Abstract
The technology for producing granules of various fractions from electrodes for centrifugal spraying, which are fabricated according to two technological schemes, is analyzed. The technological schemes considered in the article make it possible to produce granules with a low oxygen content from electrodes of a granular KhN51KVMTYuB (EP741NP) nickel superalloy, and the appearance of the granules does not differ radically from that of the granules produced from the electrodes made by turning a VAR ingot.
Similar content being viewed by others
REFERENCES
E. I. Razuvaev, M. V. Bubnov, M. M. Bakradze, and S. A. Sidorov, “HIP and deformation of granular nickel superalloys,” Aviats. Mater. Tekhn., No. S1 (4), 80–86 (2016).
A. V. Logunov and Yu. N. Shmotin, Modern Nickel Superalloys for Gas Turbine Disks (Materials and Technologies) (Nauka Tekhn., Moscow, 2013).
V. T. Musienko, “Laws of the granule formation during centrifugal spraying of a rotating blank,” Metall. Granul, No. 1, 41–48 (1983).
A. F. Belov, N. F. Anoshkin, and O. Kh. Fatkullin, Structure and Properties of Granulated Nickel Alloys (Metallurgiya, Moscow, 1984).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by K. Shakhlevich
Rights and permissions
About this article
Cite this article
Kabanov, I.V., Sidorina, T.N., Lisovskii, A.V. et al. Scheme for Producing Electrodes from a Granular KhN51KVMTYuB (EP741NP) Nickel Superalloy. Russ. Metall. 2020, 1355–1361 (2020). https://doi.org/10.1134/S0036029520120125
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029520120125