A robot chamfering system for special-shaped and thin-walled workpieces
ISSN: 0144-5154
Article publication date: 11 January 2021
Issue publication date: 19 February 2021
Abstract
Purpose
This paper aims to propose a robotic automation system for processing special-shaped thin-walled workpieces, which includes a measurement part and a processing part.
Design/methodology/approach
In the measurement part, to efficiently and accurately realize the three-dimensional camera hand-eye calibration based on a large amount of measurement data, this paper improves the traditional probabilistic method. To solve the problem of time-consuming in the extraction of point cloud features, this paper proposes a point cloud feature extraction method based on seed points. In the processing part, the authors design a new type of chamfering tool. During the process, the robot adopts admittance control to perform compensation according to the feedback of four sensors mounted on the tool.
Findings
Experiments show that the proposed system can make the tool smoothly fit the chamfered edge during processing and the machined chamfer meets the processing requirements of 0.5 × 0.5 to 0.9 × 0.9 mm2.
Practical implications
The proposed design and approach can be applied on many types of special-shaped thin-walled parts. This will give a new solution for the automation integration problem in aerospace manufacturing.
Originality/value
A novel robotic automation system for processing special-shaped thin-walled workpieces is proposed and a new type of chamfering tool is designed. Furthermore, a more accurate probabilistic hand-eye calibration method and a more efficient point cloud extraction method are proposed, which are suitable for this system when comparing with the traditional methods.
Keywords
Acknowledgements
This research was supported by the National Natural Science Foundation of China under Grants 61773141, 61673139.
Citation
Li, M., Du, Z., Ma, X., Dong, W., Wang, Y., Gao, Y. and Chen, W. (2021), "A robot chamfering system for special-shaped and thin-walled workpieces", Assembly Automation, Vol. 41 No. 1, pp. 116-130. https://doi.org/10.1108/AA-05-2020-0060
Publisher
:Emerald Publishing Limited
Copyright © 2020, Emerald Publishing Limited