The specifics of forming and operating the electrodes of slag-cleaning electric furnaces of the Nadezhdinsk Metallurgical Plant have been studied. It was found that the main factors causing electrode breaks include significant fluctuations of the molten pool level and underroof space temperatures of the furnaces.
Similar content being viewed by others
References
R. V. Starykh and L. V. Krupnov, “Practical solutions within the cycle of pyrometallurgical processing of sulfide concentrates at the Nadezhdinsk Metallurgical Plant,” Tsvetnaya Metallurgiya, No. 2, 44–47 (2013).
H. Roos, Thermomechanical Analysis of Raw Materials Used in the Production of Soderberg Electrode Paste, MS thesis, North-West University (2011).
B. Larsen, J. P. M. Amaro, S. Z. Nascimento, et al., “Melting and densification of electrode paste briquettes in Soderberg electrodes,” Proc. 10th Int. Ferroalloys Cong. INFACON X: “Transformation through Technology”, Cape Town, South Africa, Feb. 1–4 (2004) (2004), pp. 405–417.
R. J. Ord, J. G. Schofield, and C. G. Tan, “Improved performance of Soderberg electrodes,” CIM Bulletin, 88, 97–101 (1995).
R. A. Innvaer, “Status for the Soderberg smelting electrodes,” in: UIE, Electrotech’92, Montreal, North America (1992), pp. 1–10.
J. P. Beukes, H. Roos, L. Shoko, et al., “The use of thermomechanical analysis to characterize Soderberg electrode paste raw materials,” Min. Eng., 46–47, 167–176 (2013).
R. Innvaer, K. Fidje, and K. Kalgraf, “Expert system for Soderberg Electrodes,” INFACON 7, Trondheim, Norway (1995), pp. 555–564.
R. Innvaer and L. Olsen, “Calculation of thermal stresses in Soderberg electrodes,” in: UIE 9, Paris, France (1980), pp. 36–47.
M. I. Gasik, Self-annealing Electrodes of Ore-smelting Electric Furnaces [in Russian], Metallurgiya, Moscow (1976).
J. Bullón and A. Pérez, “Carbon analysis at FERROATLÁNTICA I+D,” INFACON XI, New Delhi, India (2007), pp. 769–778.
K. L. Hulse, Anode Production: Raw Materials, Composition and Process Parameters [in Russian], translated from English, ed. by P. V. Polyakov, Classic Center, Krasnoyarsk (2004).
V. V. Karchakova, M. A. Solovyov, and V. M. Shmal’ko, “The use of the coal sinterability and sintering properties determination method for coal pitch and carbonaceous filler characterization,” Uglekhimicheskii Zhurnal, No. 3-4, 69–73 (2013).
E. A. Yanko, Anodes of Aluminum Electrolyzers [in Russian], Ruda i Metally, Moscow (2001).
Ye. I. Andreyikov, “Carbon material stock based on the products of coke chemistry and thermal dissolution of coals. Chemistry for sustainable development,” Izd. Sibirsk. Otd. RAN, Novosibirsk, 24, No. 3, 317–323 (2016).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, Vol. 64, No. 9, pp. 71–76, September, 2020.
Rights and permissions
About this article
Cite this article
Starykh, R.V., Vystupov, S.I., Krupnov, L.V. et al. Specifics of Forming and Operating Self-Sintering Electrodes of Slag-Cleaning Electric Furnaces of Nadezhdinsk Metallurgical Plant. Metallurgist 64, 931–939 (2021). https://doi.org/10.1007/s11015-021-01074-4
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-021-01074-4