Skip to content
Licensed Unlicensed Requires Authentication Published by De Gruyter January 25, 2020

Design of a Miniaturized Class F Power Amplifier Using Capacitor Loaded Transmission Lines

  • Ali Pirasteh , Saeed Roshani EMAIL logo and Sobhan Roshani
From the journal Frequenz

Abstract

In this paper, a new method to decrease the dimensions of the microstrip structures and reducing the overall size of the class F amplifiers is presented. First, by using the PHEMT transistor with a conventional harmonic control circuit (HCC), a low-voltage class F amplifier in the L band frequency at the operating frequency of 1.75 GHz is introduced, which named primitive class F power amplifier. Then, this amplifier is optimized by using capacitor loaded transmission lines (CLTLs). The measurement results of the amplifier show that by using the CLTL structure, the overall size has been reduced 85% (0.23 λg × 0.17 λg). The maximum power-added efficiency (PAE) of the power amplifier is about 77.5 % and the power gain which has been reached to 18.33 dB. The desirable features of this power amplifier, along with its very small size, make this power amplifier a good choice to use for the global system for mobile communications.

References

[1] A. Grebennekov, RF and Microwave Power Amplifier Design. New York: McGraw Hill, 2004.10.1109/MWSYM.2004.1335949Search in Google Scholar

[2] M. Hayati, S. Roshani, S. Roshani, M. K. Kazimierczuk, and H. Sekiya, “Design of class E power amplifier with new structure and flat top switch voltage waveform,” IEEE Trans Power Electron., vol. 33, no. 3, pp. 2571–2579, 2018.10.1109/TPEL.2017.2698834Search in Google Scholar

[3] S. Roshani, M. Hayati, S. Setayeshi, S. Roshani, and G. Mohamadpour, “A miniaturized harmonic suppressed power amplifier integrated with lowpass filter for long term evolution application,” Analog Integr. Circuits Signal Process., vol. 89, no. 1, pp. 197–204, 2016.10.1007/s10470-016-0816-zSearch in Google Scholar

[4] S. Roshani and S. Roshani, “Two-section impedance transformer design and modeling for power amplifier applications,” Appl. Comput. Electromagn. Soc. J., vol. 32, no. 11, pp. 1042–1047, 2017.Search in Google Scholar

[5] M. Hayati, S. Roshani, and A. R. Zirak, “Design and analysis of optimized class E power amplifier using shunt capacitance in the output structure,” Int. J. Electron., vol. 104, no. 5, pp. 735–746, 2017.10.1080/00207217.2016.1242168Search in Google Scholar

[6] M. Hayati and S. Roshani, “A broadband Doherty power amplifier with harmonic suppression,” AEU-Int J. Electron. Commun., vol. 68, no. 5, pp. 406–412, 2014.10.1016/j.aeue.2013.11.003Search in Google Scholar

[7] M. Hayati and S. Roshani, “A novel miniaturized power amplifier with nth harmonic suppression,” AEU-Int J. Electron. Commun., vol. 68, no. 10, pp. 1016–1021, 2014.10.1016/j.aeue.2014.05.003Search in Google Scholar

[8] T. Sharma, J. Roberts, D. G. Holmes, R. Darraji, J. K. Jones, and F. M. Ghannouchi, “On the double-inflection characteristic of the continuous-wave AM/AM in class-F− 1 power amplifiers,” IEEE Microw. Wirel. Compon. Lett., vol. 28, no. 12, pp. 1131–1133, 2018.10.1109/LMWC.2018.2874156Search in Google Scholar

[9] T. Sharma, P. Aflaki, M. Helaoui, and F. M. Ghannouchi, “Broadband GaN class-E power amplifier for load modulated delta sigma and 5G transmitter applications,” IEEE Access, vol. 6, pp. 4709–4719, 2018.10.1109/ACCESS.2017.2789248Search in Google Scholar

[10] T. Sharma, S. K. Dhar, D. G. Holmes, R. Darraji, S. Embar, J. Staudinger, J. K. Jones, and F. M. Ghannouchi, “Simplified first-pass design of high-efficiency class-F−1 power amplifiers based on second-harmonic minima,” IEEE Trans. Microw. Theory Tech., vol. 67, pp. 3147–3161, 2019.10.1109/TMTT.2019.2896558Search in Google Scholar

[11] Y. Y. Woo, Y. Yang, and B. Kim, “Analysis and experiments for high-efficiency class-F and inverse class-F power amplifiers,” IEEE Trans., vol. 54, no. 5, pp. 1969–1974, 2006.Search in Google Scholar

[12] T. Sharma, E. R. Srinidhi, R. Darraji, D. G. Holmes, J. Staudinger, J. K. Jones, and F. M. Ghannouchi, “High-efficiency input and output harmonically engineered power amplifiers,” IEEE Trans. Microw. Theory Tech., vol. 66, no. 2, pp. 1002–1014, 2018.10.1109/TMTT.2017.2756046Search in Google Scholar

[13] T. Sharma, R. Darraji, F. Ghannouchi, and N. Dawar, “Generalized continuous class-F harmonic tuned power amplifiers,” IEEE Microw. Theory Tech., vol. 26, no. 3, pp. 213–215, 2016.10.1109/LMWC.2016.2524989Search in Google Scholar

[14] F. Raab, “Class-E, class-C, and class-F power amplifiers based upon a finite number of harmonics,” IEEE Trans., vol. 49, no. 8, pp. 1462–1468, 2001.10.1109/22.939927Search in Google Scholar

[15] S. Zheng, Z. Liu, X. Zhang, X. Zho., and W. Chan, “Design of ultra wideband high-efficiency extended continuous class-F power amplifier,” IEEE Trans. Ind. Electron., vol. 65, no. 6, pp. 4661–4669, 2018.10.1109/TIE.2017.2772163Search in Google Scholar

[16] Y. Ding, Y. X. Guo, and F. L. Liu, “High-efficiency concurrent dual-band class-F and inverse class-F power amplifier,” Electron. Lett., vol. 47, no. 15, pp. 847–849, 2011.10.1049/el.2011.1662Search in Google Scholar

[17] J. H. Kim, J. D. Jo, J. H. Oh, Y. H. Kim, K. C. Lee, and J. H. Jung, “Modeling and design methodology of high-efficiency class-F and class- power amplifiers,” IEEE Trans. Microw. Theory Tech., vol. 59, no. 1, pp. 153–165, 2011.10.1109/TMTT.2010.2090167Search in Google Scholar

[18] J. Inchan and J. cressler (2017) A highly efficient X-band inverse class-F SiGe HBT cascode power amplifier with harmonic-tuned Wilkinson power combiner. IEEE Transactions on Circuits and Systems.Search in Google Scholar

[19] M. Yang, J. Xia, Y. Guo, and A. Zhu, “Highly efficient broadband continuous inverse class-F power amplifier design using modified elliptic low-pass filtering matching network,” IEEE Trans. Microw. Theory Tech., vol. 64, no. 5, pp. 1515–1525, 2016.10.1109/TMTT.2016.2544318Search in Google Scholar

[20] S. Chen and Q. Xue, “A class-F power amplifier with CMRC,” IEEE Microw. Wirel. Compon. Lett., vol. 21, no. 1, pp. 31–33, 2011.10.1109/LMWC.2010.2091265Search in Google Scholar

[21] Y. Li, K. Wu, and Q. Xue, “Power amplifier integrated with bandpass filter for long term evolution application,” IEEE Microw. Wirel. Compon. Lett., vol. 23, no. 8, pp. 424–426, 2013.10.1109/LMWC.2013.2268457Search in Google Scholar

[22] J. Xu, X. Zhang, and X. Song, “High-efficiency filter-integrated class-F power amplifier based on dielectric resonator,” IEEE Microw. Wirel. Compon. Lett., vol. 27, no. 9, pp. 827–829, 2017.10.1109/LMWC.2017.2734778Search in Google Scholar

[23] G. Nikandish, E. Babakrpur, and A. Medi, “A harmonic termination technique for single- and multi band high-efficiency class-F MMIC power amplifiers,” IEEE Trans., vol. 62, no. 5, pp. 1212–1220, 2014.10.1109/TMTT.2014.2315591Search in Google Scholar

[24] J. Chen, F. Yao, J. Zhang, and Z. Wei, “An equal-area criterion based pulse encoding strategy for RF switch-mode power amplifier,” Frequenz, vol. 73, no. 1–2, pp. 53–62, 2019.10.1515/freq-2018-0071Search in Google Scholar

[25] N. Tuffy, L. Guan, A. Zhu, and J. Brazil, “A simplified broadband design methodology for linearized high-efficiency continuous class-F power amplifiers,” IEEE Microw. Theory Tech., vol. 60, no. 6, pp. 1952–1963, 2012.10.1109/TMTT.2012.2187534Search in Google Scholar

[26] M. Wren and T. Brazil, “Experimental class-f power amplifier design using computationally efficient and accurate large-signal pHEMT model,” IEEE Trans., vol. 53, no. 5, pp. 1723–1731, 2005.10.1109/TMTT.2005.847108Search in Google Scholar

[27] P. Rostami and S. Roshani, “A miniaturized dual band Wilkinson power divider using capacitor loaded transmission lines,” AEU-Int J. Electron. Commun., vol. 90, pp. 63–68, 2018.10.1016/j.aeue.2018.04.014Search in Google Scholar

[28] M. Sabaghi, S. R. Hadianamrei, M. Rahnama, and M. N. Lahiji, “Using LDMOS transistor in class-F power amplifier for WCDMA applications,” Int. J. Commun. Network Syst. Sci., vol. 4, pp. 662–666, 2011.10.4236/ijcns.2011.410081Search in Google Scholar

[29] Y. Lee, M. Lee, and Y. Jeong, “High-efficiency class-F GaN HEMT amplifier with simple parasitic-compensation circuit,” IEEE Microw. Wirel. Compon. Lett., vol. 18, no. 1, pp. 55–57, 2008.10.1109/LMWC.2007.912023Search in Google Scholar

[30] D. Kang, D. Yu, and K. Min, and etc., “A highly efficient and linear class-AB/F power amplifier for multimode operation,” IEEE Trans., vol. 56, no. 1, pp. 77–87, 2008.10.1109/TMTT.2007.911967Search in Google Scholar

[31] M. Hayati, F. Shama, S. Roshani, and A. Abdipour, “Linearization design method in class-F power amplifier using artificial neural network,” J. Comput. Electron., vol. 13, no. 4, pp. 943–949, 2014.10.1007/s10825-014-0612-xSearch in Google Scholar

[32] A. Pirasteh, S. Roshani, and S. Roshani, “A modified class-F power amplifier with miniaturized harmonic control circuit,” Int. J. Electron. Commun., vol. 97, pp. 202–209, 2018.10.1016/j.aeue.2018.10.022Search in Google Scholar

Received: 2019-10-29
Published Online: 2020-01-25
Published in Print: 2020-03-26

© 2020 Walter de Gruyter GmbH, Berlin/Boston

Downloaded on 7.5.2024 from https://www.degruyter.com/document/doi/10.1515/freq-2019-0180/html
Scroll to top button