Abstract
Nickel-zinc ferrite nanopowders Ni0.4Zn0.6Fe2O4 were prepared by glycine (G)–nitrate (N) solution-combustion synthesis and the influence of G/N ratio on their chemical composition, morphology, structure, crystallite size, and magnetic behavior was characterized by XRD, EDX, SEM, FTIR spectroscopy, and vibration magnetometry. According to XRD data, the formation of Ni–Zn ferrite gets started at G/N = 0.4. The observed influence of G/N ratio on the structural and magnetic parameters of Ni–Zn ferrites opens up a route to producing powders with crystallite size D in the range 24.6–47.1 nm, extent of conversion α up to 94%, coercive force Hc from 7.88 to71.78 Oe, remanence magnetization Mr from 2.42 to 31.81 emu/g, and saturation magnetization Ms from 51.06 to 90.66 emu/g. The maximum values of magnetic characteristics were reached at a stoichiometric ratio of glycine to nitrogen in nitrates (G/N = 0.6).
Similar content being viewed by others
REFERENCES
Nguyen, Y.M., Lopez, T., Laur, J.-P., Bourrier, D., Charlot, S., Nava, Z.V., Bley, V., Combettes, C., and Brunet, M., Soft ferrite cores characterization for integrated micro-inductors, J. Phys.: Conf. Ser., 2013, vol. 476, 012139. https://doi.org/10.1088/1742-6596/476/1/012139
Ozgur, U., Alivov, Y., and Morkoc, H., Microwave ferrites: 2. Passive components and electrical tuning, J. Mater. Sci.: Mater. Electron., 2009, vol. 20, pp. 911–952. https://doi.org/10.1007/s10854-009-9924-1
Dyachenko, S.V., Vaseshenkova, M.A., Martinson, K.D., Cherepkova, I.A., and Zhernovoi, A.I., Synthesis and properties of magnetic fluids produced on the basis of magnetic particles, Russ. J. Appl. Chem., 2016, vol. 89, no. 5, pp. 690–696. https://doi.org/10.1134/S1070427216050025
Hernandez, P.T., Kuznetsov, M.V., and Morozov, Yu.G., High-temperature synthesis of nickel-based nanoparticles for use as materials in sensors of potentially hazardous gases, Int. J. Self-Propag. High-Temp. Synth., 2019, vol. 28, no. 3, pp. 159–172. https://doi.org/10.3103/S1061386219030063
Martinson, K.D., Kozyritskaya, S.S., Panteleev, I.B., and Popkov, V.I., Low coercivity microwave ceramics based on LiZnMn ferrite synthesized via glycine–nitrate combustion, Nanosystems: Phys. Chem. Math., 2019, vol. 10, no. 3, pp. 313–317. https://doi.org/10.17586/2220-8054-2019-10-3-313-317
Kulkarni, A.B. and Mathad, S.N., Synthesis and structural analysis of Co–Zn–Cd ferrite by Williamson–Hall and size–strain plot methods, Int. J. Self-Propag. High-Temp. Synth., 2018, vol. 27, no. 1, pp. 37–43. https://doi.org/10.3103/S106138621801003X
Gomes, G.A., Costa, G.L., and Figueiredo, A.B.-H.S., Synthesis of ferrite nanoparticles Cu1–xAgxFe2O4 and evaluation of potential antibacterial activity, J. Mater. Res. Technol., 2018, vol. 7, no. 3, pp. 381–386. https://doi.org/10.1016/j.jmrt.2018.04.021
Reddy, D.H.K. and Yun, Y.-S., Spinel ferrite magnetic adsorbents: Alternative future materials for water purification?, Coord. Chem. Rev., 2016, vol. 315, pp. 90–111. https://doi.org/10.1016/j.ccr.2016.01.012
Raina, O. and Manimekalai, R., Photocatalysis of cobalt zinc ferrite nanorods under solar light, Res. Chem. Intermed., 2018, vol. 44, pp. 5941–5951. https://doi.org/10.1007/s11164-018-3465-2
Martinson, K.D., Kondrashkova, I.S., Omarov, S.O., Sladkovskiy, D.A., Kiselev, A.A., Kiseleva, T.Yu, and Popkov, V.I., Magnetically recoverable catalyst based on porous nanocrystalline HoFeO3 for process on n-hexane conversion, Adv. Powder Technol., 2020, vol. 31, no. 1, pp. 402–408. https://doi.org/10.1016/j.apt.2019.10.033
Teo, M.L.S., Kong L.B., Li, Z.W., Lin, G.Q., and Gan, Y.B., Development of magneto-dielectric materials based on Li-ferrite ceramics: 1. Densification behavior and microstructure development, J. Alloys Compd., 2008, vol. 459, nos. 1–2, pp. 557–566. https://doi.org/10.1016/j.jallcom.2007.05.050
Shirsath, S.E., Kadam, R.H., Gaikwad, A.S., Ghasemi, A., and Morisako, A., Effect of sintering temperature and the particle size on the structural and magnetic properties of nanocrystalline Li0.5Fe2.5O4, J. Magn. Magn. Mater., 2011, vol. 323, no. 23, pp. 3104–3108. https://doi.org/10.1016/j.jmmm.2011.06.065
Martinson, K.D., Cherepkova, I.A., Panteleev, I.B., and Popkov, V.I., Single-step solution-combustion synthesis of magnetically soft NiFe2O4 nanopowders with controllable parameters, Int. J. Self-Propag. High-Temp. Synth., 2019, vol. 28, no. 4, pp. 266–270. https://doi.org/10.3103/S1061386219040101
Lomanova, N.A., Tomkovich, M.V., Sokolov, V.V., Ugolkov, V.L., Panchuk, V.V., Semenov, V.G., Pleshakov, I.V., Volkov, M.P., and Gusarov, V.V., Thermal and magnetic behavior of BiFeO3 nanoparticles prepared by glycine-nitrate combustion, J. Nanopart. Res., 2018, vol. 20, 17. https://doi.org/10.1007/s11051-018-4125-6
Chanadee, T., Combustion synthesis of nickel-ferrite magnetic materials, Int. J. Self-Propag. High-Temp. Synth., 2017, vol. 26, no. 1, pp. 40–43. https://doi.org/10.3103/S1061386217010058
Harris, V.G., Modern microwave ferrites, IEEE Trans. Magn., 2012, vol. 48, pp. 1075–1104. https://doi.org/10.1109/TMAG.2011.2180732
La, P., Lei, W., Wang, X., Wei, Y., and Ma, Y., Effects of excess NaClO4 on phases, size and magnetic properties of Ni–Zn ferrite powders prepared by combustion synthesis, Ceram. Int., 2015, vol. 41, no. 8, pp. 9843–9848. https://doi.org/10.1016/j.ceramint.2015.04.058
Monteiro, E.S., Kasal, R.B., Moraes, N.C., Melo, G.B.M., Santos, J.C.A., and Figueiredo, A.B.-H.S., Nanoparticles of Ni1 – xZnxFe2O4 used as microwave absorbers in the X-band, Mater. Res. Suppl. 1, 2019, vol. 22, no. 1. https://doi.org/10.1590/1980-5373-mr-2019-0188
Zleng, Z., Zhang, H., Yang, Q., and Jia, L., Structure and electromagnetic properties of NiZn spinel ferrite with nano-sized ZnAl2O4 additions, J. Alloys Compd., 2015, vol. 648, pp. 160–167. https://doi.org/10.1016/j.jallcom.2015.06.256
Zhang, Y., Xia, A., Chen, W., and Ma, R., Structural and magnetic properties of hydrothermal spinel Ni0.4Zn0.6Fe2O4 ferrite, Mater. Res., 2015, vol. 18, no. 6. https://doi.org/10.1590/1516-1439.033115
Li, L.-Z., Peng, L., Zhong, X.-X., Wang, R., and Tu, X.-Q., Structural and magnetic properties of strontium substituted NiZn ferrite nanopowders, Ceram. Int., 2016, vol. 42, no. 11, pp. 13 238–13 241. https://doi.org/10.1016/j.ceramint.2016.05.120
Verma, S. and Joy, P.A., High Curie temperature of nanosized NiZn ferrite particles synthesized by a combustion method, Int. J. Nanosci., 2008, vol. 7, no. 1, pp. 43–49. https://doi.org/10.1142/S0219581X08005158
Naderi, P., Masoudpanah, S.M., and Alamolhoda, S., Magnetic properties of Li0.5Fe2.5O4 nanoparticles synthesized by solution combustion method, Appl. Phys. A: Solids Surf., 2017, vol. 123, p. 702. https://doi.org/10.1007/s00339-017-1304-8
Kondrashkova, I.S., Martinson, K.D., Zakharova, N.V., and Popkov, V.I., Synthesis of nanocrystalline HoFeO3 photocatalyst via heat treatment of products of glycine-nitrate combustion, Russ. J. Gen. Chem., 2018, vol. 88, pp. 2465–2471. https://doi.org/10.1134/S1070363218120022
Ilhan, S., Izotova, S.G., and Komlev, A.A., Synthesis and characterization of MgFe2O4 nanoparticles prepared by hydrothermal decomposition of co-precipitated magnesium and iron hydroxides, Ceram. Int., 2015, vol. 41, no. 1, pp. 577–585. https://doi.org/10.1016/j.ceramint.2014.08.106
Dyachenko, S.V., Martinson, K.D., Cherepkova, I.A., and Zhernovoi, A.I., Particle size, morphology, and properties of transition metal ferrospinels of the MFe2O4 (M = Co, Ni, Zn) type produced by glycine-nitrate combustion, Russ. J. Appl. Chem., 2016, vol. 89, pp. 535–539. https://doi.org/10.1134/S1070427216040029
Anjana, V., John, S., Prakash, P., Nair, A.M., Nair, A.R., Sambhudevan, S., and Shankar, B., Magnetic properties of copper doped nickel ferrite nanoparticles synthesized by Co precipitation method, IOP Conf. Ser.: Mater. Sci. Eng., 2018, vol. 310, 012024. https://doi.org/10.1088/1757-899X/310/1/012024
Martinson, K.D., Panteleev, I.B., Shevchik, A.P., and Popkov, V.I., Effect of the Red/Ox ratio on the structure and magnetic behavior of Li0.5Fe2.5O4 nanocrystals synthesized by solution combustion approach, Lett. Mater., vol. 9, no. 4, pp. 475–479. https://doi.org/10.22226/2410-3535-2019-4-475-479
Funding
This work was financially supported by the Russian Foundation for Basic Research (project no. 20-03-00976).
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
Martinson, K.D., Sakhno, D.D., Belyak, V.E. et al. Ni0.4Zn0.6Fe2O4 Nanopowders by Solution-Combustion Synthesis: Influence of Red/Ox Ratio on their Morphology, Structure, and Magnetic Properties. Int. J Self-Propag. High-Temp. Synth. 29, 202–207 (2020). https://doi.org/10.3103/S106138622004007X
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S106138622004007X