Abstract
Changes in the extract composition and lignin structure are the main factors that affect color changes in wood during heat treatment. GC–MS analysis revealed that changes in the aromatic and ketone containing compounds in the extractives followed the same trend as changes in the ΔE* of the wood. 2D-HSQC NMR analysis showed that the lignin structure of heat-treated Chinese fir pretreated with aluminum sulfate changed significantly, and β-O-4 bonds were broken in the side chains. Additionally, condensation reactions occurred on the benzene ring, indicating that sulfate ion obviously affected the heat treatment of wood. Further analysis of lignin with XPS, UV–Vis, and FTIR showed that pretreatment with 0.2 mol/L aluminum sulfate produced more –C=O bonds in heat-treated Chinese fir, more hydroxyl groups at a dosage of 0.4 mol/L, and more ether bonds when the dosage reached 0.6 mol/L. These structural changes are thought to be related to the H+ produced by the hydrolysis and absorption-bridge reactions of aluminum ions in wood during heat treatment. At the same impregnation dosage, as the heat treatment temperature increased, the ΔE* gradually increased.
Similar content being viewed by others
Availability of data and material
All data are fully available without restriction.
Code availability
Not applicable.
References
Aarum I, Solli A, Gunnarsson H, Kalyani D, Devle H, Ekeberg D, Stenstrom Y (2019) Comparison of pyrolyzed lignin before and after milled wood lignin purification of Norway spruce with increasing steam explosion. Wood Sci Technol 53:601–618. https://doi.org/10.1007/s00226-019-01088-x
Argyropoulos DS (2000) Wood and cellulosic chemistry. Second Edition, Revised and Expanded Edited by David N.-S. Hon (Clemson University) and Nubuo Shiraishi (Kyoto University). Marcel Dekker: New York and Basel. 2001. vii 914 pp. $250.00. ISBN 0–8247–0024–4. J Am Chem Soc 123:8880–8881 doi:https://doi.org/10.1021/ja015237p
Bao MZ, Huang XA, Jiang ML, Li N, Yu YL, Yu WJ (2018) Study on the changes in surface characteristics of Populus tomentosa due to thermo-hydro-process. J Wood Sci 64:264–278. https://doi.org/10.1007/s10086-018-1697-9
China National Standard GB/T 2677.4–1993a (1993a) Fibrous raw material-determination of one percent sodium hydroxide solubility. Standardization Administration of the Peoples Republic of China (SAC), Beijing
China National Standard GB/T 2677.4–1993b (1993b) Fibrous raw material-determination of water solubility. Standardization Administration of the Peoples Republic of China (SAC), Beijing
China National Standard GB/T 2677.6–1994 (1994) Fibrous raw material-determination of solvent solubility. Standardization Administration of the Peoples Republic of China (SAC), Beijing
Deegan AM, Shaik B, Nolan K, Urell K, Oelgemoller M, Tobin J, Morrissey A (2011) Treatment options for wastewater effluents from pharmaceutical companies. Int J Environ Sci Technol 8:649–666. https://doi.org/10.1007/bf03326250
Del Río JC, Jorge R, Pepijn P, Ángel TM, John R, Ana G (2012) Structural characterization of wheat straw lignin as revealed by analytical pyrolysis, 2D-NMR, and reductive cleavage methods. J Agric Food Chem 60:5922. https://doi.org/10.1021/jf301002n
Feng Z, Alén R, Niemelo K (2002) Formation of aliphatic carboxylic acids during soda-AQ pulping of kenaf bark. Holzforschung 56:388–394. https://doi.org/10.1515/HF.2002.061
Gao X, Dong YM, Wang KL, Chen ZR, Yan YT, Li JZ, Zhang SF (2017) Improving dimensional and thermal stability of poplar wood via aluminum-based sol-gel and furfurylation combination treatment. BioResources 12:3277–3288. https://doi.org/10.15376/biores.12.2.3277-3288
Garrote G, Dominguez H, Parajo JC (2001) Study on the deacetylation of hemicelluloses during the hydrothermal processing of Eucalyptus wood. Holz Roh-Werkst 59:53–59. https://doi.org/10.1007/s001070050473
Gonzalez-Pena MM, Hale MDC (2009) Colour in thermally modified wood of beech, Norway spruce and Scots pine Part 1: colour evolution and colour changes. Holzforschung 63:385–393. https://doi.org/10.1515/hf.2009.078
Gosz K, Kosmela P, Hejna A, Gajowiec G, Piszczyk L (2018) Biopolyols obtained via microwave-assisted liquefaction of lignin: structure, rheological, physical and thermal properties. Wood Sci Technol 52:599–617. https://doi.org/10.1007/s00226-018-0991-4
Grosse C, Grigsby WJ, Noel M, Treu A, Thevenon MF, Gerardin P (2019) Optimizing chemical wood modification with oligomeric lactic acid by screening of processing conditions. J Wood Chem Technol 39:385–398. https://doi.org/10.1080/02773813.2019.1601739
Guo S, You T, Zhou T, Feng XU (2016) Structure elucidation of cellulolytic enzyme lignin from Arundo donax Linn after acid-catalyzed ionic liquid pretreatment. J For Eng 1(02):82–87. https://doi.org/10.13360/j.issn.2096-1359.2016.02.015
Herrera R, Muszynska M, Krystofiak T, Labidi J (2015) Comparative evaluation of different thermally modified wood samples finishing with UV-curable and waterborne coatings. Appl Surf Sci 357:1444–1453. https://doi.org/10.1016/j.apsusc.2015.09.259
Herrera R, Sandak J, Robles E, Krystofiak T, Labidi J (2018) Weathering resistance of thermally modified wood finished with coatings of diverse formulations. Prog Org Coat 119:145–154. https://doi.org/10.1016/j.porgcoat.2018.02.015
Huang C, He J, Du L, Min D, Qiang Y (2015) Structural characterization of the lignins from the green and yellow bamboo of bamboo culm (Phyllostachys pubescens). J Wood Chem Technol 36:157–172. https://doi.org/10.1080/02773813.2015.1104544
Hundt TR, Omelia CR (1988) Aluminum fulvic acid interactions: mechanisms and applications. J Am Water Work Assoc 80:176–186. https://doi.org/10.1002/j.1551-8833.1988.tb03023.x
Irfan M, Butt T, Imtiaz N, Abbas N, Khan RA, Shafique A (2017) The removal of COD, TSS and colour of black liquor by coagulation-flocculation process at optimized pH, settling and dosing rate. Arabian J Chem 10:S2307–S2318. https://doi.org/10.1016/j.arabjc.2013.08.007
Katal R, Pahlavanzadeh H (2011) Influence of different combinations of aluminum and iron electrode on electrocoagulation efficiency: application to the treatment of paper mill wastewater. Desalination 265:199–205. https://doi.org/10.1016/j.desal.2010.07.052
Kondratyeva E, Safiullin KR, Motygullin I, Klochkov A, Tagirov M, Reita V (2016) Thermal modification of wood and a complex study of its properties by magnetic resonance and other methods. Wood Sci Technol 50:895–916. https://doi.org/10.1007/s00226-016-0825-1
Kubovský I, Babiak M (2009) Color changes induced by CO2 laser irradiation of wood surface. Wood Res 54:61–66. https://doi.org/10.1145/1553374.1553534
Kubovsky I, Kacik F (2014) Colour and chemical changes of the lime wood surface due to CO2 laser thermal modification. Appl Surf Sci 321:261–267. https://doi.org/10.1016/j.apsusc.2014.09.124
Lee CH, Yang TH, Cheng YW, Lee CJ (2018) Effects of thermal modification on the surface and chemical properties of moso bamboo. Constr Build Mater 178:59–71. https://doi.org/10.1016/j.conbuildmat.2018.05.099
Li T, Cai J, Avramidis S, Cheng D, Wålinder MEP, Zhou D (2017) Effect of conditioning history on the characterization of hardness of thermo-mechanical densified and heat treated poplar wood. Holzforschung 71:515–520. https://doi.org/10.1515/hf-2016-0178
Li YY, Gao LK, Li J (2019) Photoresponsive wood-based composite fabricated by a simple drop-coating procedure. Wood Sci Technol 53:211–226. https://doi.org/10.1007/s00226-018-1062-6
Marcon B, Goli G, Matsuo-Ueda M, Denaud L, Umemura K, Gril J, Kawai S (2018) Kinetic analysis of poplar wood properties by thermal modification in conventional oven. iForest 11:131–139. doi:https://doi.org/10.3832/ifor2422-010
Meng FD, Yu YL, Zhang YM, Yu WJ, Gao JM (2016) Surface chemical composition analysis of heat-treated bamboo. Appl Surf Sci 371:383–390. https://doi.org/10.1016/j.apsusc.2016.03.015
Pandey KK (2005) Study of the effect of photo-irradiation on the surface chemistry of wood. Polym Degrad Stab 90:9–20. https://doi.org/10.1016/j.polymdegradstab.2005.02.009
Park JD, Hopwood SL, Lacher JR (1958) Action of aluminum chloride on hexafluoropropene. J Org Chem 23:1169–1171. https://doi.org/10.1021/jo01102a024
Peng W, Li K, Wu S (2010) Principle of wood extract permeability barrier. Chemical Industry Press, Beijing
Percin O, Sofuoglu SD, Uzun O (2015) Effects of boron impregnation and heat treatment on some mechanical properties of oak (Quercus petraea Liebl). Wood Bioresour 10:3963–3978
Qiu ZM, Jiang WT, He ZJ (2009) Post-treatment of banknote printing wastewater using polysilicate ferro-aluminum sulfate (PSFA). J Hazard Mater 166:740–745. https://doi.org/10.1016/j.jhazmat.2008.11.128
Rahbar M, Alipour E, Sedighi R (2006) Color removal from industrial wastewater with a novel coagulant flocculant formulation. Int J Environ Sci Technol. https://doi.org/10.1007/BF03325910
Rencoret J, Marques G, Gutiérrez A, Nieto L, Jiménez-Barbero J, Martínez ÁT, Río JCD (2009) Isolation and structural characterization of the milled-wood lignin from Paulownia fortunei wood. Ind Crops Prod 30:137–143. https://doi.org/10.1016/j.indcrop.2009.03.004
Rencoret J, Marques G, Gutiérrez A, Ibarra D, Li J, Gellerstedt GR, Santos JI, Jiménez-Barbero J, Martínez ÁT, del Río JC (2008) Structural characterization of milled wood lignins from different eucalypt species. Holzforschung 62(5):514–526. https://doi.org/10.1515/HF.2008.096
Shen HY, Zhang SD, Cao JZ, Jiang J, Wang W (2018) Improving anti-weathering performance of thermally modified wood by TiO2 sol or/and paraffin emulsion. Constr Build Mater 169:372–378. https://doi.org/10.1016/j.conbuildmat.2018.03.036
Sikora A, Kacik F, Gaff M, Vondrova V, Bubenikova T, Kubovsky I (2018) Impact of thermal modification on color and chemical changes of spruce and oak wood. J Wood Sci 64:406–416. https://doi.org/10.1007/s10086-018-1721-0
Sun JX, Sun XF, Sun RC, Fowler P, Baird MS (2003) Inhomogeneities in the chemical structure of sugarcane bagasse lignin. J Agric Food Chem 51:6719–6725. https://doi.org/10.1021/jf034633j
Sun YC, Liu XN, Wang TT, Xue BL, Sun RG (2019) Green process for extraction of lignin by the microwave-assisted ionic liquid approach: toward biomass biorefinery and lignin characterization. ACS Sustain Chem Eng 7:13062–13072. https://doi.org/10.1021/acssuschemeng.9b02166
Temiz A, Terziev N, Jacobsen B, Eikenes M (2006) Weathering, water absorption, and durability of silicon, acetylated, and heat-treated wood. J Appl Polym Sci 102:4506–4513. https://doi.org/10.1002/app.24878
Wang HM, Wang B, Wen JL, Yuan TQ, Sun RC (2017) Structural characteristics of lignin macromolecules from different eucalyptus species. ACS Sustain Chem Eng 5:11618–11627. https://doi.org/10.1021/acssuschemeng.7b02970
Wang XJ, Qiao W, Xiao DM, Li SJ (2019) Catalytic degradation of lignin by aluminum oxide monosodium solid superbase. Chem Ind For Prod 39:80–86. https://doi.org/10.3969/j.issn.0253-2417.2019.05.011
Wen JL, Sun SL, Xue BL, Sun RC (2013) Recent advances in characterization of lignin polymer by solution-state nuclear magnetic resonance (NMR) methodology. Materials 6:359–391. https://doi.org/10.3390/ma6010359
Wen JL, Sun SL, Yuan TQ, Xu F, Sun RC (2014) Understanding the chemical and structural transformations of lignin macromolecule during torrefaction. Appl Energy 121:1–9. https://doi.org/10.1016/j.apenergy.2014.02.001
Wikberg H, Maunu SL (2004) Characterisation of thermally modified hard- and softwoods by C-13 CPMAS NMR. Carbohydr Polym 58:461–466. https://doi.org/10.1016/j.carbpol.2004.08.008
Wong SS, Teng TT, Ahmad AL, Zuhairi A, Najafpour G (2006) Treatment of pulp and paper mill wastewater by polyacrylamide (PAM) in polymer induced flocculation. J Hazard Mater 135:378–388. https://doi.org/10.1016/j.jhazmat.2005.11.076
Xiao Z, Xu J, Mai C, Militz H, Wang Q, Xie Y (2016) Combustion behavior of Scots pine (Pinus sylvestris L) sapwood treated with a dispersion of aluminum oxychloride-modified silica. Holzforschung 70:1165–1173. https://doi.org/10.1515/hf-2016-0062
Yamauchi S, Iijima Y, Doi S (2005) Spectrochemical characterization by FT-Raman spectroscopy of wood heat-treated at low temperatures: Japanese larch and beech. J Wood Sci 51:498–506. doi:https://doi.org/10.1007/s10086-004-0691-6
Zeniya N, Endo-Ujiie K, Obataya E, Nakagawa-Izumi A, Matsuo-Ueda M (2019) Effects of water-soluble extractives on the vibrational properties and color of hygrothermally treated spruce wood. Wood Sci Technol 53:151–164. https://doi.org/10.1007/s00226-018-1069-z
Zhang BP, Yang DJ, Qiu XQ, Qian Y, Yan MZ, Li Q (2020) Influences of aggregation behavior of lignin on the microstructure and adsorptive properties of lignin-derived porous carbons by potassium compound activation. J Ind Eng Chem 82:220–227. https://doi.org/10.1016/j.jiec.2019.10.016
Zhang LF, Lyu SY, Chen ZL, Wang SQ (2018) Preparation and characterization of dual-functional coatings of nanofibrillated cellulose and modified SrAl2O4: Eu, Dy phosphors. Surf Coat Technol 349:318–327. https://doi.org/10.1016/j.surfcoat.2018.05.071
Zhou Y, Wang Y, Liang Z (2007) Decolorization and COD removal of yeast wastewater by coagulation process using poly-aluminum chloride. In: Proceedings of the water-rock interaction, Vols 1 and 2. Taylor & Francis Ltd, London
Zhu CH, Li BG, Yang HF, Luo QQ (2020) Preparation of ammonium aluminum sulfate dodecahydrate/stearic acid composite material and its phase-change heat-transfer characteristics. Int J Energy Res 44:2061–2071. https://doi.org/10.1002/er.5060
Acknowledgments
This work was supported by the National Key R&D Program of China [grant number 2018YFD0600305]; the Fundamental Research Funds for the Central Universities of China [grant number 2015ZCQ-CL-01]; the Hot Tracking Project in Beijing Forestry University, China [grant number 2017BLRD04].
Author information
Authors and Affiliations
Contributions
LQ and ZH designed the experiments. LQ, ZW and JQ carried out the experiments. LQ and ZH analyzed the data and wrote this manuscript. SY gave valuable suggestions on the experiments and manuscript. LQ, JG, ZH and JQ modified the manuscript in detail.
Corresponding authors
Ethics declarations
Conflict of interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Qu, L., Qian, J., Gao, J. et al. Effect of aluminum sulfate impregnation heat joint treatment on color changes of Chinese fir. Wood Sci Technol 55, 379–401 (2021). https://doi.org/10.1007/s00226-020-01249-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00226-020-01249-3