Abstract
The boriding process is a branch of materials heating treatments that studies the improvement of the mechanical properties in steels and alloys. Recently, the borided trends have been studied by a selected group of researchers around the world with an interest to divulge the new results on borided materials for different industrial and biomedical applications. The aim of this study is to provide an overview of the historical review of the boriding process using the Bibliometric analysis. In total, 1227 documents in the Scopus database have used the boriding process as keyword with a growth rate of 7.3% every year from 1962 to 2020. The papers were written by around 2434 authors, mainly from Mexico, Turkey, and Poland, representing 37.7% of the total publications analyzed. The data obtained show that the boriding process has been global and fast-growing in the scientific publications of the last ten years.
Graphic Abstract
Similar content being viewed by others
References
Mischler, S and Muñoz, A I, Wear 297 (2013) 1081.
Yamaguchi, Y, Chapter 2. Wear in Tribology of Plastic Materials, Elsevier, United Kingdom, (1990), pp. 93–142.
Fichtl, W, Mater. Des. 2 (1981) 276.
Kulka, M, Current Trends in Boriding: Techniques, Engineerings Materials Series, Springer International Publishing, Cham, Switzerland, (2019), pp. 1-282.
Özbek, I, Konduk, B A, Bindal, C, and Ucisik, A H, Vacuum 65 (2002) 521.
Luo, X and Li, X, Appl. Surf. Sci. 292 (2014) 336–344.
Mischler, S and Munoz, A, Reference Module in Chemistry, Molecular Sciences and Chemical Engineering in Encyclopedia of Interfacial Chemistry, Elsevier, United Kingdom, (2018), pp. 504-514.
Davis, J R, Surface Hardening of Steels Understanding the Basics, ASM International, OH, USA, (2002), pp. 1-350.
Rigney, D A, Naylor, M G S, Divakar, R, and Ives, L K, Mater. Sci. Eng. 81 (1986) 409.
Matuschka, G Von, Carl Hanser Verlag (1980).
Bhushan, B, Modern Tribology Handbook Volume One, CRC Press. USA, (2001), pp. 1–1728.
Campos-Silva, I et al., Defect Diffus. Forum 297–301 (2010) 1284.
García-Léon, R A, Martínez-Trinidad, J, Campos-Silva, I, and Wong-Angel, W, DYNA(Colombia) 87 (2020) 34.
Campos-Silva, I et al., Surf. Coatings Technol. 349 (2018) 986.
Campos-Silva, I E and Rodríguez-Castro, G A, 18—Boriding to Improve the Mechanical Properties and Corrosion Resistance of Steels in Thermochemical Surface Engineering of Steels, Oxford: Woodhead Publishing, (2015), pp. 651–702.
Sánchez Vergara, M E, Campos Silva, I E, and Bautista Godínez, Ö E, Tratamientos Térmicos de la A a la Z, Trillas. Mexico, (2006), pp. 1–131.
Moissan, H, Seances Acad Sci 120 (1895) 74.
Altintaş, A, Sarigün, Y, and Çavdar, U, Rev. Metal. 52 (2016) e073.
Calik, A, ISIJ Int. 53 (2013) 160.
Palombarini, G and Carbucicchio, M, J. Mater. Sci. Lett. 12 (1993) 797.
Martini, C, Palombarini, G, and Carbucicchio, M, J. Mater. Sci. 39 (2004) 933.
Rodríguez-Castro, G, Campos-Silva, I, Chávez-Gutiérrez, E, Martínez-Trinidad, J, Hernández-Sánchez, E, and Torres-Hernández, A, Surf. Coatings Technol. 215 (2013) 291.
Gök, M S, Küçük, Y, Erdoğan, A, Öge, M, Kanca, E, and Günen, A, Surf. Coatings Technol. 328 (2017) 54.
Kunst, H and Schaaber, O, Harterei-Tech. Mitt. 22 (1967) 1.
Van Rompaey, T, Hari Kumar, K C, and Wollants, P, J. Alloys Compd. 334 (2002) 173.
Campos-Silva, I et al., Surf. Coatings Technol. 205 (2010) 403.
Palombarini, G and Carbucicchio, M, J. Mater. Sci. Lett. 3 (1984) 791.
Holmberg, K and Matthews, A, Coatings Tribology, Second Edition: Properties, Mechanisms, Techniques and Applications in Surface Engineering Techniques and Applications in Surface Engineering, Elsevier, United Kingdom, (2009), pp 1-577.
García-León, R A, Martinez-Trinidad, J, Campos-Silva, I, Figueroa-López, U, and Guevara-Morales, A, Mater. Lett. 282 (2021) 128842.
Rodríguez-Castro, G A et al., Surf. Coatings Technol. 307 (2016) 491.
Hernández-Ramírez, E J, Guevara-Morales, A, Figueroa-López, U, and Campos-Silva, I, Mater. Lett. 277 (2020) 128297.
Delgado-Brito, A M et al., Ceram. Int. 45 (2019) 7767.
Aria, M and Cuccurullo, C, J. Informetr. 11 (2017) 959.
Aguillo, I F, Scientometrics 91 (2012) 343.
Hirsch, J E, Proc. Natl. Acad. Sci. 102 (2005) 16569.
Campos, I, Oseguera, J, Figueroa, U, García, J A, Bautista, O, and Kelemenis, G, Mater. Sci. Eng. A 352 (2003) 261.
Campos, I, Bautista, O, Ramírez, G, Islas, M, De La Parra, J, and Zúñiga, L, Appl. Surf. Sci. 243 (2005) 429.
Campos, I, Ramírez, G, Figueroa, U, Martínez, J, and Morales, O, Appl. Surf. Sci. 253 (2007) 3469.
Campos-Silva, I et al., Surf. Coatings Technol. 237 (2013) 402.
Makuch, N, Kulka, M, Dziarski, P, and Przestacki, D, Opt. Lasers Eng. 57 (2014) 64.
Kulka, M and Pertek, A, Appl. Surf. Sci. 214 (2003) 278.
Pertek, A and Kulka, M, Appl. Surf. Sci. 202 (2002) 252.
Keddam, M, Kulka, M, Makuch, N, Pertek, A, and Małdziński, L, Appl. Surf. Sci. 298 (2014) 155.
Kulka, M and Pertek, A, Appl. Surf. Sci. 214 (2003) 161.
Keddam, M and Chentouf, S M, Appl. Surf. Sci. 252 (2005) 393.
Keddam, M, Appl. Surf. Sci. 236 (2004) 451.
Campos-Silva, I, Ortiz-Domínguez, M, Keddam, M, López-Perrusquia, N, Carmona-Vargas, A, and Elías-Espinosa, M, Appl. Surf. Sci. 255 (2009) 9290.
Campos-Silva, I et al., Surf. Eng. 27 (2011) 189.
Kulka, M, Makuch, N, Pertek, A, and Małdziński, L, J. Solid State Chem. 199 (2013) 196.
Kulka, M, Makuch, N, Dziarski, P, Piasecki, A, and Miklaszewski, A, Opt. Laser Technol. 56 (2014) 409.
Kulka, M, Dziarski, P, Makuch, N, Piasecki, A, and Miklaszewski, A, Appl. Surf. Sci. 284 (2013) 757.
Ozbek, I and Bindal, C, Surf. Coatings Technol. 154 (2002) 14.
Ozdemir, O, Omar, M A, Usta, M, Zeytin, S, Bindal, C, and Ucisik, A H, Vacuum 83 (2008) 175.
Sen, S, Sen, U, and Bindal, C, Surf. Coatings Technol. 191 (2005) 274.
Sen, S, Ozbek, I, Sen, U, and Bindal, C, Surf. Coatings Technol. 135 (2001) 173.
Genel, K, Ozbek, I, and Bindal, C, Mater. Sci. Eng. A 347 (2003) 311.
Campos-Silva, I, Ortiz-Domínguez, M, López-Perrusquia, N, Meneses-Amador, A, Escobar-Galindo, R, and Martínez-Trinidad, J, Appl. Surf. Sci. 256 (2010) 2372.
Carbucicchio, M and Palombarini, G, J. Mater. Sci. Lett. 6 (1987) 1147.
Palombarini, G and Carbucicchio, M, J. Mater. Sci. Lett. 6 (1987) 415.
Carbucicchio, M, Meazza, G, and Palombarini, G, J. Mater. Sci. 17 (1982) 3123.
Campos, I, Palomar, M, Amador, A, Ganem, R, and Martinez, J, Surf. Coatings Technol. 201 (2006) 2438.
Campos-Silva, I, Ortiz-Dominguez, M, Lopez-Perrusquia, N, Meneses-Amador, A, Escobar-Galindo, R, and Martinez-Trinidad, J, Appl. Surf. Sci. 256 (2010) 2372.
Campos-Silva, I, Flores-Jiménez, M, Rodríguez-Castro, G, Hernández-Sánchez, E, Martínez-Trinidad, J, and Tadeo-Rosas, R, Surf. Coatings Technol. 237 (2013) 429.
Campos, I, Rosas, R, Figueroa, U, VillaVelázquez, C, Meneses, A, and Guevara, A, Mater. Sci. Eng. A 488 (2008) 562.
Campos, I, Palomar-Pardavé, M, Amador, A, VillaVelázquez, C, and Hadad, J, Appl. Surf. Sci. 253 (2007) 9061.
Brakman, C M, Gommers, A W J, and Mittemeijer, E J, J. Mater. Res. 4 (1989) 1354.
Yu, L G, Chen, X J, Khor, K A, and Sundararajan, G, Acta Mater. 53 (2005) 2361.
Persson, A, Hogmark, S, and Bergström, J, Surf. Coatings Technol. 191 (2005) 216.
Martini, C, Palombarini, G, Poli, G, and Prandstraller, D, Wear 256 (2004) 608.
Jain, V and Sundararajan, G, Surf. Coatings Technol. 149 (2002) 21.
Genel, K, Vacuum 80 (2006) 451.
Taktak, S, Mater. Des. 28 (2007) 1836.
Atar, E, Kayali, E S, and Cimenoglu, H, Surf. Coatings Technol. 202 (2008) 4583.
Uslu, I, Comert, H, Ipek, M, Ozdemir, O, and Bindal, C, Mater. Des. 28 (2007) 55.
Rie, K-T, Surf. Coatings Technol. 112 (1999) 56.
Béjar, M A and Moreno, E, J. Mater. Process. Technol. 173 (2006) 352.
Acknowledgements
This work was supported by the research grant 20201038 of the Instituto Politécnico Nacional of México. R.A. García-León thanks Prof. J. Martinez-Trinidad and Prof. I. Campos-Silva for the opportunity to work in such a prestigious research group (GIS, “Grupo Ingeniería de Superficies” del Instituto Politécnico Nacional, Mexico).
Author information
Authors and Affiliations
Contributions
R.A. García-León: Investigation, collected data, formal analysis, original draft, writing—review & editing. J. Martinez-Trinidad: Analysis tools, funding acquisition, formal analysis, other contribution. I. Campos-Silva: Contributed data, formal analysis, other contribution.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
García-León, R.A., Martínez-Trinidad, J. & Campos-Silva, I. Historical Review on the Boriding Process using Bibliometric Analysis. Trans Indian Inst Met 74, 541–557 (2021). https://doi.org/10.1007/s12666-020-02174-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12666-020-02174-6