Abstract
Progressing advancement concerning the intensification of engine thrust to weight ratio in a gas turbine engine offers ascends to extremely loaded compressor stages which have a significant concern in recent times. Non-uniform Inlet flow conditions are frequently occurring in aircraft gas turbines engines that result in chronological distortions of total temperature and total pressure at the engine inlet. Distorted inlet flow operation of the axial compressor deteriorates the aerodynamic performance which reduces stall margin and increased blade stress levels. The current paper aims at the investigation of the flow field in the tip clearance region of the transonic micro-axial flow compressor at non-uniform flow conditions. Under the design and off-design RPM, the current paper focuses on the adverse effects of a steady-state distorted pattern of total pressure inlet flow conditions, including hub radial, tip radial pressure distortion, and combined effects of pressure distortion with bulk swirl flow to evaluate its effects on compressor performance and stability. The results show that like hub radial pressure distortion improves the stability range of turbofan transonic micro-compressor rotor. Whereas tip radial and counter swirl flow deteriorate the performance of the compressor. Furthermore, compressor performance alleviated the stall at higher RPM combined with distorted inlet pressure.
Similar content being viewed by others
Abbreviations
- CFD:
-
Computational fluid dynamics
- ISA:
-
International Standard Atmosphere
- N:
-
Rotor speed
- Po:
-
Total Pressure
- RPM:
-
Revolution per minute
- S:
-
Sutherland constant
- TC:
-
Tip clearance
- Ts :
-
Static temperature
- µ:
-
Sutherland viscosity
- α:
-
Flow angle
References
Ali Raza Naseri SS, Boroomand M (2016) Numerical investigation of effect of inlet swirl and total pressure distortion in performance and stability of an axial transonic compressor. J Therm Sci 25(6):501–510
Biollo R, Benini E (2009) Shock/boundary-layer/tip-clearance interaction in a transonic rotor blade. J Propuls Power 25(3):668–677. https://doi.org/10.2514/1.39541
Charalambous N, Ghisu T, Iurisci G, Pachidis V, Pilidis P (2004) Axial compressor response to inlet flow distortions by a CFD analysis. In: ASME Turbo Expo 2004: Power for Land, Sea, and Air. pp 1637–1649. https://doi.org/10.1115/GT2004-53846.
Cheng F, Sun D, Dong X, Sun X (2017) Prediction of stall inception in multi-stage compressors based on an eigenvalue approach. Sci China Technol Sci 60(8):1132–1143. https://doi.org/10.1007/s11431-016-0355-3
Cousins WT (2004) History, philosophy, physics, and future directions of aircraft propulsion system/inlet integration. In: Proceedings of the ASME turbo expo 2004: Power for Land, Sea, and Air. Vol 2, Turbo Expo 2004. Vienna, Austria. June 14–17, 2004. ASME, pp 305–320. https://doi.org/10.1115/GT2004-54210
De Vanna F, Picano F, Benini E (2020) A sharp-interface immersed boundary method for moving objects in compressible viscous flows. Comput Fluids 201:104415. https://doi.org/10.1016/j.compfluid.2019.104415
Elahi H (2020) The investigation on structural health monitoring of aerospace structures via piezoelectric aeroelastic energy harvesting. Microsyst Technol. https://doi.org/10.1007/s00542-020-05017-y
Elahi H et al (2020) Performance evaluation of a piezoelectric energy harvester based on flag-flutter. Micromachines. https://doi.org/10.3390/mi11100933
Fu L, Feng Z, Li G (2018a) Discussions on problem analysis and solutions of a micro turbine test. Microsyst Technol 24(3):1433–1442. https://doi.org/10.1007/s00542-017-3561-z
Fu L, Feng Z, Li G (2018b) Investigation on design flow of a millimeter-scale radial turbine for micro gas turbine. Microsyst Technol 24(5):2333–2347. https://doi.org/10.1007/s00542-017-3610-7
Jian H, Hu W (2008) Numerical investigation of inlet distortion on an axial flow compressor rotor with circumferential groove casing treatment. Chin J Aeronaut 21(6):496–505. https://doi.org/10.1016/S1000-9361(08)60166-1
Li B, Gu C, Li X, Liu T, Xiao Y (2016) Development and application of a throughflow method for high-loaded axial flow compressors. Sci China Technol Sci 59(1):93–108. https://doi.org/10.1007/s11431-015-5947-4
Mistry C, Pradeep AM (2014) Influence of circumferential inflow distortion on the performance of a low speed, high aspect ratio contra rotating axial fan. J Turbomach. https://doi.org/10.1115/1.4025953
Naseri A, Boroomand M, Tousi AM (2012) The effect of inlet flow distortion on performance of a micro-jet engine: part 1—development of an inlet simulator. In: ASME 2012 international mechanical engineering congress and exposition. pp 317–324. https://doi.org/10.1115/IMECE2012-86865
Sohail MU, Hassan M, Hamdani SHR, Pervez K (2019) Effects of ambient temperature on the performance of turbofan transonic compressor by CFD analysis and artificial neural networks. Eng Technol Appl Sci Res 9(5):4640–4648. https://doi.org/10.48084/etasr.2998
Sohail MU, Hamdani HR, Pervez K (2020) CFD analysis of tip clearance effects on the performance of transonic axial compressor. Fluid Dyn 55(1):133–144. https://doi.org/10.1134/S0015462820010127
Strazisar A, Wood J, Hathaway M, Suder K (1989) Laser anemometer measurements in a transonic axial-flow fan rotor
Sun X, Liu X, Hou R, Sun D (2013) A general theory of flow-instability inception in turbomachinery. AIAA J 51(7):1675–1687. https://doi.org/10.2514/1.J052186
Tommaso Piovesan EB, Magrini A (2019) Accurate 2-D modelling of transonic compressor cascade aerodynamics. Aerospace. https://doi.org/10.3390/aerospace6050057
Vahdati M (2007) A numerical strategy for modelling rotating stall in core compressors. Int J Numer Methods Fluids 53(8):1381–1397. https://doi.org/10.1002/fld.1370
Venturelli G, Benini E (2016) Kriging-assisted design optimization of S-shape supersonic compressor cascades. Aerosp Sci Technol 58:275–297. https://doi.org/10.1016/j.ast.2016.08.021
Viswanath K, Govardhan M (1996) Effect of circumferential inlet flow distortion and swirl on the flow field of an axial flow fan stage. In: Proceedings of the ASME 1996 international gas turbine and aeroengine congress and exhibition, Vol 1, Turbomachinery. Birmingham, UK. June 10–13, 1996. https://doi.org/10.1115/96-GT-263
Yang L, Zheng Q, Lin A, Luo M (2020) Unsteady performance and thermodynamic analysis of aero-engine compressor at different water ingestion conditions. Int J Energy Res 44(8):6567–6582. https://doi.org/10.1002/er.5389
Zhao H, Wang Z, Xi G (2017) Unsteady flow structures in the tip region for a centrifugal compressor impeller before rotating stall. Sci China Technol Sci 60(6):924–934. https://doi.org/10.1007/s11431-016-9005-3
Zhao Y, Xi G, Zou H, Sun Y, Wang Z (2020) Experimental investigation of transient characteristics of mild surge and diffuser rotating stall in a centrifugal compressor with vaned diffuser. Sci China Technol Sci 63(7):1212–1223. https://doi.org/10.1007/s11431-019-1553-7
Zheng X, Jin L, Tamaki H (2013) Influence of volute distortion on the performance of turbocharger centrifugal compressor with vane diffuser. Sci China Technol Sci 56(11):2778–2786. https://doi.org/10.1007/s11431-013-5326-y
Zhong H et al (2020) CFD-based reduced-order modeling of fluidized-bed biomass fast pyrolysis using artificial neural network. Renew Energy 152:613–626. https://doi.org/10.1016/j.renene.2020.01.057
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Sohail, M.U., Elahi, H., Islam, A. et al. CFD analysis on the effects of distorted inlet flows with variable RPM on the stability of the transonic micro-compressor. Microsyst Technol 27, 3811–3827 (2021). https://doi.org/10.1007/s00542-020-05177-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-020-05177-x