Issue 5, 2021

Production of jet-fuel-range molecules from biomass-derived mixed acids

Abstract

Biomass has received considerable attention as a feedstock for the replacement of crude oil for producing both energy and high-value chemicals. In this work, we use a combination of chemical and biological processing to produce long-chain linear and branched ketones with low oxygen content. A mixture of medium-chain-length carboxylic acids was obtained by methane-inhibited, open-culture anaerobic fermentation of lignocellulosic biomass, and this mixture was further oligomerized using heterogeneous chemical catalysis. The products fall in the range of C10–C20 molecules that can potentially be blended with existing hydrocarbon jet fuels. We used a Pd/CeZrOx catalyst to achieve >90% yield to C11+ ketones starting from C2–C4 mixed acids. The acids are first recovered from the fermentation broth as ethyl esters by reactive distillation using Amberlyst-45 as a catalyst. We evaluated the activity of several bifunctional catalysts for upgrading these ethyl esters into long-chain ketones, finding that 0.25 wt% Pd/CeZrOx was most active. Using a combination of experimental reaction kinetics measurements and gas-phase thermodynamics calculations, we postulate a reaction network that explains the production of the most abundant products via a combination of direct ester ketonization, dehydration, and hydrogenation.

Graphical abstract: Production of jet-fuel-range molecules from biomass-derived mixed acids

Supplementary files

Article information

Article type
Paper
Submitted
16 Oct 2020
Accepted
21 Jan 2021
First published
21 Jan 2021

React. Chem. Eng., 2021,6, 845-857

Author version available

Production of jet-fuel-range molecules from biomass-derived mixed acids

E. Jamalzade, K. Kashkooli, L. Griffin, G. P. van Walsum and T. J. Schwartz, React. Chem. Eng., 2021, 6, 845 DOI: 10.1039/D0RE00401D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements