Abstract—
This paper presents an analysis of changes in the mechanical properties of the EI-961Sh alloy under operation and the causes of fracture of the inlet guide vane blades. It is shown that early diagnostics and monitoring increase the performance reliability of the components of gas compressor units.
Similar content being viewed by others
REFERENCES
Kryukov, I.I., Andreev, P.A., Moshnikov, A.V., and Ivanov, S.A., Inspection of the technical condition, detection according to the value of mechanical damage and vibration monitoring of the natural frequencies of the working blades of GPA GTK-10-4 axial compressor, Gazoturb. Tekhnol., 2013, no. 3, p. 26.
Skudnov, V.A. and Chegurov, M.K., Relaksatsiya napryazhenii v metallakh i splavakh (Stress Relaxation in Metals and Alloys), Nizh. Novgorod: NGTU, 2010.
Madyanov, S.A., Kraev, A.P., Nokhrin, A.V., Mel’nikov, G.Yu., Gruntenko, G.S., Nikityuk, V.M., and Chuvil’deev, V.N., The method of determining the technical condition of materials of structural elements, RF Patent no. 2204817.
Zubchenko, A.S., Koloskov, M.M., Kashirskii, Yu.V., et al., Marochnik stalei i splavov (Steel and Alloy Grade Catalogue), Zubchenko, A.S., Ed., 2nd ed., Moscow: Mashinostroenie, 2003, p. 784.
Fridman, Ya.B., Analiz i stroenie izlomov (Analysis and Structure of Fractures), Moscow: Mashgiz, 1960.
Chegurov, M.K. and Sorokina, S.A., Osnovy fraktograficheskogo analiza izlomov obraztsov iz konstruktsionnykh splavov: ucheb. posobie (Fundamentals of Fractographic Analysis of Fractures of Samples from Structural Alloys, The School-Book), Nizh. Novgorod: Nizhegor. Gos. Tekh. Univ. im. R.E. Alekseeva, 2018.
Tarasenko, Yu.P., Berdnik, O.B., and Tsareva, I.N., Post-operation state and extension of service life of compressor blased of the gas-turbine power plant GTE-45-3, Vestn. Samar. Aerokosm. Univ., 2014, no. 4 (46), p. 74.
Tsareva, I.N., Berdnik, O.B., and Kirikov, S.V., Analysis of the condition of the material of compressor blades after prolonged use, in Materialy dokladov 4-oi Mezhdunarodnoi nauchno-tekhnicheskoi konferentsii, posvya-shchennaya 80-letiyu IMASh RAN “Zhivuchest’ i konstruktsionnoe materialovedenie ZhivKoM, 2018 (Proceedings of the 4th International Conference on Survivability and Structural Materials Science, 2018).
Tsareva, I.N., Kirikov, S.V., Berdnik, O.B., Krivina, L.A., and Tarasenko, Yu.P., Use of microanalysis methods in turbine blased' diagnostics in the production process, AIP Conf. Proc.
OST (Union Standard) No. 108.020.03-82, Blanks for turbine and compressor blades are stamped, freely forged and rolled from corrosion-resistant and heat-resistant steel, general technical conditions.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflict of interest.
Additional information
Translated by N. Bogacheva
About this article
Cite this article
Chegurov, M.K., Berdnik, O.B. Fracture of Blade Material under Long-Term Operation. J. Mach. Manuf. Reliab. 49, 646–651 (2020). https://doi.org/10.3103/S1052618820070055
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618820070055