Abstract
Thermo-physical properties of hollow glass microsphere (HGM) filled silicone resin are analyzed by various mathematical models to optimize the formulation for a low-density high-temperature resistant composite. The study involves analyzing effective thermal conductivity, specific heat, and density for a two-phase particulate composite system by using the most popular expressions available in the literature at various volume fractions of HGM in the silicone resin matrix. Experiments are performed to compare theoretical results with the experimental data and identified the preferred composition with a density as low as 0.39 g/cc and thermal conductivity 0.116 W/m-K. The microstructural studies by SEM are done to explain the deviation in experimental and theoretical results. FEM analysis is done to understand the heat flow phenomenon in HGM filled silicone composites.
Similar content being viewed by others
Data Availability
No further data and material are available.
References
Budov VV (1994) Hollow glass microspheres. Use, properties and technology (Review). Glass and Ceramics 51:230–235
Xie Y, McAllister SD, Edwards DB, Francis Cheng I (2011) Fabrication of porous hollow glass microspheres. J Power Sources 196:10727–10730
Yan K, Xie X, Li B, Yuan J, Zhang J (2011) Influence of the real density and structure imperfection of hollow glass microspheres on the compression strength. Mater Sci Eng A 528:8671–8675
Brow RK, Schmitt ML (2009) A survey of energy and environmental applications of glass. J Euro Cera So 29:1193–1201
P. Jerschow (2001) Silicone Elastomers, Rapra Review Report 137, Volume 12, Number 5. Rapra Technology
Atul Tiwari, Mark D. Soucek (Eds.) (2014), Concise encyclopedia of high performance of silicones. John and Wiley Sons, Inc., Hoboken, NJ, USA
Meng Zhong CUI, Wang W (2007) Thermal properties study on the ablation materials of inorganic silicon compound from organosilicone in high percent conversion. Chin Sci Bull 52:2048–2053
Chukhlanov VY, Trifonov TA, Selivanov OG, Ilinа ME, Chukhlanov NV (2017) Thin-film coatings based on hollow inorganic microspheres and Polyacrylic binder. Inter J Appl Eng Res 12:1194–1199
Bauer PE, Rummer DL (1966) Development and performance of the Gemini ablative heat shield. J SPACECRAFT 3:1495
Chukhlanov YY, Sysoev EP (2000) Use of hollow glass microspheres in Organosilicone Syntatic foam plastics. Glas Ceram 57:11–12
Gao J, Wang J, Xu H, Wu C (2013) Preparation and properties of hollow glass bead filled silicone rubber foam with low thermal conductivity. Mater Des 46:491–496
Nah C, Park JH, Tack Cho C, Chang Y-W, Kaang S (1999) Specific heats of rubber compounds. J Appl Poly Sci 72:1513–1522
Progelhof RC, Throne JL, Ruetsch RR (1976) Methods for predicting the thermal conductivity of composite systems: a review. Poly Eng Sci 76:615–625
Zhai S, Zhang P, Xian Y, Zeng J, Shi B (2018) Effective thermal conductivity of polymer composites: theoretical models and simulation models. Inter J Heat Mass Transf 117:358–374
Pietrak K, Wi’sniewski TS (2015) A review of models for effective thermal conductivity of composite materials. J Power Tech 95:14–24
Agrawal A, Satapathy A (2015) Mathematical model for evaluating effective thermal conductivity of polymer composites with hybrid fillers. Inter J Thermal Sci 89:203–209
Xiao-Jian Wang, Li-Zhi Zhang, Li-Xia Pei (2014) Thermal conductivity augmentation of composite polymer materials with artificially controlled filler shapes. J Appl Polym Sci. https://doi.org/10.1002/APP.39550
Pal R (2008) On the Lewis–Nielsen model for thermal/electrical conductivity of composites. Compos Part A 39:718–726
Liang JZ, Liu ÆGS (2009) A new heat transfer model of inorganic particulate-filled polymer composites. J Mater Sci 44:4715–4720
Liang JZ (2014) Estimation of thermal conductivity for polypropylene/hollow glass bead composites. Compos Part B 56:431–434
Yonng S, Kwon IM, Yong-Gyoo K, Lee S, Seo Y-S (2013) A large increase in the thermal conductivity of carbon nanotube/polymer composite produced by percolation phenomenon. Carbon 55:285–290
Rajesh G, Maji PK, Bhattacharya M, Choudhury A, Roy N, Saxena A (2010) Liquid silicone rubber Vulcanizates: network structure - property relationship and cure kinetics. Polym Polym Compos 18:477–488. https://doi.org/10.1177/096739111001800902
Hu Y, Mei R, An Z, Zhang J (2013) Silicon rubber/hollow glass microsphere composites: influence of broken hollow glass microsphere on mechanical and thermal insulation property. Comp Sci Tech 79:64–69
Wang H, Hou F, Zhao X-J (2015) Simulation of thermal behaviour in hollow glass microsphere filled cement composite. Am J Mater Sci Tech 4:1–11
Acknowledgments
The authors are thankful to DRDO and Director, DRDL, for the support to carry out this work. They are also grateful to MDD, DRDL for helping in the characterization of the material.
Funding
This work was supported by Defence Research and Development Organization (DRDO). However, this research received no specific grant from any funding agency in the public, commercial, or not-for-profit sectors.
Author information
Authors and Affiliations
Contributions
Mrs. Tanu Srivastava carried out the all experimental analysis in this research paper. Dr. Naresh Kumar Katari participated in the design of the work and performed statistical analysis. Prof. Balaji Rao Ravuri contributed in the theoretical analysis and mathematical modeling of thermal properties. Prof. Rambabu Gundla contributed in finite element method (FEM) analysis. Dr. S. Krishna Mohan helped in comparing theoretical and experimental test results and drafting the manuscript. All authors read and approved the manuscript.
Corresponding author
Ethics declarations
This article does not contain any studies with human or animal subjects.
Conflict of Interest
Mrs. Tanu Srivastava, Dr. Naresh Kumar Katari, Prof. Balaji Rao Ravuri, Prof. Rambabu Gundla and Dr. S. Krishna Mohan declare that they have no conflict of interest.
Consent to Participate
I, Naresh Kumar Katari on behalf of all authors hereby declare that we participated in the study and development of this manuscript.
Consent for Publication
I have read the final version and give my consent for the article to be published in your esteem journal.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Srivastava, T., Katari, N.K., Ravuri, B.R. et al. Influence of Filler Content on Thermo-Physical Properties of Hollow Glass Microsphere- Silicone Matrix Composite. Silicon 14, 1179–1189 (2022). https://doi.org/10.1007/s12633-020-00869-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12633-020-00869-5