Skip to main content

Advertisement

SpringerLink
Log in

Investigation of thermal insulation performance of glass/carbon fiber-reinforced silica aerogel composites

  • Original Paper: Sol-gel and hybrid materials for energy, environment and building applications
  • Published:
Journal of Sol-Gel Science and Technology Aims and scope Submit manuscript

Abstract

Silica aerogels have been widely used as thermal insulators, but their fragility has hindered the potential applications. In this work, a novel way of improving aerogel skeletal structure was proposed where composites were reinforced by three functional layers of glass fiber (GF)/ carbon fiber (CF). Heat insulation performance of fiber-reinforced aerogel composites was also investigated in a simulated solar radiation system. Composites composed of three layers of fiber were prepared by a sol-gel process under ambient pressure drying. The results showed that, as three layers were all GF blankets, the composite heat conductivity increased with increasing glass fiber content. Flexural strength increased initially and reached a maximum at 20% glass fiber content before decreasing. To find a balance between promoting heat insulation performance and strengthening the composite structure, two layers of 5% glass fiber blankets were used as structure strengthening layers and one carding 5% carbon fiber as the heat insulation layer were recommended. Under these conditions, the composite showed extremely low thermal conductivity (0.031 W/m K), almost comparable to that of pure aerogel (0.036 W/m K) while maintaining high flexural strength (2.846 MPa), superior than previous studies. Composites with other ratios of glass/carbon fibers with sandwiched alignments also demonstrated better flexural strength and lower thermal conductivity than GF aerogel composites. This work provided an alternative way to prepare robust and sustainable heat insulation aerogel composites for practical uses.

Highlights

  • Heat insulation performance of silica aerogels composited with different ratios of glass fiber and carbon fiber was investigated.

  • The flexural strength increased with increased glass fiber loading, and reached its highest value when glass fiber content was 20%.

  • 5% carbon fiber inserted between the two 5% glass fiber layers was found the most ideal condition in terms of flexural strength (2.846 MPa) and thermal conductivity (0.031 W/m K).

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3

Similar content being viewed by others

References

  1. Cotana F, Pisello AL, Moretti E, Buratti C (2014) “Multipurpose characterization of glazing systems with silica aerogel: In-field experimental analysis of thermal-energy, lighting and acoustic performance.”. Build Environ 81:92–102

    Article  Google Scholar 

  2. Gao T, Jelle BP, Ihara T, Gustavsen A (2014) “Insulating glazing units with silica aerogel granules: the impact of particle size.”. Appl Energy 128:27–34

    Article  CAS  Google Scholar 

  3. Kistler SS (1931) “Coherent expanded aerogels and jellies”. Nature 127(3211):741–741

    Article  CAS  Google Scholar 

  4. Rao AP, Rao AV, Pajonk GM (2007) “Hydrophobic and physical properties of the ambient pressure dried silica aerogels with sodium silicate precursor using various surface modification agents”. Appl Surf Sci 253(14):6032–6040

    Article  CAS  Google Scholar 

  5. Shewale PM, Rao AV, Gurav JL, Rao AP (2009) “Synthesis and characterization of low density and hydrophobic silica aerogels dried at ambient pressure using sodium silicate precursor”. J Porous Mater 16(1):101–108

    Article  CAS  Google Scholar 

  6. Deng Z, Wang J, Wu A, Shen J, Zhou B (1998) “High strength SiO2 aerogel insulation”. J Non-crystalline Solids 225:101–104

    Article  CAS  Google Scholar 

  7. Wei TY, Lu SY, Chang YC (2009) “A new class of opacified monolithic aerogels of ultralow high-temperature thermal conductivities”. J Phys Chem C 113(17):7424–7428

    Article  CAS  Google Scholar 

  8. Wu H, Liao Y, Ding Y, Wang H, Peng C, Yin S (2014) “Engineering thermal and mechanical properties of multilayer aligned fiber-reinforced aerogel composites”. Heat Transf Eng 35(11-12):1061–1070

    Article  CAS  Google Scholar 

  9. “Aspen Aerogels Industrial Aerogels insulation”. Aspen Aerogels, http://www.aerogel.com. Accessed 11 July 2019

  10. “Cabot Corporation”. CABOT, http://www.cabotcorp.com. Accessed 15 Feb 2017

  11. Yang X, Sun Y, Shi D, Liu J (2011) “Experimental investigation on mechanical properties of a fiber-reinforced silica aerogel composite”. Mater Sci Eng: A 528(13-14):4830–4836

    Article  Google Scholar 

  12. Yang X, Sun Y, Shi D (2012) “Experimental investigation and modeling of the creep behavior of ceramic fiber-reinforced SiO2 aerogel”. J Non-crystalline Solids 358(3):519–524

    Article  CAS  Google Scholar 

  13. Zhou T, Cheng X, Pan Y, Li C, Gong L, Zhang H (2018) Mechanical performance and thermal stability of glass fiber reinforced silica aerogel composites based on co-precursor method by freeze drying. Appl Surf Sci 437:321–328

    Article  CAS  Google Scholar 

  14. Shafi S, Tian J, Navik R, Gai Y, Ding X, Zhao Y (2019) “Fume silica improves the insulating and mechanical performance of silica aerogel/glass fiber composite”. J Supercrit Fluids 148:9–15

    Article  CAS  Google Scholar 

  15. Standard, ASTM 2004. Annual book of ASTM standards. American Society for Testing and Materials Annual, Philadelphia, PA, USA, 4(04.08)

  16. Wang, X 2006. “Base research on the application of nanoporous SiO2 aerogel based thermal insulation composites.” National University of Defense Technology, Changsha

  17. Ślosarczyk A (2017) “Recent advances in research on the synthetic fiber based silica aerogel nanocomposites”. Nanomaterials 7(2):44

    Article  Google Scholar 

  18. Ebert, HP (2011). Thermal properties of aerogels. In Aerogels handbook. Springer, New York, NY, p 537–564

  19. Alvarez G, Palacios MJ, Flores JJ (2000) “A test method to evaluate the thermal performance of window glazings”. Appl Therm Eng 20(9):803–812

    Article  CAS  Google Scholar 

  20. Lee SK, Chen HJ, Fan KS, His HC, Horng RS (2014) “Thermal performance and durability properties of the window glazing with exterior film(s)”. Indoor Built Environ 23(8):1163–1176

    Article  Google Scholar 

  21. Berger, M and Bunsell, A (eds) (1999) Fine Ceramic Fibers. CRC Press. p 239–258. https://books.google.com/books/about/Fine_Ceramic_Fibers.html?id=xH93Gn5pIxQC

Download references

Acknowledgements

The authors wish to thank the ministry of science and technology in Taiwan for their financial support under project MOST 109-2221-E-214-002 and ISU project ISU 108-02-02A, without which this work would have been very difficult.

Author information

Authors and Affiliations

  1. Department of Civil and Environmental Engineering, University of California, Los Angeles, Los Angeles, CA, 90095, USA

    Wei-Cheng Hung

  2. Department of Chemical Engineering, I-Shou University, Kaohsiung City, Taiwan

    Richard S. Horng & Rung-En Shia

Authors
  1. Wei-Cheng Hung
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Richard S. Horng
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Rung-En Shia
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Richard S. Horng.

Ethics declarations

Conflict of interest

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Hung, WC., Horng, R.S. & Shia, RE. Investigation of thermal insulation performance of glass/carbon fiber-reinforced silica aerogel composites. J Sol-Gel Sci Technol 97, 414–421 (2021). https://doi.org/10.1007/s10971-020-05444-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10971-020-05444-3

Keywords

Search

Navigation