Abstract
Increasing knowledge of hybrid nanofluid can be traced to its unique improvement of thermal performance and enhancement of heat transfer rate as applicable in the dynamics of fuel and coolant in automobiles. However, the case of water-based nanofluid conveying three kinds of nanoparticles (i.e., ternary-hybrid nanofluid) with various shapes and densities is far-fetched. The transport phenomena of water conveying smaller densities nanoparticles (i.e., copper nanotubes, graphene, and aluminum oxide) and substantial large densities of nanoparticles (i.e., copper oxide, copper, and silver) of various types through a rectangular closed domain with major emphasis on the significance of suction and dual stretching was investigated. The dimensional equation that model the aforementioned transport phenomenon, for the two cases, were non-dimenzionalized using appropriate similarity variables, parameterized, and solved numerically using shooting techniques together with fourth-order Runge-Kutta integration scheme and in-built bvp4c package of MATLAB. Enhancement in suction and stretching ratio causes the vertical velocity of the motion along x-direction and Nusselt number to be an increasing function. Due to an increase in suction and stretching ratio, fluid flow along (x, y)-directions, temperature distribution, and the local skin friction coefficients are decreasing functions. At all the levels of suction and stretching ratio, higher Nusselt numbers were found in the case of water conveying Copper oxide, Copper, and Silver nanoparticles due to their heavy densities.
Acknowledgment
All the authors deeply appreciate the suggestion and comments of the Reviewers and Editorial assistant.
Author contributions: All authors contributed equally to this work.
Research funding: This study was not supported by any research grant.
Conflict of interest statement: The authors declare that they have no conflict of interest.
Availability of data: The data that support the findings of this study are available from the corresponding author upon reasonable request. However, all the data are made available in the article.
References
[1] E. V. Timofeeva, J. L. Routbort, and D. Singh, “Particle shape effects on thermophysical properties of alumina nanofluids,” J. Appl. Phys., vol. 106, no. 1, p. 014304, 2009, https://doi.org/10.1063/1.3155999.Search in Google Scholar
[2] M. Sahu and J. Sarkar, “Steady-state energetic and exergetic performances of single-phase natural circulation loop with hybrid nanofluids,” J. Heat Tran., vol. 141, no. 8, p. 082401, 2019, https://doi.org/10.1115/1.4043819.Search in Google Scholar
[3] Y. Jiang, X. Zhou, and Y. Wang, “Effects of nanoparticle shapes on heat and mass transfer of nanofluid thermocapillary convection around a gas bubble,” Microgravity Sci. Technol., vol. 32, no. 2, pp. 167–177, 2019, https://doi.org/10.1007/s12217-019-09757-z.Search in Google Scholar
[4] M. C. Arno, M. Inam, A. C. Weems, et al.., “Exploiting the role of nanoparticle shape in enhancing hydrogel adhesive and mechanical properties,” Nat. Commun., vol. 11, no. 1, 2020, Art no. 1420. https://doi.org/10.1038/s41467-020-15206-y.Search in Google Scholar
[5] L. Sang, W. Ai, Y. Wu, and C. Ma, “Enhanced specific heat and thermal conductivity of ternary carbonate nanofluids with carbon nanotubes for solar power applications,” Int. J. Energy Res., vol. 44, no. 1, pp. 334–343, 2019, https://doi.org/10.1002/er.4923.Search in Google Scholar
[6] S. M. Mousavi, F. Esmaeilzadeh, and X. P. Wang, “Effects of temperature and particles volume concentration on the thermophysical properties and the rheological behavior of CuO/MgO/TiO2 aqueous ternary hybrid nanofluid,” J. Therm. Anal. Calorim., vol. 137, no. 3, pp. 879–901, 2019, https://doi.org/10.1007/s10973-019-08006-0.Search in Google Scholar
[7] R. R. Sahoo and V. Kumar, “Development of a new correlation to determine the viscosity of ternary hybrid nanofluid,” Int. Commun. Heat Mass Tran., vol. 111, p. 104451, 2020, https://doi.org/10.1016/j.icheatmasstransfer.2019.104451.Search in Google Scholar
[8] M. Abbasi, M. M. Heyhat, and A. Rajabpour, “Study of the effects of particle shape and base fluid type on density of nanofluids using ternary mixture formula: a molecular dynamics simulation,” J. Mol. Liq., vol. 305, p. 112831, 2020, https://doi.org/10.1016/j.molliq.2020.112831.Search in Google Scholar
[9] R. R. Sahoo, “Thermo-hydraulic characteristics of radiator with various shape nanoparticle-based ternary hybrid nanofluid,” Powder Technol., vol. 370, pp. 19–28, 2020, https://doi.org/10.1016/j.powtec.2020.05.013.Search in Google Scholar
[10] N. Gregory and W. S. Walker, “Experiments on the effect of suction on the flow due to a rotating disk,” J. Fluid Mech., vol. 9, no. 02, p. 225, 1960, https://doi.org/10.1017/s0022112060001067.Search in Google Scholar
[11] C. N. Smyth, “Effect of suction on blood-flow in ischaemic limbs,” Lancet, vol. 294, no. 7622, pp. 657–659, 1969, https://doi.org/10.1016/s0140-6736(69)90373-0.Search in Google Scholar
[12] P. Krogmann, E. Stanewsky, and P. Thiede, “Effects of suction on shock/boundary-layer interaction and shock-induced separation,” J. Aircraft, vol. 22, no. 1, pp. 37–42, 1985, https://doi.org/10.2514/3.45077.Search in Google Scholar
[13] I. L. Animasaun, E. A. Adebile, and A. I. Fagbade, “Casson fluid flow with variable thermo-physical property along exponentially stretching sheet with suction and exponentially decaying internal heat generation using the homotopy analysis method,” J. Niger. Math. Soc., vol. 35, no. 1, pp. 1–17, 2016, https://doi.org/10.1016/j.jnnms.2015.02.001.Search in Google Scholar
[14] M. Zaydan, A. Wakif, I. L. Animasaun, U. Khan, B. Dumitru, and R. Sehaqui, “Significances of blowing and suction processes on the occurrence of thermo-magneto-convection phenomenon in a narrow nanofluidic medium,” Case Stud. Therm. Eng., vol. 22, p. 100726, 2020, https://doi.org/10.1016/j.csite.2020.100726.Search in Google Scholar
[15] A. Wakif, A. Chamkha, I. L. Animasaun, M. Zaydan, H. Waqas, and R. Sehaqui, “Novel physical insights into the thermodynamic irreversibilities within dissipative EMHD fluid flows past over a moving horizontal Riga plate in the coexistence of wall suction and joule heating effects: a comprehensive numerical investigation,” Arabian J. Sci. Eng., 2020, https://doi.org/10.1007/s13369-020-04757-3, in-press.Search in Google Scholar
[16] M. Ghalambaz, S. A. Mehryan, N. Mashoofi, et al.., “Free convective melting-solidification heat transfer of nano-encapsulated phase change particles suspensions inside a coaxial pipe,” Adv. Powder Technol., vol. 31, no. 11, pp. 4470–4481, 2020, https://doi.org/10.1016/j.apt.2020.09.022.Search in Google Scholar
[17] M. Ghalambaz, S. A. M. Mehryan, I. Zahmatkesh, and A. Chamkha, “Free convection heat transfer analysis of a suspension of nano-encapsulated phase change materials (NEPCMs) in an inclined porous cavity,” Int. J. Therm. Sci., vol. 157, p. 106503, 2020, https://doi.org/10.1016/j.ijthermalsci.2020.106503.Search in Google Scholar
[18] S. M. Hashem Zadeh, S. A. M. Mehryan, M. Sheremet, M. Ghodrat, and M. Ghalambaz, “Thermo-hydrodynamic and entropy generation analysis of a dilute aqueous suspension enhanced with nano-encapsulated phase change material,” Int. J. Mech. Sci., vol. 178, p. 105609, 2020, https://doi.org/10.1016/j.ijmecsci.2020.105609.Search in Google Scholar
[19] A. I. Alsabery, I. Hashim, A. Hajjar, M. Ghalambaz, S. Nadeem, and M. Saffari Pour, “Entropy generation and natural convection flow of hybrid nanofluids in a partially divided wavy cavity including solid blocks,” Energies, vol. 13, no. 11, p. 2942, 2020, https://doi.org/10.3390/en13112942.Search in Google Scholar
[20] B. Sahoo, S. Poncet, and F. Labropulu, “Suction/injection effects on the swirling flow of a Reiner-Rivlin fluid near a rough surface,” J. Fluid., vol. 2015, 2015, Art no. 253504, https://doi.org/10.1155/2015/253504.Search in Google Scholar
[21] S. Rehman, M. Idrees, R. A. Shah, and Z. Khan, “Suction/injection effects on an unsteady MHD Casson thin film flow with slip and uniform thickness over a stretching sheet along variable flow properties,” Bound. Value Probl., vol. 2019, no. 1, 2019, https://doi.org/10.1186/s13661-019-1133-0.Search in Google Scholar
[22] L. Zhao and M. Dong, “Effect of suction on laminar-flow control in subsonic boundary layers with forward-/backward-facing steps,” Phys. Fluids, vol. 32, no. 5, p. 054108, 2020, https://doi.org/10.1063/5.0007624.Search in Google Scholar
[23] A. S. Nehad, I. L. Animasaun, A. Wakif, et al.., “Significance of suction and dual stretching on the dynamics of various hybrid nanofluids: comparative analysis between type I and type II models,” Phys. Scripta, vol. 95, no. 9, p. 095205, 2020, https://doi.org/10.1088/1402-4896/aba8c6.Search in Google Scholar
[24] L. Prandtl, “Uber Flussigkeitsbewegung bei sehr kleiner Reibung translated to “Motion of fluids with very little viscosity”,” Int. Math.-Kongr. Heidelb., vol. 8, no. 13, pp. 1–8, 1904.Search in Google Scholar
[25] B. C. Sakiadis, “Boundary layer behavior on continuous solid surfaces: The boundary layer on a continuous flat surface,” Am. Inst. Chem. Eng. (AIChE), vol. 7, pp. 221–225, 1961.10.1002/aic.690070211Search in Google Scholar
[26] R. R. Sahoo, “Heat transfer and second law characteristics of radiator with dissimilar shape nanoparticle.based ternary hybrid nanofluid,” J. Therm. Anal. Calorim., 2020, https://doi.org/10.1007/s10973-020-10039-9, in-press.Search in Google Scholar
[27] V. Rudyak, A. A. Belkin, E. A. Tomilina, and V. V. Egorov, “Nanoparticle friction force and effective viscosity of nanosuspensions,” Defect Diffusion Forum, vols 273–276, pp. 566–571, 2008, https://doi.org/10.4028/www.scientific.net/ddf.273-276.566.Search in Google Scholar
[28] X. Wang, X. Xu, and S. U. S. Choi, “Thermal conductivity of nanoparticle - fluid mixture,” J. Thermophys. Heat Tran., vol. 13, no. 4, pp. 474–480, 1999, https://doi.org/10.2514/2.6486.Search in Google Scholar
[29] C. J. Ho, J. B. Huang, P. S. Tsai, and Y. M. Yang, “Preparation and properties of hybrid water-based suspension of Al2O3 nanoparticles and MEPCM particles as functional forced convection fluid,” Int. Commun. Heat Mass Tran., vol. 37, no. 5, pp. 490–494, 2010, https://doi.org/10.1016/j.icheatmasstransfer.2009.12.007.Search in Google Scholar
[30] B. Takabi and S. Salehi, “Augmentation of the heat transfer performance of a sinusoidal corrugated enclosure by employing hybrid nanofluid,” Adv. Mech. Eng., vol. 6, p. 147059, 2014, https://doi.org/10.1155/2014/147059.Search in Google Scholar
[31] N. Ahammed, L. G. Asirvatham, and S. Wongwises, “Entropy generation analysis of graphene-alumina hybrid nanofluid in multiport minichannel heat exchanger coupled with thermoelectric cooler,” Int. J. Heat Mass Tran., vol. 103, pp. 1084–1097, 2016, https://doi.org/10.1016/j.ijheatmasstransfer.2016.07.070.Search in Google Scholar
[32] K. Kalidasan, R. Velkennedy, and P. R. Kanna, “Laminar natural convection of Copper – titania/Water hybrid nanofluid in an open-ended C – shaped enclosure with an isothermal block,” J. Mol. Liq., vol. 246, pp. 251–258, 2017, https://doi.org/10.1016/j.molliq.2017.09.071.Search in Google Scholar
[33] R. L. Hamilton and O. K. Crosser, “Thermal conductivity of heterogeneous two-component systems,” Ind. Eng. Chem. Fundam., vol. 1, no. 3, pp. 187–191, 1962, https://doi.org/10.1021/i160003a005.Search in Google Scholar
[34] E. Buyuk Ogut, “Natural convection of water-based nanofluids in an inclined enclosure with a heat source,” Int. J. Therm. Sci., vol. 48, no. 11, pp. 2063–2073, 2009, https://doi.org/10.1016/j.ijthermalsci.2009.03.014.Search in Google Scholar
[35] M. Devarajan, N. Parasumanna Krishnamurthy, M. Balasubramanian, et al.., “Thermophysical properties of CNT and CNT/Al2O3 hybrid nanofluid,” Micro & Nano Lett., vol. 13, no. 5, pp. 617–621, 2018.10.1049/mnl.2017.0029Search in Google Scholar
[36] L. Deng, R. J. Young, I. A. Kinloch, et al.., “Coefficient of thermal expansion of carbon nanotubes measured by Raman spectroscopy,” Appl. Phys. Lett., vol. 104, no. 5, p. 051907, 2014, https://doi.org/10.1063/1.4864056.Search in Google Scholar
[37] T. Y. Na, Computational Methods in Engineering Boundary Value Problems, New York, Academic Press, 1979.Search in Google Scholar
[38] I. L. Animasaun, “Dynamics of unsteady mhd convective flow with thermophoresis of particles and variable thermo-physical properties past a vertical surface moving through binary mixture,” Open J. Fluid Dynam., vol. 5, pp. 106–120, 2015, https://doi.org/10.4236/ojfd.2015.52013.Search in Google Scholar
[39] C. Y. Wang, “Free convection on a vertical stretching surface,” J. Appl. Math. Mech., vol. 69, pp. 418–420, 1989.10.1002/zamm.19890691115Search in Google Scholar
[40] R. S. R. Gorla and I. Sidawi, “Free convection on a vertical stretching surface with suction and blowing,” Appl. Sci. Res., vol. 52, pp. 247–257, 1994.10.1007/BF00853952Search in Google Scholar
[41] M. A. A. Hamad, “Analytical solution of natural convection flow of a nanofluid over a linearly stretching sheet in the presence of magnetic field,” Int. Commun. Heat Mass Tran., vol. 38, pp. 487–492, 2011.10.1016/j.icheatmasstransfer.2010.12.042Search in Google Scholar
[42] R. Kandasamy, I. Muhaimin, and A. K. Rosmila, “The performance evaluation of unsteady MHD non-Darcy nanofluid flow over a porous wedge due to renewable (solar) energy,” Renew. Energy., vol. 64, pp. 1–9, 2014, https://doi.org/10.1016/j.renene.2013.10.019.Search in Google Scholar
© 2020 Walter de Gruyter GmbH, Berlin/Boston
