Redistribution of carbon and other elements, and formation of the structure, composition, and properties of low-carbon Nb, Nb–Ti, Nb–V, Nb–V–Mo and Ti–Mo microalloyed steels during hot rolling is studied using metal of five laboratory melts. It is established that by selecting the temperature for the beginning of rolling in the finishing group of stands according to steel composition (microalloying system) it is possible to achieve a significant improvement in the homogeneity of the composition, structure, and set of rolled product properties. Therefore, it is demonstrated by experiment that chemical and structural heterogeneity of metal formed in the billet casting stage may be largely eliminated during hot rolling on the basis of controlling carbide (carbonitride) precipitate formation.
Similar content being viewed by others
References
A. I. Zaitsev, “Prospective directions for development of metallurgy and materials science of steel,” Pure and Applied Chemistry, 89, No. 10, 1553–1565 (2017).
C. Lesch, N. Kwiaton, and F. B. Klose, “Advanced high strength steels (AHSS) for automotive applications — tailored properties by smart microstructural adjustments,” Steel Research Int., 88, 1700210 (2017).
N. Fonstein, Advanced High Strength Sheet Steels, Springer Int. Publishing, Switzerland (2015).
Y. Funakawa, T. Shiozaki, K. Tomita, T. Yamamoto, and E. Maeda, “Development of high strength hot-rolled sheet steel consisting of ferrite and nanometer-sized carbides,” ISIJ Int., 44, 1945–1951 (2004).
K. Seto, Y. Funakawa, and S. Kaneko, “Hot rolling high strength steels for suspension and chassis parts “NANOHITEN” and “BTH steels” JFE Technical Report, No. 10, 19–25 (2007).
X. Mao, X. Huo, X. Sun, and Y. Chai, “Strengthening mechanisms of a new 700 MPa hot rolled Ti-microalloyed steel produced by compact strip production,” J. of Mater. Proc. Techn., 210, 1660–1666 (2010).
A. V. Koldaev, A. I. Zaitsev, I. A. Krasnyanskaya, and D. L. D’yakonov, “Study of the effect of composition and thermal deformation treatment parameters on the properties of austenitic steels microalloyed with titanium and molybdenum. Part 2. Phase precipitate characteristics,” Metallurg, No. 6, 60–70 (2019).
A. V. Koldaev, A. I. Zaitsev, I. A. Krasnyanskaya, and D. L. D’yakonov, “Study of the effect of composition and thermal deformation treatment parameters on the properties of austenitic steels microalloyed with titanium and molybdenum. Part 1. Microstructure characteristics,” Metallurg, No. 5, 55–61 (2019).
Y. Funakawa and K. Seto, “Coarsening behavior of nanometer sized carbides in hot-rolled high strength sheet steel,” Mater. Sci. Forum, 539–543, 4813–4818 (2007).
Z. Jia, R. D. K. Misra, R. O’Malley, and S. J. Jansto, “Fine-scale precipitation and mechanical properties of thin slab processed titanium–niobium bearing high strength steels,” Mater. Sci. and Eng. A, 528, No. 22, 7077–7083.
F. Z. Bu, X. M. Wang, S. W. Yang, C. J. Shang, and R. D. K. Misra, “Contribution of interphase precipitation on yield strength in thermomechanically simulated Ti–Nb and Ti–Nb–Mo microalloyed steels,” Mater. Sci. and Eng. A, 620, 22–29 (2014).
C. Y. Chen, H. W. Yen, F. H. Kao, W. C. Li, C. Y. Huang, J. R. Yang, and S. H. Wang, “Precipitation hardening of high-strength low-alloy steels by nanometer-sized carbides,” Mater. Sci. and Eng. A, 499, 162–166 (2009).
A. I. Zaitsev, A. V. Koldaev, N. A. Arutyunyan, B. M. Mogutnov, and S. F. Dunaev, “New generation of economically alloyed ferritic steels with a unique set of properties that are difficult to combine,” Probl. Chern. Met. Mater., No. 2, 77–86 (2019).
K. Frisk and U. Borggren, “Precipitation in microalloyed steel by model alloy experiment and thermodynamic calculation,” Metall. and Mater. Trans A, 48A, 4806–4817 (2016).
G. Larzabal, N. Isasti, J. M. Rodriguez-Ibabe, and P. Uranga, “Evaluating strengthening and impact toughness mechanisms for ferritic and bainitic microstructures in Nb, Nb–Mo and Ti–Mo microalloyed steels,” Metals, 7, 65 (2017).
N. Kamikawa, K. Sato, G. Miyamoto, M. Murayama, N. Sekido, K. Tsuzakie, and T. Furuhara, “Stress–strain behavior of ferrite and bainite with nano-precipitation in low carbon steels,” Acta Materialia, 83, 383–396 (2015).
X. Deng, T. Fu, Z. Wang, G. Liu, G. Wang, and R. D. K. Misra, “Extending the boundaries of mechanical properties of Ti–Nb low carbon steel via combination of ultrafast cooling and deformation during austenite-to-ferrite transformation,” Met. Mater. Int., 23, No. 1, 175–183 (2017).
A. Rijkenberg, A. Blowey, P. Bellina, and C. Wooffindin, “Advanced high stretch-flange formability steels for chassis & suspension applications,” SCT2014 (4th Int. Conf. on Steels in Cars and Trucks), 15–19 June 2014, Braunschweig, Germany.
A. I., Zaitsev, A. V. Koldaev, N. A. Karamysheva, and I. G. Rodionova, “Mechanisms for improving chemical and structural homogeneity of hot-rolled product for objects prepared by hot stamping,” Metallurgist, 59, No. 11, 1086–1095 (2016).
A. I. Zaitsev, K. L. Kosyrev, and I. G. Rodionova, “Contemporary trends in the development of metallurgical technology for achieving a good set of steel service properties and quality indices,” Probl. Chern. Met. Mater., No. 3, 5–13 (2012).
A. I. Zaitsev, N. G. Shaposhnikov, I. G. Rodionova, and A. A. Pavlov, “Thermodynamic development of austenite-martensite class corrosion-resistant steels intended for a bimetal cladding layer,” Metallurgist, 59, 1195–1120 (2015).
N. G. Shaposhnikov, B. M. Mogutnov, S. M. Polonskaya, A. P. Kolesnichenko, and P. B. Belyavskii, “Thermodynamic modeling as a tool for improving heating technology for ingots of steels 12Kh18N10T for rolling,” Materialoved., No. 11, 2–9 (2004).
A. I. Zaitsev, I. G. Rodionova, N. G. Shaposhnikov, B. M. Mogutnov, S. F. Dunaev, P. A. Mishnev, and R. R. Adigamov, “Development f scientific bases for effective production technology of cold-rolled high-strength low-alloy steel by controlling the type, amount, and morphology of nonmetallic excess phase precipitates,” Probl. Chern. Met Materialovedeniya, No. 1, 75–85 (2012).
N. G. Shaposhnikov, A. V. Koldaev, A. I. Zaitsev, I. G. Rodionova, D. L. D’yakonov, and N. A. Arutyunyan, “Regularities of titanium carbide precipitation in low carbon Ti–Mo microalloyed high strength steels,” Metallurgist, 60, No. 8, 810–816 (2016).
A. V. Koldaev, F. V. Arifulov, A. I. Zaitsev, N. A. Arutyunyan, and N. M. Aleksandrova, “Effect of excess phase precipitates on structural steel strengthening prepared by hot stamping,” Metallurg, No. 5, 50–55 (2020).
A. V. Koldaev, D. L. D’yakonov, A. I. Zaitsev, and N. A. Arutyunyan, “Kinetics of the formation of nanosize niobium carbonitride precipitates in low-alloy structural steels,” Metallurgist, 60, No. 9, 1032–1037 (2017).
W. B. Lee, S. G. Hong, C. G. Park, K. H. Kim, and S. H. Park, “Influence of Mo on precipitation hardening in hot rolled HSLA steels containing Nb,” Scripta Mater., 43, 319–324 (2000).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, Vol. 64, No. 10, pp. 19–27, October, 2020.
Rights and permissions
About this article
Cite this article
Zaitsev, A.I., Rodionova, I.G., Koldaev, A.V. et al. Study of Conditions for Improving Chemical and Structural Homogeneity of Ferritic Class Hot-Rolled Steels. Metallurgist 64, 997–1007 (2021). https://doi.org/10.1007/s11015-021-01081-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-021-01081-5