Abstract
The thermal resistance of a semiconductor device determines the limiting thermal regime that guarantees its operability: the higher the thermal resistance of a semiconductor device the larger its overheating can be. Therefore, the thermal resistances of commercial devices must be controlled. At present, the method for determining the junction-to-case thermal resistance using the structure functions of the differential and integral (cumulative) thermal capacitance is widely used. The heat flow function, a new thermal characteristic proposed in this work, allows us to determine the instant of time at which the heat front reaches the heat sink. In this case, the inflection point of the heat flow function corresponds to the junction-to-case thermal resistance found using a similar method. The cumulative thermal capacitance is determined from the heat balance equation. The structure functions are determined analytically without the numerical deconvolution procedure. Comparison of the proposed method with the well-known methods that use the structure functions show that, at the same values of parameters, the processing of the results is easier, the measurement time is shorter, and strict requirements for heat removal are not imposed. The proposed method can be used to compare the designs of devices and analyze defects in the thermal resistance of finished devices.
Similar content being viewed by others
REFERENCES
Székely, V. and van Bien, T., Fine structure of heat flow path in semiconductor devices: measurement and identification method, Solid-State Electron., 1988, vol. 31, no. 9, pp. 1363–1368.
Dai, J., Li, J., Agyakwa, P., et al., Comparative thermal and structural characterization of sintered nano-silver and high-lead solder die attachment during power cycling, IEEE Trans. Device Mater. Reliab., 2018, vol. 18, no. 2, pp. 256–265.
Poppe, A. and Szekely, V., Dynamic temperature measurements: tools providing a look into package and mount structures, Electron. Cooling, 2002, vol. 8, pp. 10–19.
Szekely, V., Identification of RC networks by deconvolution: chances and limits, IEEE Trans. Circuits Syst. I. Theory Appl., 1998, vol. 45, no. 3, pp. 244–258.
Szabo, P., Steffens, O., Lenz, M., and Farkas, G., Transient junction-to-case thermal resistance measurement methodology of high accuracy and high repeatability, IEEE Trans. Compon. Packing Technol., 2005, vol. 28, no. 4, pp. 630–636.
Schweitzer, D., Pape, H., and Chen, L., Transient measurement of the junction-to-case thermal resistance using structure functions: chances and limits, in Proceedings of the 24th SEMITHERM Conference, San Jose, 2008, pp. 193–199.
Schweitzer, D., Software TDIM-MASTER: Program for the Evaluation of Transient Dual Interface Measurements of Rth-JC. http://www.jedec.org. Accessed June 20, 2018.
JESD51-14. Transient dual interface test method for the measurement of the thermal resistance junction-to-case of semiconductor devices with heat flow through a single path, 2011. www.jedec.org/committees/JC-15. Accessed June 20, 2018.
T3Ster®—Dynamic Thermal Characterization. http://www.mentor.com/products/mechanical/products/t3ster/. Accessed June 20, 2018.
Szekely, V., Rencz, M., Torok, S., and Ress, S., Calculating effective board parameters from transient measurements, IEEE Trans. Compon. Packing Technol., 2002, vol. 24, no. 4, pp. 605–610.
Evdokimova, N.L., Dolgov, V.V., and Motorin, A.Yu., Definition of heat conductivity of the materials used in production of semiconductor devices, Electron. Engin. Ser. 2. Semicond. Devices, 2017, no. 1 (244), pp. 45–52.
Lenz, M., Striedl, G., and Fröhler, U., Thermal Resistance Theory and Practice, Special Subject Book, 2000. http://www.infineon.com. Accessed June 20, 2018.
Evdokimova, N.L., Ezhov, V.S., and Minin, V.F., Electron. Engin. Ser. 2. Semicond. Devices, 2013, no. 1 (230), pp. 67–75.
Evdokimova, N.L., Ezhov, V.S., and Ivanov, K.A., Analytical thermal structure function. Numerical modeling, Electron. Engin. Ser. 2. Semicond. Devices, 2015, no. 1 (235), pp. 27‒35.
OST 110944-96. Integrated circuits and semiconductor devices. Methods of calculation, measurement and control of thermal resistance, 1997.
AliceFlow_v0_34, registration number no. 2013660267. https://github.com/kirill7785/algebraic-multigrid-method. Accessed June 20, 2018.
ACKNOWLEDGMENTS
The authors thank Yu.A. Kontsevoy, V.S. Ezhov, and A.Yu. Motorin (J&C “S&PE “Pulsar”, Moscow) for discussing the results.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by E. Bondareva
Rights and permissions
About this article
Cite this article
Evdokimova, N.L., Dolgov, V.V. & Ivanov, K.A. Determining the Junction-to-Case Thermal Resistance of a Semiconductor Device from Its Cooling Curve. Russ Microelectron 49, 494–500 (2020). https://doi.org/10.1134/S1063739720070021
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1063739720070021