Abstract
The conventional cutting fluids are used in metal cutting processes for cooling and lubrication. However, the use of cutting fluids is creating the environmental and biological problems. In order to minimize these problems, it is essential to move towards sustainable cooling techniques. The present investigation determine the influence of sustainable cooling techniques such as cryogenic cooling, minimum quantity lubrication, Al2O3/soluble oil nanofluids based minimum quantity lubrication, SiC/soluble oil nanofluids based MQL and Al-SiC/soluble oil hybrid nanofluids based minimum quantity lubrication on output characteristics during turning of EN-24 steel. For experimentation nanofluids were formulated with accumulation of different weight percentages (0.5wt.%, 1.0wt.%, 1.5wt.%) of Al2O3, SiC and Al-SiC nanoparticles to the soluble oil. The thermal and tribological properties of Al2O3/soluble oil nanofluids, SiC/soluble oil nanofluids and Al-SiC/soluble oil hybrid nanofluids were analyzed. Individual machining performance such as surface roughness height, tool wear and specific energy lead to ambiguous understanding. So, the cumulative performance index is also calculated. The cumulative performance index is used to determine the performance of different sustainable cooling techniques during turning of EN-24 steel. The experimental results revealed that the turning performance of EN-24 steel under Al-SiC/soluble oil hybrid nanofluids based minimum quantity lubrication environment is superior then other machining environments.
Graphical Abstract
Similar content being viewed by others
References
Singh H, Kumar P (2006) Optimizing feed force for turned parts through the Taguchi technique. Sadhana 31(6):671
Komanduri R (1982) Catastrophic shear instability in high speed machining of AISI 4340 steels. Trans ASME J Eng Ind 104:121–128
Thakur A, Gangopadhyay S (2016) Dry machining of nickel-based super alloy as a sustainable alternative using TiN/TiAlN coated tool. J Clean Prod 15(129):256–68
Sharma N, Gupta K (2019) Influence of coated and uncoated carbide tools on tool wear and surface quality during dry machining of stainless steel 304. Mater Res Express 22;6(8):086585
Thakur A, Gangopadhyay S (2016) Influence of tribological properties on the performance of uncoated, CVD and PVD coated tools in machining of Incoloy 825. Tribol Int 102:198–212
Kumar KA, Sugunamma V, Sandeep N (2020) Influence of viscous dissipation on MHD flow of micropolar fluid over a slendering stretching surface with modified heat flux model. J Therm Anal Calorim 139(6):3661–3674
Kumar KA, Reddy JR, Sugunamma V, Sandeep N (2018) Magnetohydrodynamic Cattaneo-Christov flow past a cone and a wedge with variable heat source/sink, Alexandria Eng. J 57:435–443
Kumar KA, Sugunamma V, Sandeep N (2019) A non-Fourier heat flux model for magnetohydrodynamic micropolar liquid flow across a coagulated sheet. Heat Transfer Asian Res 48(7):2819–2843
Hayat T, Javed T, Abbas Z (2009) MHD flow of a micropolar fluid near a stagnation-point towards a non-linear stretching surface. Nonlinear Anal Real World Appl 10(3):1514–26
Sankar M, Park Y, Lopez JM, Do Y (2011) Numerical study of natural convection in a vertical porous annulus with discrete heating. Int J Heat Mass Transf 54(7-8):1493–1505
Astakhov VP (2008) Ecological machining: near-dry machining. Machining. Springer, Berlin, pp 195–223
Sivaiah P, Chakradhar D (2018) Analysis and modeling of cryogenic turning operation using response surface methodology. Silicon 10:1–8
Kumar A, Sugunamma V, Sandeep N (2018) Impact of non-linear radiation on MHD non-aligned stagnation point flow of micropolar fluid over a convective surface. J Non-Equilib Thermodyn 25(4):327–345
Kumar KA, Sugunamma V, Sandeep N (2020) Effect of thermal radiation on MHD Casson fluid flow over an exponentially stretching curved sheet. J Therm Anal Calorim 140(5):2377–2385
Kempannagari AK, Buruju RR, Naramgari S, Vangala S (2020) Effect of Joule heating on MHD non-Newtonian fluid flow past an exponentially stretching curved surface. Heat Transf 49(6):3575–3592
Yildiz Y, Nalbant M (2008) A review of cryogenic cooling in machining processes. Int J Mach Tool Manu 48(9):947–64
Hong SY (1999) Milling tool with rotary cryogenic coolant coupling, Patent Cooperation Treaty (PCT), WO 99/60079
Hong SY (2001) Economical and ecological cryogenic machining. J Manuf Sci Eng 123(2):331–338
Dhar NR, Paul S, Chattopadhyay AB (2002) Role of cryogenic cooling on cutting temperature in turning steel. J Manuf Sci Eng 124(1):146–154
Dhar NR, Kamruzzaman M (2007) Cutting temperature, tool wear, surface roughness and dimensional deviation in turning AISI-4037 steel under cryogenic condition. Int J Mach Tool Manu 47(5):754–759
Ahmed MI, Ismail AF, Abakr YA, Amin AN (2007) Effectiveness of cryogenic machining with modified tool holder. J Mater Process Technol 185(1–3):91–6
Nalbant M, Yildiz Y (2011) Effect of cryogenic cooling in milling process of AISI 304 stainless steel. Trans Nonferrous Metals Soc China 21(1):72–79
Ravi S, Kumar MP (2012) Experimental investigation of cryogenic cooling in milling of AISI D3 tool steel. Mater Manuf Process 27(10):1017–1021
Manimaran G, Venkatasamy R (2014) Influence of cryogenic cooling on surface grinding of stainless steel 316. Cryogenics 59:76–83
Brinksmeier E, Walter A, Janssen R, Diersen P (1999) Aspects of cooling lubrication reduction in machining advanced materials. Pro Inst Mech Eng B 213(8):769–78
Suda S, Yokota H, Inasaki I, Wakabayashi T (2002) A synthetic ester as an optimal cutting fluid for minimal quantity lubrication machining. CIRP Ann Manuf Technol 51(1):95–8
Fratila D, Caizar C (2011) Application of Taguchi method to selection of optimal lubrication and cutting conditions in face milling of AlMg. J Clean Prod 19:640–645
Davim JP, Sreejith PS, Silva J (2007) Turning of brasses using minimum quantity of lubricant (MQL) and flooded lubricant conditions. Mater Manuf Process 22(1):45–50
Rahim EA, Irahim MR, Rahim AA, Aziz S, Mohid Z (2015) Experimental investigation of Minimum Quantity Lubrication (MQL) as a sustainable cooling technique. 12th global conference on sustainable manufacturing 26, pp 351–354
Sharma AK, Singh RK, Dixit AR, Tiwari AK (2017) Novel uses of alumina-MoS2 hybrid nanoparticle enriched cutting fluid in hard turning of AISI 304 steel. J Manuf Process 30:467–482
Sharma AK, Tiwari AK, Dixit AR, Singh RK, Singh M (2018) Novel uses of alumina/graphene hybrid nanoparticle additives for improved tribological properties of lubricant in turning operation. Tribol Int 119:99–111
Khandekar S, Sankar MR, Agnihotri V, Ramkumar J (2012) Nano-cutting fluid for enhancement of metal cutting performance. Mater Manuf Process 27(9):963–967
Mao C, Zou H, Huang X, Zhang J, Zhou Z (2013) The influence of spraying parameters on grinding performance for nanofluid minimum quantity lubrication. Int J Adv Manuf Technol 64(9–12):1791–9
Amrita M, Srikant RR, Sitaramaraju AV, Prasad MMS, Krishna PV (2013) Experimental investigations on influence of mist cooling using nanofluids on machining parameters in turning AISI 1040 steel. Pro Inst Mech Eng J 227(12):1334–1346
Najiha MS, Rahman MM, Kadirgama K (2016) Performance of water-based TiO2 nanofluid during the minimum quantity lubrication machining of aluminium alloy, AA6061-T6. J Clean Prod 135:1623–1636
Singh RK, Sharma AK, Dixit AR, Tiwari AK, Pramanik A, Mandal A (2017) Performance evaluation of alumina-graphene hybrid nano-cutting fluid in hard turning. J Clean Prod 162:830–45
Li W, Kara S (2012) An empirical model for predicting energy consumption of manufacturing processes: a case of turning process. Pro Inst Mech Eng B 225(9):1636–1646
Ghosh S, Rao PV (2018) Specific cutting energy modeling for turning nickel-based Nimonic 90 alloy under MQL condition. Int J Mech Sci 146:25–38
Thakur A, Manna A, Samir S (2020) Multi-response optimization of turning parameters during machining of EN-24 steel with SiC nanofluids based minimum quantity lubrication. Silicon 12(1):71–85
Ranjbarzadeh R, Moradikazerouni A, Bakhtiari R, Asadi A, Afrand M (2019) An experimental study on stability and thermal conductivity of water/silica nanofluids: Eco-friendly production of NPs. J Clean Prod 206:1089–100
Thakur A, Manna A, Samir S (2019) Performance evaluation of different environmental conditions on output characteristics during turning of EN-24 steel. Int J Precis Eng Manuf 20(10):1839–49
Thakur A, Manna A, Samir S (2020) Experimental investigation of nanofluids in minimum quantity lubrication during turning of EN-24 steel. Proc Inst Mech Eng Part J J Eng Tribol 234(5):712–29
Liu G, Li X, Qin B, Xing D, Guo Y, Fan R (2004) Investigation of the mending effect and mechanism of copper nano-particles on a tribologically stressed surface. Tribol Lett 17(4):961–966
Kharb SS, Khatkar SK, Charak A, Thakur A (2020) Tribological investigation of AZ91/SiC magnesium hybrid composite under dry, oil and nanofluids lubricating conditions. Silicon. https://doi.org/10.1007/s12633-020-00520-3
Wu H, Zhao J, Xia W, Cheng X, He A, Yun JH, Wang L, Huang H, Jiao S, Huang L, Zhang S (2017) A study of the tribological behaviour of TiO2 nano-additive water-based lubricants. Tribol Int 109:398–408
Author information
Authors and Affiliations
Contributions
All authors have done equal contribution.
Corresponding author
Ethics declarations
Conflict of Interest
The authors declare that they have no conflict of interest.
Consent to Participate
Yes. All equally participated.
Consent for Publication
Yes granted.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Thakur, A., Manna, A. & Samir, S. Performance Evaluation of Al-SiC Nanofluids Based MQL Sustainable Cooling Techniques During Turning of EN-24 Steel. Silicon 14, 869–882 (2022). https://doi.org/10.1007/s12633-020-00875-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12633-020-00875-7