 26(2): 141–153

    Article  Google Scholar 

  17. Lie T T, Rowe T J and Lin T D 1986. Residual strength of fire-exposed reinforced concrete columns. Special Publication, 92:153–174

    Google Scholar 

  18. IS 12269, 2013 Ordinary Portland Cement, 53 Grade - Specification. BIS New Delhi

  19. IS 383, 2016 Coarse And Fine Aggregates For Concrete - Specification.BIS New Delhi

  20. IS 8142, 2013 Method Of Test For Determining Setting Time Of Concrete By Penetration Resistance.BIS New Delhi

  21. IS 10262, 2019 Concrete Mix Proportioning – Guidelines. BIS, New Delhi 110002

    Google Scholar 

  22. Bazant Z P and Chern J C 1987. Stress-induced thermal and shrinkage strains in concrete. Journal of Engineering Mechanics, 113(10):1493–1511

    Article  Google Scholar 

  23. Terro M J 1998. Numerical modeling of the behavior of concrete structures in fire. ACI Structural Journal, 95:183–193

    Google Scholar 

  24. Anderberg Y and Thelandersson S 1976. Stress and deformation characteristics of concrete at high temperatures: experimental investigation and material behaviour model. Lund, Sweden: Lund Institute of Technology

    Google Scholar 

  25. BS 8110 1997 BSI Structural Use of Concrete. British Standards Institution. BS 8110

  26. Li L Y and Purkiss J 2005. Stress–strain constitutive equations of concrete material at elevated temperatures. Fire Safety Journal, 40(7): 669–686

    Article  Google Scholar 

  27. Krishna D A, Priyadarsini R S and Narayanan S 2019. Effect of elevated temperatures on the mechanical properties of concrete. Procedia Structural Integrity, 14:384–394

    Article  Google Scholar 

  28. ACI 318R-19, Building Code Requirements for Structural Concrete First printing: June 2019 ISBN: 978-1-64195-056-5 https://doi.org/10.14359/51716937

  29. IS 456: 2000 Indian Standard for Plain and Reinforced Concrete – Code of Practice. BIS, New Delhi

  30. ACI 214R-11, Guide to Evaluation of Strength Test Results of Concrete ACI 214R-11 supersedes 214R-02 and was adopted and published April 2011. American Concrete Institute. ISBN 978-0-87031-4230

  31. BS EN 206:2013, Concrete - Specification, performance, production and conformity BSI Standards Publication Supersedes EN 206-1:2000, EN 206-9:2010, May 2014

Download references

Acknowledgements

Funding was provided by CERD (KTU/Research 2/2743/2017 dated 07/11/2017 of the Kerala Technological University).

Author information

Authors and Affiliations

  1. Civil Engineering Department, College of Engineering Thiruvananthapuram, Thiruvananthapuram, India

    D ANUPAMA KRISHNA & R S PRIYADARSINI

  2. Civil Engineering Department, Marian Engineering College, Thiruvananthapuram, India

    S NARAYANAN

Authors
  1. D ANUPAMA KRISHNA
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. R S PRIYADARSINI
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. S NARAYANAN
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to R S PRIYADARSINI.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

ANUPAMA KRISHNA, D., PRIYADARSINI, R.S. & NARAYANAN, S. High temperature effects on different grades of concrete. Sādhanā 46, 31 (2021). https://doi.org/10.1007/s12046-020-01536-6

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s12046-020-01536-6

Keywords

Search

Navigation