Abstract
The necessity of studying the stirring of liquid-metal components to form homogeneous alloys is substantiated. A mathematical model is developed for the electromagnetic stirring of alloys produced in an electric arc furnace. A special-purpose experiment is carried out to test the proposed model. The results of calculations and experiments performed on a small electric arc furnace are presented. Good agreement of the proposed theory with the experimental results is reached, and recommendations are given for improving the existing technological equipment.
Similar content being viewed by others
REFERENCES
S.-L. Jeng, D.-P. Su, J.-T. Lee, and J.-T. Huang, “Effects of electromagnetic stirring on the cast austenitic stainless steel weldments by gas tungsten arc welding,” Metals 8, 630 (2018). https://doi.org/10.3390/met8080630
S. A. Smirnov, V. V. Kalaev, S. M. Hekhamin, et al., “Mathematical simulation of electromagnetic stirring of liquid steel in a dc arc furnace,” High Temp. 48 (1), 68–76 (2010). https://doi.org/10.1134/S0018151X10010116
A. Yu. Korotchenko, S. V. Kotomin, and M. V. Tverskoy, “The development of new materials and modes of casting metal powder mixtures (MIM technology),” Mater. Sci. Forum 945, 538–542 (2018). https://doi.org/10.4028/www.scientific.net/MSF.945.538
S. N. Poliakov, A. Yu. Korotchenko, and S. L. Timchenko, “A criterion for estimating the probability of microporosity formation in castings,” J. Phys.: Conference Ser. 918 (1), 012001 (2017). https://doi.org/10.1088/1742-6596/918/1/012001
V. N. Anikeev and M. Yu. Dokukin, “Electric arc vacuum technologies and the related equipment,” Russ. Metall. (Metally), No. 6, 576–580 (2019).
M. Yu. Dokukin and A. A. Pshenichnikov, “Theoretical and experimental research of the metal electromagnetic stirring under arc smelting,” in Proceedings of IV International Conference on Plasma Physics and Plasma Technology (Minsk, 2003), Vol. 2, pp. 799–802.
V. N. Anikeev, M. Yu. Dokukin, and V. I. Khvesyuk, “Small electric arc furnace,” Izv. Vyssh. Uchebn. Zaved., Mashinostr., No. 5–6, 119–122 (1999).
C. W. Hirt and B. D. Nichols, “Method for the dynamics of free boundaries,” J. Comput. Phys. 39, 201–225 (1981). https://doi.org/10.1016/0021-9991(81)90145-5
E. L. Shvydkii, S. A. Bychkov, V. V. Zakharov, I. V. Sokolov, and F. E. Tarasov, “Impurity distribution in a double-sided electromagnetic stirrer,” Elektrometallurgiya, No. 10, 11–17 (2018).
Yu. I. Dimitrienko, “Universal models for effective constitutive relations of laminated composites with finite strains,” J. Phys.: Conference Ser. 1141 (1) (2018). https://doi.org/10.1088/1742-6596/1141/1/012098
Yu. I. Dimitrienko and I. O. Bogdanov, “Two-scale modeling of spatial flows of gas and weakly compressible liquid in porous composite structures,” J. Phys.: Conference Ser. 1141 (1), (2018). https://doi.org/10.1088/1742-6596/1141/1/012099
O. Ya. Novikov, V. F. Put’ko, V. V. Tanaev, et al., “Low-temperature plasma,” in Mathematical Methods for Studying the Dynamics and Control Problems of Low-Temperature Plasma, Ed. by B. N. Devyatov and O. Ya. Novikov (Nauka, Novosibirsk, 1991), pp. 126–175.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by K. Shakhlevich
Rights and permissions
About this article
Cite this article
Anikeev, V.N., Dokukin, M.Y. Electromagnetic Stirring in an Electric Arc Metal Melt. Russ. Metall. 2020, 1372–1375 (2020). https://doi.org/10.1134/S0036029520120058
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029520120058