To read this content please select one of the options below:

Error analysis and optimal design of reduction relay lens for field of view stitching applications

Xinjie Zhang (School of Mechanical and Aerospace Engineering, Jilin University, Changchun, China and Changchun Institute of Optics Fine Mechanics and Physics Chinese Academy of Sciences, Changchun, China)
Fansen Kong (School of Mechanical and Aerospace Engineering, Jilin University, Changchun, China)
Zhiyuan Gu (Changchun Institute of Optics Fine Mechanics and Physics Chinese Academy of Sciences, Changchun, China)
Xiao Shen (Changchun Institute of Optics Fine Mechanics and Physics Chinese Academy of Sciences, Changchun, China)

Sensor Review

ISSN: 0260-2288

Article publication date: 3 February 2021

Issue publication date: 24 February 2021

115

Abstract

Purpose

FOV splicing optical remote sensing instruments have a strict requirement for the focal length consistency of the lens. In conventional optical-mechanical structure design, each optical element is equally distributed with high accuracy and everyone must have a high machining and assembly accuracy. For optical remote sensors with a large number of optical elements, this design brings great difficulties to lens manufacture and alignment.

Design/methodology/approach

Taking the relay lens in an optical remote sensing instrument with the field of view splicing as an example, errors of the system are redistributed to optical elements. Two optical elements, which have the greatest influence on modulation transfer function (MTF) of the system are mounted with high accuracy centering and the other elements are fixed by gland ring with common machining accuracy. The reduction ratio consistency difference among lenses is compensated by adjusting the optical spacing between the two elements.

Findings

Based on optical system simulation analysis, the optimized structure can compensate for the difference of reduction ratio among lens by grinding the washer thickness in the range of ±0.37 mm. The test data for the image quality of the lens show that the MTF value declined 0.043 within ±0.4 mm of space change between two barrels. The results indicate that the reduction ratio can be corrected by adjusting the washer thickness and the image quality will not obviously decline.

Originality/value

This paper confirms that this work is original and has not been published elsewhere nor is it currently under consideration for publication elsewhere. In this paper, the optimum structural design of the reduction relay lens for the field of view stitching applications is reported. The method of adjusting washer thickness is applied to compensate for the reduction ratio consistency difference of lenses. The optimized structure also greatly reduces the difficulty of lenses manufacture, alignment and improves the efficiency of assembly.

Keywords

Citation

Zhang, X., Kong, F., Gu, Z. and Shen, X. (2021), "Error analysis and optimal design of reduction relay lens for field of view stitching applications", Sensor Review, Vol. 41 No. 1, pp. 87-92. https://doi.org/10.1108/SR-03-2020-0070

Publisher

:

Emerald Publishing Limited

Copyright © 2021, Emerald Publishing Limited

Related articles