Abstract
To improve the high-temperature resistance of the key hot-end parts of the steam turbine, NiCoCrAlY coatings were deposited on a 304 stainless steel substrate by laser cladding. The microstructure and high-temperature oxidation behavior of the NiCoCrAlY coatings were analyzed. The results showed that the NiCoCrAlY coatings contained γ/γ′ and β phases, and the microstructure was mainly composed of elongated columnar crystals. In addition, after 100 h of oxidation at three different oxidation temperatures (750, 850 and 950 °C), the coatings showed a relatively low oxidation rate, which was approximately a quarter of the oxidation rate of the substrate. At the same time, the protective Cr2O3 scales were formed on the coating surface. When the oxidation temperature was 850 °C, the FeCr2O4 spinel formed and internal oxidation zone appeared, when the oxidation temperature reached 950 °C, the FeCr2O4 spinel gathered in the local area on the surface of the Cr2O3 scale and the internal oxidation was aggravated. In other words, as the oxidation temperature increased, the Fe element in the matrix formed the FeCr2O4 spinel, which accelerated the consumption of Cr element in the coatings and reduced the overall oxidation resistance of the NiCoCrAlY coatings.
Graphic Abstract
Similar content being viewed by others
Data Availability
The raw/processed data required to reproduce these findings cannot be shared at this time as the data also forms part of an ongoing study.
References
H. Wärner, M. Calmunger, G. Chai, J. Polák, R. Petráš, M. Heczko, T. Kruml, S. Johansson, J. Moverare, Procedia Struct. Integr. 13, 843–848 (2018)
Q.Z. Cui, S.M. Seo, Y.S. Yoo, Z. Lu, S.W. Myoung, Y.G. Jung, U. Paik, Surf. Coat. Technol. 284, 69–74 (2015)
W. Uczak de Goes, N. Markocsan, M. Gupta, R. Vaßen, T. Matsushita, K. Illkova, Surf. Coat. Technol. 396, 125950 (2020)
V.K. Tolpygo, D.R. Clarke, Acta Mater. 52, 5115–5127 (2004)
I. Gurrappa, A. SambasivaRao, Surf. Coat. Technol. 201, 3016–3029 (2006)
U. Schulz, C. Leyens, K. Fritscher, M. Peters, B. Saruhan-Brings, O. Lavigne, J.M. Dorvaux, M. Poulain, R. Mévrel, M. Caliez, Aerosp. Sci. Technol. 7, 73–80 (2003)
E. Hejrani, D. Sebold, W.J. Nowak, G. Mauer, D. Naumenko, R. Vaßen, W.J. Quadakkers, Surf. Coat. Technol. 313, 191–201 (2017)
A. Feizabadi, M. SalehiDoolabi, S.K. Sadrnezhaad, M. Rezaei, J. Alloys Compd. 746, 509–519 (2018)
B.Y. Zhang, G.J. Yang, C.X. Li, C.J. Li, Appl. Surf. Sci. 406, 99–109 (2017)
Y.J. Xie, M.C. Wang, Surf. Coat. Technol. 201, 3564–3570 (2006)
G. Mauer, M.O. Jarligo, D.E. Mack, R. Vaßen, J. Therm. Spray Technol. 22, 646–658 (2013)
P. Song, D. Naumenko, R. Vassen, L. Singheiser, W.J. Quadakkers, Surf. Coat. Technol. 221, 207–213 (2013)
P. Richer, M. Yandouzi, L. Beauvais, B. Jodoin, Surf. Coat. Technol. 204, 3962–3974 (2010)
C. Bezençon, A. Schnell, W. Kurz, Scr. Mater. 49, 705–709 (2003)
Y.N. Wu, G. Zhang, Z.C. Feng, B.C. Zhang, Y. Liang, F.J. Liu, Surf. Coat. Technol. 138, 56–60 (2001)
Y.X. Li, P.F. Zhang, P.K. Bai, L.Y. Wu, B. Liu, Z.Y. Zhao, Surf. Coat. Technol. 334, 142–149 (2018)
Y.X. Li, K.Q. Su, P.K. Bai, L.Y. Wu, Mater. Charact. 159, 110023 (2020)
J.C. Pereira, J.C. Zambrano, M.J. Tobar, A. Yañez, V. Amigó, Surf. Coat. Technol. 270, 243–248 (2015)
K. Partes, C. Giolli, F. Borgioli, U. Bardi, T. Seefeld, F. Vollertsen, Surf. Coat. Technol. 202, 2208–2213 (2008)
H.M. Wang, J.S. Jiang, Z.Y. Huang, Y. Chen, K. Liu, Z.W. Lu, J.Q. Qi, F. Li, D.W. He, T.C. Lu, Q.Y. Wang, J. Alloys Compd. 671, 527–531 (2016)
N.M. Martyak, K. Drake, J. Alloys Compd. 312, 30–40 (2000)
C. Kaplin, M. Brochu, Appl. Surf. Sci. 301, 258–263 (2014)
L. Luo, H. Zhang, Y. Chen, C. Zhao, S. Alavi, F. Guo, X. Zhao, P. Xiao, Corros. Sci. 145, 262–270 (2018)
H. Barekatain, S.M. MousaviKhoei, Surf. Coat. Technol. 384, 125339 (2020)
C. Wagner, Corros. Sci. 9, 91–109 (1969)
L.Z. Du, W.T. Zhang, W.G. Zhang, T.T. Zhang, H. Lan, C.B. Huang, Surf. Coat. Technol. 298, 7–14 (2016)
S. Cui, Q. Miao, W. Liang, B. Li, Appl. Surf. Sci. 428, 781–787 (2018)
H.J. Xie, Y.L. Cheng, S.X. Li, J.H. Cao, L. Cao, Trans. Nonferrous Met. Soc. China (English Ed) 27, 336–351 (2017)
G. Moskal, D. Niemiec, B. Chmiela, P. Kałamarz, T. Durejko, M. Ziętala, T. Czujko, Surf. Coat. Technol. 387, 125317 (2020)
J.J. Liang, Y.S. Liu, J.G. Li, Y.Z. Zhou, X.F. Sun, J. Mater. Sci. Technol. 35, 344–350 (2019)
H. Peng, H.B. Guo, R. Yao, J. He, S.K. Gong, Vacuum 85, 627–633 (2010)
A.H. Heuer, D.B. Hovis, J.L. Smialek, B. Gleeson, J. Am. Ceram. Soc. 94, 2698 (2011)
J. Cai, C.Z. Gao, P. Lv, C.L. Zhang, Q.F. Guan, J.Z. Lu, X.J. Xu, J. Alloys Compd. 784, 1221–1233 (2019)
Acknowledgements
The authors would like to acknowledge Natural Science Foundation of China (No. U1810112) and Taiyuan Science and Technology Project (No. 170205) for the financial support.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of interests
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Li, Y., Nie, J., Yang, Y. et al. High-Temperature Oxidation Behavior of NiCoCrAlY Coatings Deposited by Laser Cladding on 304 Stainless Steel. Met. Mater. Int. 28, 412–420 (2022). https://doi.org/10.1007/s12540-020-00927-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12540-020-00927-y