Abstract
Despite the advantages of lightweight aggregate concrete (LWAC), its brittleness in compression has limited its vast application. Jacketing by fiber-reinforced polymer (FRP) tends to be one method to overcome this negative point. The current study attempted to recognize the FRP confinement impact on the LWAC compressive monotonic behavior. Both fine and coarse aggregates were Scoria aggregate. The variables include the type and number of FRP layers; 150 × 300 mm cylindrical specimens were wrapped with 1, 2, 3, and 4 layers of glass FRP (GFRP) and carbon FRP (CFRP) strips. An investigation was performed on the monotonic stress-strain curve belonging to LWAC confined with FRP, and key points, including ultimate stress and strain on the curve, were explored. The results revealed that the key points would significantly improve by increasing FRP layers. Although the influence of GFRP confinement on enhancing the ultimate strain appears to be more considerable than the CFRP confinement, CFRP jacketing of LWAC upgrades the ultimate strength to the higher level compared to wrapping with GFRP. Based on the interpretation of experimental results, a design-oriented stress-strain model was established to predict the monotonic compressive response of Scoria-LWAC circular specimens confined with CFRP and GFRP. The validity of the model was examined. The predicted output was appropriately in line with the experimental findings.
Similar content being viewed by others
References
ABADGARAN Construction Chemicals Co. (2020) Concrete admixture. Power Plast ES, ABADGARAN Construction Chemicals Co., Retrieved June 18, 2020, https://www.abadgarangroup.net/en-US/Product/476/POWER-PLAST%E2%80%93ES
ACI Committee 211 (2004) Standard practice for selecting proportions for structural lightweight concrete. ACI 211.2, American Concrete Institute, Farmington Hills, MI, USA
ACI Committee 318 (2014) Building code requirements for structural concrete (ACI 318-14) and commentary (ACI 318R-14). ACI 318-14, American Concrete Institute, Farmington Hills, MI, USA
AFZIR Strengthening Co. (2020a) Epoxy resin saturant. Reinforcement Product, FRP Resin and Adhesive, AFZIR Strengthening Co., Retrieved June 21, 2020, https://www.afzir.com/products/epoxyimpregnation-resin/
AFZIR Strengthening Co. (2020b) Unidirectional carbon fiber wrap (UCW). Reinforcement Product, FRP Fibers, AFZIR Strengthening Co., Retrieved June 21, 2020, https://www.afzir.com/products/ud-carbon-wrap/
AFZIR Strengthening Co. (2020c) Unidirectional glass fiber wrap (UGW). Reinforcement Product, FRP Fibers, AFZIR Strengthening Co., Retrieved June 21, 2020, https://www.afzir.com/products/ud-glass-wrap/
ASTM C 143 (2014) Standard test method for slump of hydraulic cement concrete. ASTM C 143, ASTM International, West Conshohocken, PA, USA
ASTM C330 (2014) Standard specification for lightweight aggregates for structural concrete. ASTM C330, ASTM International, West Conshohocken, PA, USA
Babamoradi K (2016) Behavior of structural lightweight concrete containing nano-silica under compressive cyclic loading. MSc Thesis, University of Kurdistan, Kurdistan, Iran (in Persian)
Bai YL, Dai JG, Teng J (2017). Buckling of steel reinforcing bars in FRP-confined RC columns: An experimental study. Construction and Building Materials 140:403–415, DOI: https://doi.org/10.1016/j.conbuildmat.2017.02.149
Büyüköztürk O, Yu T (2006) Understanding and assessment of debonding failures in FRP-concrete systems. Seventh international congress on advances in civil engineering, October 11–13, Istanbul, Turkey
Campione G, Miraglia N (2003) Strength and strain capacities of concrete compression members reinforced with FRP. Cement and Concrete Composites 25(1):31–41, DOI: https://doi.org/10.1016/S0958-9465(01)00048-8
Chaallal O, Shahawy M, Hassan M (2003) Performance of axially loaded short rectangular columns strengthened with carbon fiber-reinforced polymer wrapping. Journal of Composites for Construction 7(3):200–208, DOI: https://doi.org/10.1061/(ASCE)1090-0268(2003)7:3(200)
Cui C (2009) Behaviour of normal and high strength concrete confined with fibre reinforced polymers (FRP). PhD Thesis, University of Toronto, Canada
Dai JG, Bai YL, Teng J (2011) Behavior and modeling of concrete confined with FRP composites of large deformability. Journal of Composites for Construction 15(6):963–973, DOI: https://doi.org/10.1061/(ASCE)CC.1943-5614.0000230
Demers M, Neale KW (1999) Confinement of reinforced concrete columns with fibre-reinforced composite sheets-an experimental study. Canadian Journal of Civil Engineering 26(2):226–241, DOI: https://doi.org/10.1139/198-067
Huang Z, Liew JR, Xiong M, Wang J (2015). Structural behavior of double skin composite system using ultra-lightweight cement composite. Construction and Building Materials 96:51–63, DOI: https://doi.org/10.1016/j.conbuildmat.2015.03.092
Jaffry SAD (2001) Concrete filled glass fibre reinforced polymer (GFRP) shells under concentric compression. MSc Thesis, University of Toronto, Toronto, Canada
Jamatia R, Deb A (2017) Size effect in FRP-confined concrete under axial compression. Journal of Composites for Construction 21(6):04017045, DOI: https://doi.org/10.1061/(ASCE)CC.1943-5614.0000825
Jiang JF, Wu YF (2016) Plasticity-based criterion for confinement design of FRP jacketed concrete columns. Materials and Structures 49(6):2035–2051, DOI: https://doi.org/10.1617/s11527-015-0632-4
JGJ12 (2006) Technical specification for lightweight aggregate concrete structures. JGJ12, China Engineering and Construction Society Press, Beijing, China
Jiang T, Teng J (2007) Analysis-oriented stress-strain models for FRP-confined concrete. Engineering Structures 29(11):2968–2986, DOI: https://doi.org/10.1016/j.engstruct.2007.01.010
Jiang J, Xiao P, Li B (2017) A novel triaxial test system for concrete under passive confinement. Journal of Testing and Evaluation 46(3):913–923, DOI: https://doi.org/10.1520/JTE20160547
Jiang JF, Wu YF (2012) Identification of material parameters for Drucker-Prager plasticity model for FRP confined circular concrete columns. International Journal of Solids and Structures 49(3–4):445–456, DOI: https://doi.org/10.1016/j.ijsolstr.2011.10.002
Khoury SS (1993) Behavior of normal and high strength confined concrete columns with and without stubs. PhD Thesis, University of Houston, TX, USA
Kong F, Evans RH (1983) Handbook of structural concrete. McGraw-Hill, New York, NY, USA
Lam L, Teng JG (2003) Design-oriented stress-strain model for FRP-confined concrete. Construction and Building Materials 17(6–7):471–489, DOI: https://doi.org/10.1016/S0950-0618(03)00045-X
Lam L, Teng JG (2004) Ultimate condition of fiber-reinforced polymer-confined concrete. Journal of Composites for Construction 8(6):539–548, DOI: https://doi.org/10.1061/(ASCE)1090-0268(2004)8:6(539)
Li L, Guo Y, Liu F, Bungey J (2006) An experimental and numerical study of the effect of thickness and length of CFRP on performance of repaired reinforced concrete beams. Construction and Building Materials 20(10):901–909, DOI: https://doi.org/10.1016/j.conbuildmat.2005.06.020
Li P, Sui L, Xing F, Huang X, Zhou Y, Yun Y (2018) Effects of aggregate types on the stress-strain behavior of fiber reinforced polymer (FRP)-confined lightweight concrete. Sensors 18(10):3525, DOI: https://doi.org/10.3390/s18103525
Li P, Wu YF (2015). Stress-strain model of FRP confined concrete under cyclic loading. Composite Structures 134:60–71, DOI: https://doi.org/10.1016/j.compstruct.2015.08.056
Li P, Wu YF (2016). Stress-strain behavior of actively and passively confined concrete under cyclic axial load. Composite Structures 149:369–384, DOI: https://doi.org/10.1016/j.compstruct.2016.04.033
Li P, Wu YF, Gravina R (2016). Cyclic response of FRP-confined concrete with post-peak strain softening behavior. Construction and Building Materials 123:814–823, DOI: https://doi.org/10.1016/j.conbuildmat.2016.07.065
Lim JC, Ozbakkaloglu T (2014). Stress-strain model for normal-and light-weight concretes under uniaxial and triaxial compression. Construction and Building Materials 71:492–509, DOI: https://doi.org/10.1016/j.conbuildmat.2014.08.050
Matthys S, Toutanji H, Audenaert K, Taerwe L (2005) Axial load behavior of large-scale columns confined with fiber-reinforced polymer composites. ACI Structural Journal 102(2):258, DOI: https://doi.org/10.14359/14277
Mehta PK, Monteiro PJM (2006) Concrete: Microstructure, properties, and materials, 3rd edition. McGraw-Hill, New York, NY, USA
Mirmiran A, Shahawy M (1997) Behavior of concrete columns confined by fiber composites. Journal of Structural Engineering 123(5):583–590, DOI: https://doi.org/10.1061/(ASCE)0733-9445(1997)123:5(583)
Mirmiran A, Shahawy M, Samaan, M, Echary HE, Mastrapa JC, Pico O (1998) Effect of column parameters on FRP-confined concrete. Journal of Composites for Construction 2(4):175–185, DOI: https://doi.org/10.1061/(ASCE)1090-0268(1998)2:4(175)
Moran DA, Pantelides CP (2002) Stress-strain model for fiber-reinforced polymer-confined concrete. Journal of Composites for Construction 6(4):233–240, DOI: https://doi.org/10.1061/(ASCE)1090-0268(2002)6:4(233)
Nanni A, Bradford NM (1995) FRP jacketed concrete under uniaxial compression. Construction and Building Materials 9(2):115–124, DOI: https://doi.org/10.1016/0950-0618(95)00004-Y
Ozbakkaloglu T, Lim JC (2013). Axial compressive behavior of FRP-confined concrete: Experimental test database and a new design-oriented model. Composites Part B: Engineering 55:607–634, DOI: https://doi.org/10.1016/j.compositesb.2013.07.025
Ozbakkaloglu T, Lim JC, Vincent T (2013). FRP-confined concrete in circular sections: Review and assessment of stress-strain models. Engineering Structures 49:1068–1088, DOI: https://doi.org/10.1016/j.engstruct.2012.06.010
Prota A, Manfredi G, Cosenza E (2006) Ultimate behavior of axially loaded RC wall-like columns confined with GFRP. Composites Part B: Engineering 37(7–8):670–678, DOI: https://doi.org/10.1016/j.compositesb.2006.01.005
Richard RM, Abbott BJ (1975) Versatile elastic-plastic stress-strain formula. Journal of the Engineering Mechanics Division 101(4):511–515
Rousakis T, Tepfers R (2001) Experimental investigation of concrete cylinders confined by carbon FRP sheets, under monotonic and cyclic axial compressive load. Report No.44, Laboratory of Reinforced Concrete, Democritus University of Thrace, Greece, 1–87
Saafi M, Toutanji H, Li Z (1999) Behavior of concrete columns confined with fiber reinforced polymer tubes. Materials Journal 96(4):500–509
Sakai K, Sheikh SA (1989) What do we know about confinement in reinforced concrete columns? ACI Structural Journal 86(2):192–207
Samaan M, Mirmiran A, Shahawy M (1998) Model of concrete confined by fiber composites. Journal of Structural Engineering 124(9):1025–1031, DOI: https://doi.org/10.1061/(ASCE)0733-9445(1998)124:9(1025)
SAMAN GHARB Cement Co. (2020) Portland cement type 1–425. SAMAN GHARB Cement Co., Retrieved June 28, 2020, http://sgcement.com/index.php?option=com_content&view=article&id=6602&Itemid=506&lang=en
Shahawy M, Mirmiran A, Beitelman T (2000) Tests and modeling of carbon-wrapped concrete columns. Composites Part B: Engineering 31(6–7):471–480, DOI: https://doi.org/10.1016/S1359-8368(00)00021-4
Sohel K, Liew JR, Yan J, Zhang MH, Chia KS (2012) Behavior of steel-concrete-steel sandwich structures with lightweight cement composite and novel shear connectors. Composite Structures 94(12):3500–3509, DOI: https://doi.org/10.1016/j.compstruct.2012.05.023
Soudki K, Alkhrdaji T (2005) Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures (ACI 440.2 R-02). Structures congress 2005, April 20–24, New York, NY, USA, 1–8, DOI: https://doi.org/10.1061/40753(171)159
Tamuzs V, Tepfers R, Zile E, Ladnova O (2006) Behavior of concrete cylinders confined by a carbon composite 3. Deformability and the ultimate axial strain. Mechanics of Composite Materials 42(4):303–314, DOI: https://doi.org/10.1007/s11029-006-0040-5
Teng J, Huang Y, Lam L, Ye L (2007) Theoretical model for fiber-reinforced polymer-confined concrete. Journal of Composites for Construction 11(2):201–210, DOI: https://doi.org/10.1061/(ASCE)1090-0268(2007)11:2(201)
Teng J, Jiang T, Lam L, Luo Y (2009) Refinement of a design-oriented stress-strain model for FRP-confined concrete. Journal of Composites for Construction 13(4):269–278, DOI: https://doi.org/10.1061/(ASCE)CC.1943-5614.0000012
Wang H, Wang L (2013). Experimental study on static and dynamic mechanical properties of steel fiber reinforced lightweight aggregate concrete. Construction and Building Materials 38:1146–1151, DOI: https://doi.org/10.1016/j.conbuildmat.2012.09.016
Wang Z, Wang D, Smith ST, Lu D (2012). Experimental testing and analytical modeling of CFRP-confined large circular RC columns subjected to cyclic axial compression. Engineering Structures 46:64–74, DOI: https://doi.org/10.1016/j.engstruct.2012.01.004
Wu YF, Jiang JF (2013). Effective strain of FRP for confined circular concrete columns. Composite Structures 95:479–491, DOI: https://doi.org/10.1016/j.compstruct.2012.08.021
Wu G, Lü Z, Wu Z (2006) Strength and ductility of concrete cylinders confined with FRP composites. Construction and Building Materials 20(3):134–148, DOI: https://doi.org/10.1016/j.conbuildmat.2005.01.022
Xiao Y, Wu H (2000) Compressive behavior of concrete confined by carbon fiber composite jackets. Journal of Materials in Civil Engineering 12(2):139–146, DOI: https://doi.org/10.1061/(ASCE)0899-1561(2000)12:2(139)
Youssef MN, Feng MQ, Mosallam AS (2007) Stress-strain model for concrete confined by FRP composites. Composites Part B: Engineering 38(5–6):614–628, DOI: https://doi.org/10.1016/j.compositesb.2006.07.020
Zhou Y, Li M, Sui L, Xing F (2016a). Effect of sulfate attack on the stress-strain relationship of FRP-confined concrete. Construction and Building Materials 110:235–250, DOI: https://doi.org/10.1016/j.conbuildmat.2015.12.038
Zhou Y, Liu X, Xing F, Cui H, Sui L (2016b). Axial compressive behavior of FRP-confined lightweight aggregate concrete: An experimental study and stress-strain relation model. Construction and Building Material 119:1–15, DOI: https://doi.org/10.1016/j.conbuildmat.2016.02.180
Zhou A, Qin R, Feo L, Penna R, Lau D (2017). Investigation on interfacial defect criticality of FRP-bonded concrete beams. Composites Part B: Engineering 113:80–90, DOI: https://doi.org/10.1016/j.compositesb.2016.12.055
Zhou YW, Wu YF (2012) General model for constitutive relationships of concrete and its composite structures. Composite Structures 94(2):580–592, DOI: https://doi.org/10.1016/j.compstruct.2011.08.022
Acknowledgments
We express our gratitude to the Concrete Research Laboratory, University of Kurdistan, Iran, for their cooperation.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Dabbagh, H., Delshad, M. & Amoorezaei, K. Design-Oriented Stress-Strain Model for FRP-Confined Lightweight Aggregate Concrete. KSCE J Civ Eng 25, 219–234 (2021). https://doi.org/10.1007/s12205-020-0233-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-020-0233-9