Abstract
The surface twins were characterized for a strongly basal-textured Mg sheet that was deformed under tension in the extrusion direction (hard-orientation). All the twins observed were tension twins. A significant number of them exhibited negative Schmid factor (m) and Luster–Morris parameter (m′) values. Both a normalized m and grain-boundary misorientation were correlated to the twinning behavior, which was shown to be more dependent on the local conditions than the globally applied stress, thereby limiting the m and m′ correlations.
Graphic Abstract
References
[1] M. A. Kumar and I. J. Beyerlein: J. Mater. Res., 2020, vol. 35, pp. 217-241.
[2] M. H. Yoo and J. K. Lee: Philos. Mag. A, 1991, vol. 63, pp. 987-1000.
[3] L. Capolungo, P. E. Marshall, R. J. Mccabe, I. J. Beyerlein and C. N. Tomé: Acta Mater., 2009, vol. 57, pp. 6047-6056.
[4] I. J. Beyerlein, L. Capolungo, P. E. Marshall, R. J. Mccabe and C. N. Tomé: Philos. Mag., 2010, vol. 90, pp. 2161-2190.
[5] C. D. Barrett, H. El Kadiri and M. A. Tschopp: J. Mech. Phys. Solids, 2012, vol. 60, pp. 2084-2099.
J. Čapek, K. Máthis, B. Clausen and M. Barnett: Acta Mater., 2017, vol. 130, pp. 319-328.
[7] M. A. Kumar, I. J. Beyerlein and C. N. Tomé: Acta Mater., 2016, vol. 116, pp. 143-154.
[8] I. J. Beyerlein, R. J. Mccabe and C. N. Tomé: J. Mech. Phys. Solids, 2011, vol. 59, pp. 988-1003.
[9] M. A. Kumar, B. Clausen, L. Capolungo, R. J. Mccabe, W. Liu, J. Z. Tischler and C. N. Tomé: Nat. Commun., 2018, vol. 9, pp. 1-8.
[10] F. Wang, S. Sandlöbes, M. Diehl, L. Sharma, F. Roters and D. Raabe: Acta Mater., 2014, vol. 80, pp. 77-93.
[11] J. Koike, Y. Sato and D. Ando: Mater. Trans., 2008, vol. 49, pp. 2792-2800.
[12] S. H. Park, S. Hong and C. S. Lee: Scripta Mater., 2010, vol. 62, pp. 202-205.
[13] S. Mu, J. J. Jonas and G. Gottstein: Acta Mater., 2012, vol. 60, pp. 2043-2053.
[14] R. Xin, Y. Liang, C. Ding, C. Guo, B. Wang and Q. Liu: Mater. Des., 2015, vol. 86, pp. 656-663.
[15] C. J. Boehlert, Z. Chen, I. Gutiérrez-Urrutia, J. Llorca and M. T. Pérez-Prado: Acta Mater., 2012, vol. 60, pp. 1889-1904.
[16] É. Martin, L. Capolungo, L. Jiang and J. J. Jonas: Acta Mater., 2010, vol. 58, pp. 3970-3983.
[17] J. J. Jonas, S. Mu, T. Al-Samman, G. Gottstein, L. Jiang and Ė. Martin: Acta Mater., 2011, vol. 59, pp. 2046-2056.
[18] M. A. Kumar, M. Wroński, R. J. Mccabe, L. Capolungo, K. Wierzbanowski and C. N. Tomé: Acta Mater., 2018, vol. 148, pp. 123-132.
[19] M. D. Nave and M. R. Barnett: Scripta Mater., 2004, vol. 51, pp. 881-885.
[20] J. Luster and M. A. Morris: Metall. Mater. Trans. A, 1995, vol. 26, pp. 1745-1756.
[21] T. R. Bieler, R. Alizadeh, M. Peña-Ortega and J. Llorca: Int. J. Plasticity, 2019, vol. 118, pp. 269-290.
[22] T. R. Bieler, P. Eisenlohr, C. Zhang, H. J. Phukan and M. A. Crimp: Curr. Opin. Solid State Mater. Sci., 2014, vol. 18, pp. 212-226.
[23] S. Haouala, R. Alizadeh, T. R. Bieler, J. Segurado and J. Llorca: Int. J. Plasticity, 2020, vol. 126, pp. 102600.
[24] R. Hielscher, C. Silbermann, E. Schmidl and J. Ihlemann: J. Appl. Crystallogr., 2019, vol. 52, pp. 984-996.
[25] F. Bachmann, R. Hielscher and H. Schaeben: Solid State Phenom., 2010, vol. 160, pp. 63-68.
[26] L. J. Long, G. H. Huang, D. D. Yin, B. Ji, H. Zhou and Q. D. Wang: Metall. Mater. Trans. A, 2020, vol. 51, pp. 2738-2751.
[27] G. H. Huang, D. D. Yin, J. W. Lu, H. Zhou, Y. Zeng, G. F. Quan and Q. D. Wang: Mater. Sci. Eng. A, 2018, vol. 720, pp. 24-35.
[28] J. W. Lu, D. D. Yin, G. H. Huang, G. F. Quan, Y. Zeng, H. Zhou and Q. D. Wang: Mater. Sci. Eng. A, 2017, vol. 700, pp. 598-608.
[29] H. Fan, S. Aubry, A. Arsenlis and J. A. El-Awady: Scripta Mater., 2016, vol. 112, pp. 50-53.
[30] C. M. Cepeda-Jiménez, J. M. Molina-Aldareguia and M. T. Pérez-Prado: Acta Mater., 2015, vol. 88, pp. 232-244.
[31] P. E. Marshall, G. Proust, J. T. Rogers and R. J. Mccabe: J. Microsc., 2010, vol. 238, pp. 218-229.
[32] O. Muránsky, L. Balogh, M. Tran, C. J. Hamelin, J. S. Park and M. R. Daymond: Acta Mater., 2019, vol. 175, pp. 297-313.
LS Toth, CF Gu, B Beausir, JJ Fundenberger, M Hoffman: Acta Mater., 2016, vol. 117, pp. 35-42
[34] A. Githens, S. Ganesan, Z. Chen, J. Allison, V. Sundararaghavan and S. Daly: Acta Mater., 2020, vol. 186, pp. 77-94.
[35] W. Z. Abuzaid, M. D. Sangid, J. D. Carroll, H. Sehitoglu and J. Lambros: J. Mech. Phys. Solids, 2012, vol. 60, pp. 1201-1220.
[36] Z. Z. Shi, Y. Zhang, F. Wagner, P. A. Juan, S. Berbenni, L. Capolungo, J. S. Lecomte and T. Richeton: Acta Mater., 2015, vol. 83, pp. 17-28.
[37] K. D. Molodov, T. Al-Samman, D. A. Molodov and G. Gottstein: Acta Mater., 2016, vol. 103, pp. 711-723.
[38] W. Pantleon: Scripta Mater., 2008, vol. 58, pp. 994-997.
[39] D. D. Yin, Q. D. Wang, C. J. Boehlert, Z. Chen, H. M. Li, R. K. Mishra and A. Chakkedath: Metall. Mater. Trans. A, 2016, vol. 47, pp. 6438-6452.
[40] H. Wang, C. J. Boehlert, Q. D. Wang, D. D. Yin and W. J. Ding: Int. J. Plasticity, 2016, vol. 84, pp. 255-276.
[41] M. A. Kumar, I. J. Beyerlein, R. J. Mccabe and C. N. Tomé: Nat. Commun., 2016, vol. 7, pp. 1-9.
This work was supported by the National Natural Science Foundation of China (Nos. 51401172 and 51601003), Sichuan Science and Technology Program (2019YJ0238), and open funding of International Joint Laboratory for Light Alloys (MOE), Chongqing University. We would like to thank the Analytical and Testing Center of Southwest Jiaotong University for assistance with EBSD characterization.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Manuscript submitted August 3, 2020; accepted October 30, 2020.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Chai, Y.Q., Boehlert, C.J., Wan, Y.F. et al. Anomalous Tension Twinning Activity in Extruded Mg Sheet During Hard-Orientation Loading at Room Temperature. Metall Mater Trans A 52, 449–456 (2021). https://doi.org/10.1007/s11661-020-06093-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-020-06093-5