Hostname: page-component-848d4c4894-wzw2p Total loading time: 0 Render date: 2024-05-08T12:16:03.441Z Has data issue: false hasContentIssue false
  • English
  • Français

Investigation of longitudinal friction characteristics of an omnidirectional wheel via LuGre model

Published online by Cambridge University Press:  03 February 2021

Osman Nuri Şahin Open the ORCID record for Osman Nuri Şahin [Opens in a new window]  and
Mehmet İsmet Can Dede
Osman Nuri Şahin*
Affiliation:
Department of Mechanical Engineering, Izmir Institute of Technology, Izmir, Turkey
Mehmet İsmet Can Dede
Affiliation:
Department of Mechanical Engineering, Izmir Institute of Technology, Izmir, Turkey
*
*Corresponding author. E-mail: osmansahin@iyte.edu.tr
Get access Rights & Permissions [Opens in a new window]

Summary

In recent years, omnidirectional wheels have found more applications in the design of automated guided vehicles (AGV). In this work, LuGre friction model is used for an omnidirectional wheel. A test setup that includes a single omnidirectional wheel is designed and constructed to identify the model parameters. With the help of the constructed test setup, the longitudinal friction characteristic of the omnidirectional wheel is obtained, and the model is verified via validation tests. In addition, for the first time, the effect of lateral frictional force on longitudinal motion is examined for an omnidirectional wheel through experiments.

Keywords

Holonomic mobile robotWheel friction modelOmnidirectional wheelsWheel slippage
Type
Article
Information
Robotica , Volume 39 , Issue 9 , September 2021 , pp. 1654 - 1673
Copyright
© The Author(s), 2021. Published by Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Tadakuma, K. and Tadakuma, R., “Mechanical Design of “Omni-Ball”: Spherical Wheel for Holonomic Omnidirectional Motion,” In: Proceedings of the 3rd Annual IEEE Conference on Automation Science and Engineering (2007) pp. 788–794.Google Scholar
Han, K.-L., Choi, A.-K., Kim, J., Kim, H. and Lee, J. S., “Design and Control of Mobile Robot with Mecanum Wheel,” In: ICROS-SICE International Joint Conference (2009) pp. 2932–2937.Google Scholar
Ishida, S. and Miyamoto, H., “Ball Wheel Drive Mechanism for Holonomic Omnidirectional Vehicle,” In: World Automation Congress (2010).Google Scholar
Al Mamun, M. A., Nasir, M. T. and Khayyat, A., “Embedded system for motion control of an omnidirectional mobile robot,” IEEE Access 6, 6722–6739 (2018).CrossRefGoogle Scholar
Li, Z., Yang, C., Su, C.-Y., Deng, J. and Zhang, W., “Vision-based model predictive control for steering of a nonholonomic mobile robot,” IEEE Trans Control Syst Technol. 24(2), 553–564 (2016).Google Scholar
Oftadeh, R., Aref, M. M., Ghabcheloo, R. and Mattila, J., “Mechatronic design of a four-wheel steering mobile robot with fault-tolerant odometry feedback,” In: 6th IFAC Symposium on Mechatronic Systems (2013) pp. 663–669.Google Scholar
Yi, J., Wang, H., Zhang, J., Song, D., Jayasuriya, S. and Liu, J., “Kinematic modeling and analysis of skid-steered mobile robots with applications to low-cost inertial-measurement-unit-based motion estimation,” IEEE Trans Robot. 25(5), 1087–1097 (2009).Google Scholar
Tian, Y. and Sarkar, N., “Control of a mobile robot subject to wheel slip,” J Intell Robot Syst. 74(3–4), 915–929 (2014).CrossRefGoogle Scholar
Jetto, L., Longhi, S. and Vitali, D., “Localization of a wheeled mobile robot by sensor data fusion based on a fuzzy logic adapted kalman filter,” In: IFAC Intelligent Autonomous Vehicles (1998), pp. 213–218.Google Scholar
Ganganath, N. and Leung, H., “Mobile robot localization using odometry and kinect sensor,” In: IEEE International Conference on Emerging Signal Processing Applications (2012), pp. 91–94.Google Scholar
Marin, L., Valles, M., Soriano, A., Valera, A. and Albertos, P., “Event-based localization in Ackermann steering limited resource mobile robots,” IEEE/ASME Trans Mech. 19(4), 1171–1182 (2014).CrossRefGoogle Scholar
Peela, H., Luo, S., Cohn, A. G. and Fuentes, R., “Localisation of a mobile robot for bridge bearing inspection,” Autom Constr. 94, 244–256 (2018).CrossRefGoogle Scholar
Iagnemma, K. and Ward, C. C., “Classification-based wheel slip detection and detector fusion for mobile robots on outdoor terrain,” Autonomous Robot. 26(1), 33–46 (2009).CrossRefGoogle Scholar
Erdogan, G., Alexander, L. and Rajamani, R., “Estimation of tire-road friction coefficient using a novel wireless piezoelectric tire sensor,” IEEE Sens J. 11(2), 267–279 (2011).CrossRefGoogle Scholar
Rath, J. J., Veluvolu, K. C. and Defoort, M., “Simultaneous estimation of road profile and tire road friction for automotive vehicle,” IEEE Trans Veh Technol. 64(10), 4461–4471 (2015).CrossRefGoogle Scholar
Madhusudhanan, A. K., Corno, M., Arat, M. A. and Holweg, E., “Load sensing bearing based road-tyre friction estimation considering combined tyre slip,” Mechatronics 39, 136–146 (2016).CrossRefGoogle Scholar
Liu, Y.-H., Li, T., Yang, Y.-Y., Ji, X.-W. and Wu, J., “Estimation of tire-road friction coefficient based on combined APF-IEKF and iteration algorithm,” Mech Syst Signal Process. 88, 25–35 (2017).CrossRefGoogle Scholar
Li, L., Wang, F.-Y. and Zhou, Q., “Integrated longitudinal and lateral tire/road friction modeling and monitoring for vehicle motion control,” IEEE Trans Intell Transp Syst. 7(1), 1–19 (2006).CrossRefGoogle Scholar
Balakrishna, R. and Ghosal, A., “Modeling of slip for wheeled mobile robots,” lEEE Trans Robot Autom. 11(1), 126–132 (1995).CrossRefGoogle Scholar
Williams, R. L., Carter, B. E., Gallina, P. and Rosati, G., “Dynamic model with slip for wheeled omnidirectional robots,” IEEE Trans Robot Autom. 18(3), 285–293 (2002).CrossRefGoogle Scholar
Wong, J. Y., Theory of Ground Vehicles (John Wiley & Sons, NY, USA, 3rd Edition, 2001).Google Scholar
Rajamani, R., Vehicle Dynamics and Control (Springer, NY, USA, 2006).Google Scholar
Pacejka, H., Tire and Vehicle Dynamics (Butterworth-Heinemann, Oxford, UK, 3rd Edition, 2012).Google Scholar
Canudas-de-Wit, C., Tsiotras, P., Velenis, E., Basset, M. and Gissinger, G., “Dynamic friction models for road/tire longitudinal interaction,” Vehicle System Dynamics 39, 189–226 (2003).CrossRefGoogle Scholar
Clover, C. L. and Bernard, J. E., “Longitudinal tire dynamics,” Veh Syst Dyn. 29, 231–259 (1998).CrossRefGoogle Scholar
Dahl, P. R., “A solid friction model,” The Aerospace Corporation (1968).CrossRefGoogle Scholar
Canudas-de-Wit, C. and Tsiotras, P., “Dynamic tire friction models for vehicle traction control,” In: Proceedings of the 38th IEEE Conference on Decision and Control (1999) pp. 3746–3751.Google Scholar