Skip to main content
Log in

Application of Response Surface Methodology For Modeling and Optimization of A Bio Coagulation Process (Sewage Wastewater Treatment Plant)

  • Published:
Environmental Management Aims and scope Submit manuscript

Abstract

Cactus has shown great capabilities as a bio coagulant/flocculent in the treatment of wastewater and as a factor for sustainable development of the environment, due to its abundance and non-toxicity for human health. This has encouraged the present study based on the design of experiments to optimize the two operating factors: the bio coagulant dosage and initial pH. The effect of these considered factors on turbidity and chemical oxygen demand (COD) reduction performances was investigated to treat sewage wastewater from plants by the coagulation/flocculation process using the response surface methodology (RSM) based on a central composite faced design (CCFD). The effect of the pH on the supernatant turbidity removal and the COD reduction was very significant whereas that of the coagulant dosage was insignificant on the COD removal efficiency. Experimental results revealed that the maximum reduction of turbidity and COD could be reached at a coagulant dosage of 28 mg/l and a pH of 12. At these optimal conditions, the removal efficiency of turbidity and COD was 98.33% and 96.55% respectively. By the end of the treatment, final values of 0.84 NTU and 20.8 mg/l were obtained for turbidity and COD, respectively. A notable decrease of orthophosphate (O- PO4−2), nitrite (N-NO3), ammonium (N-NH4+) and suspended matter (SM) was observed. The study also showed that the quadratic regression model could be used as a theoretical basis for the process based on a high coefficient of determination R2 value > 0.96, obtained from the analysis of variances (ANOVA).

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

Download references

Acknowledgements

We would like to express our utmost gratitude to the laboratory staff members of municipal wastewater treatment plant of Ferjioua (Ain bidha Ahrich) for their great help and for granting us permission to collect samples with continuous cooperation; likewise, our sincere thanks and appreciation are extended to the engineers of the LIPE laboratory, Environmental Process Engineering Laboratory, of Salah Boubnider University Constantine 3.

Funding

Environmental Process Engineering Laboratory (LIPE).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Asma Ayat.

Ethics declarations

Conflict of Interest

The authors declare that they have no conflict of interest.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Ayat, A., Arris, S., Abbaz, A. et al. Application of Response Surface Methodology For Modeling and Optimization of A Bio Coagulation Process (Sewage Wastewater Treatment Plant). Environmental Management 67, 489–497 (2021). https://doi.org/10.1007/s00267-020-01407-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00267-020-01407-0

Keywords

Navigation