Skip to main content
Log in

Substantiation of a Combined Technology for the Hydrometallurgical Beneficiation of a Pyrrhotine-Containing Charge Based on Pressure Oxidation Leaching Using Ferric Sulfate as a Pyrrhotine Oxidizer

  • Published:
Russian Metallurgy (Metally) Aims and scope

Abstract

Two series of comparative experiments are carried out to select the most effective version of pressure oxidation technology (POT) for processing a pyrrhotine-containing charge (PCC) consisting of a mixture of ELNPP TCP and NPC NCP (enriched low-nickel pyrrhotine product and nickel-pyrrhotine concentrate). In the first version (basic), a standard oxidizing agent (oxygen) is used for pressure oxidation leaching (POL); in the second version, iron(III) sulfate is used. The use of iron(III) sulfate in comparison with oxygen makes it possible to significantly increase all the main indicators of the hydrometallurgical beneficiation of PCC. The substitution of iron(III) sulfate for oxygen in the POL operation after optimizing the operation parameters of the “head” POT operations is shown to achieve a high quality of the autoclave sulfide concentrate (ASC; 13–14% Ni) and the completeness of extraction of valuable components into it, namely, 96–97% nickel and 93–95% PGMs. An important competitive advantage of POL processes using iron(III) sulfate is that the formation of a bulky precipitate of iron hydroxides is almost completely excluded during the oxidation of pyrrhotine. In the version of “oxygen” leaching of PCC, it is the formation of this precipitate that causes a high level of the PGM losses with waste technological tailings technology and limits the possibility of improving the quality of ASC. A schematic diagram of POT is proposed for the POL-based hydrometallurgical beneficiation of PCC (ELNPP TCF, NPC NCP, SPM TCF, etc.) using iron(III) sulfate. This scheme can be implemented on the basis of the existing fleet of equipment for the hydrometallurgical production of the Nadezhda metallurgical plant at the minimum capital costs

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1.
Fig. 2.

Similar content being viewed by others

Notes

  1. GMOITs is the Mining and Metallurgical Experimental and Research Center.

  2. KUR-1 is Kaierkansk coal mine no. 1 (open pyrrhotine storage in PB).

  3. M.N. Naftal’ and V.A. Bryukvin, Preliminary Expert Opinion on the Technological Regulations for TEC on the Research Issue “Development of a technology for processing low-nickel pyrrhotine with the maximum use of equipment from HMP NMP”, developed by OOO Institut Gipronikel under contract No. 066-284n (No. NN/348-216 of December 4, 2016) with PAO GMK Norilsk Nickel (Moscow, 2016).

  4. LAP stands for the Laboratory for Autoclave Processes.

  5. The following groups of researchers took part in the work: GMOITs PB (V.V. Gogotina, M.A. Pazina, I.I. Asanova, I.A. Kan, I.V. Batsunova, L.G. Grigorieva, T.P. Saverskaya, et al.); IMET RAS (T.N. Vinetskaya, M.A. Bolshikh, A.O. Bolshikh); FGUP Institut GINTsVETMET (G.A. Lapshina).

REFERENCES

  1. A. D. Genkin, V. V. Distler, G. D. Gladyshev, et al., Sulfide Copper–Nickel Ores of the Norilsk Deposits (Nauka, Moscow, 1981).

    Google Scholar 

  2. A. I. Stekhin, “Ecological and geological typification and assessment of rich copper–nickel ores in the management of the quality of mineral raw materials,” Candidate’s Dissertation in Engineering (Moscow, 1992).

  3. A. D. Genkin, “The main results of studying the distribution and forms of platinum group elements in sulfide copper–nickel ores,” in Proceedings of X All-Union Meeting on Chemistry, Analysis, and Technology of Precious Metals (Novosibirsk, 1976).

  4. L. Sh. Tsemekhman, V. B. Fomichev, L. N. Ertseva, et al., Atlas of Mineral Raw Materials, Technological Industrial Products, and Commercial Products of ZF OAO GMK Norilsk Nickel (Izd. Dom Ruda Metally, Moscow, 2010).

    Google Scholar 

  5. S. M. Kozyrev, M. Z. Komarova, and L. N. Emelina, “Forms of precious metals minerals in copper–nickel ores,” Tsvetn. Met., No. 6, 14–17 (2000).

  6. G. A. Mitenkov, V. V. Knauf, L. N. Ertseva, et al., in Main Problems in the Study of Magmatogenic Ore Deposits (Izd. IGEM RAN, Moscow, 1997), pp. 284–285.

    Google Scholar 

  7. V. F. Borbat, Metallurgy of Platinum Metals (Metallurgiya, Moscow, 1977).

    Google Scholar 

  8. V. F. Borbat, I. N. Maslenitskii, M. V. Nikitin, L. S. Strizhko, and L. V. Chugaev, Metallurgy of Precious Metals (Metallurgiya, Moscow, 1987).

    Google Scholar 

  9. V. I. Goryachkin, I. M. Nelen’, and Ya. M. Schneerson, “Hydrometallurgical processing of copper–nickel concentrates based on pressure oxidation leaching,” in Hydrometallurgy, Pressure Leaching, Sorption, and Extraction Ed. by B. N. Laskorin (Nauka, Moscow, 1976), pp. 48–59.

    Google Scholar 

  10. I. A. Blatov, Enrichment of Copper–Nickel Ores (Izd. Dom Ruda Metally, Moscow, 1998).

    Google Scholar 

  11. S. S. Naboychenko, Ya. M. Schneerson, M. I. Kalashnikova, and L. V. Chugaev, Autoclave Hydrometallurgy of Nonferrous Metals (GOU VPO USTU-UPI, Yekaterinburg, 2009), Vol. 2.

    Google Scholar 

  12. I. N. Khramtsova, V. V. Gogotina, P. M. Baskaev, et al., “Development of a technology for beneficiation of rich and cuprous ores to form high-quality copper and nickel concentrates,” Tsvetn. Met., No. 7, 32–37 (2007).

  13. Kh. A. Bazoev, L. I. Alekseeva, I. N. Khramtsov, et al., “Development of enrichment technologies—a promising way to increase the efficiency of metallurgical production and to solve environmental problems,” Tsvetn. Met., No. 6, 10–17 (2010).

  14. V. O. Potanin, “Modernization of TCF is carried out strictly according to the schedule,” Taimyr Telegraph. Novosti Norilsk, Taimyr, and Krasnoyarsk Territory of May 26, 2014. www.ttelegraf.ru/news/32449-vladimir-potanin-modernizatsiya-TCF-vedetsya-strogo-po-grafiku. Cited June 6, 2019.

  15. S. N. D’yachenko, “Fundamental projects,” Zapolyarnaya Pravda. No. 143 (2014). http://gazetazp.rU/2014/ 143/4/. Cited June 6, 2019.

  16. A. I. Yur’yev, “Under real production conditions,” Zapolarn. Vestn. (08.17.2015). http://norilsk- zv.ru/articles/v_usloviyah_realnogo_proizvodstva.html. Cited June 6, 2019.

  17. A. A. Ryumin, “Talnakhsk concentrating plant is reaching the design indicators for the extraction of metals and the quality of concentrates,” Taimyr Telegraf. Novosti Norilska, Taimyr i Krasnoyarsk Territory (Cited November 4, 2019). http://ttelegraf.ru/news/55331-talnahskaya-obogatitelnaya-fabrika-vyihodit-na-proektnyie-pokazateli-po-izvlecheniyu-metallov-i-kach. Cited June 6, 2019.

  18. L. S. Lesnikova, I. V. Volyanskii, M. S. Datsiev, et al., “Introduction of the technology of enrichment of the charge of rich and cuprous ores at the Talnakh concentrating plant,” Tsvetn. Met., No. 6, 32–37 (2018).

  19. Development of a Technology for the Enrichment of a Mixture of the Rich and Cuprous Ores of the Talnakh and Oktyabrsk Deposits with the Achievement of the Optimal Completeness of the Output of Pyrrhotine to a Dump. Technological Regulations LO GN-2–2008. Stage 3: Results of Pilot Tests on Extraction Technology of Enrichment of a Mixture of Rich and Cuprous Ores of Current Production. Development of Technological Regulations (Contract No. 21-117 nf; reg. No. GN-12-00-17/07) (Norilsk, 2008).

  20. Development of a Technology for the Enrichment of a Mixture of the Rich and Cuprous Ores of the Talnakh and Oktyabrsk Deposits with the Achievement of Optimal and Economically Justified Completeness of Pyrrhotine Output to a Dump. Stage: Results of Laboratory Studies to Achieve High-Quality Selective Concentrates from the Current Production Charge Processed at TCF: Report of LO (TLO)-21-2006 (GMOITs ZF OAO GMK Norilsk Nickel, Norilsk, 2006).

  21. Development of a Technology for Enrichment of a Mixture of the Rich and Cuprous Ores of the Talnakh and Oktyabrsk deposits with the Achievement of the Optimal and Economically Justified Completeness of the Pyrrhotine Output to a Dump. Stage: Results of Studies on the Enrichment of Three Samples of the Mineral Raw Materials of Promising Extraction Using Extraction Technology: Scientific and Technical Report LO GN-16-2007 (NICh NF Institut Norilskproect Norilsk, OOO Institut Gipronikel, 2007).

  22. M. N. Naftal and S. S. Naboichenko, “Selection of an effective surfactant for pressure oxidation leaching of nickel–pyrrhotine concentrates,” Tsvetn. Met., No. 6, 56–62 (2010).

  23. M. N. Naftal, “Use of a combined surfactant is a promising direction for improving the technology of pressure oxidation leaching of nickel–pyrrhotine concentrates,” Tsvetn. Met., No. 10, 47–53 (2011).

  24. M. N. Naftal’, S. S. Naboichenko, R. Yu. Sharkii, et al., “Increasing the extraction of nickel and platinum group metals in the technology of pressure oxidation leaching of nickel–pyrrhotine concentrates,” Tsvetn. Met., No. 9, 100–113 (2013).

  25. M. N. Naftal’, S. S. Naboichenko, T. N. Lugovitskaya, and K. N. Bolatbaev, Surfactants in the Autoclave Hydrometallurgy of Nonferrous Metals (OOO UIPTs, Yekaterinburg, 2014).

  26. I. I. Asanova, Yu. F. Markov, M. N. Naftal’, et al., “Application of a modified apolar collector during sulfur sulfide flotation,” Tsvetn. Met., No. 10–11, 52–56 (1998).

  27. W. Kunda, B. Rudyk, and V. N. Mackiw, “Iron and sulphur from sulphidic iron ores,” CIM Bull. 61 (675), 819–835 (1968).

    CAS  Google Scholar 

  28. V. I. Goryachkin, N. V. Serov, B. S. Mints, et al., “Two-stage pressure oxidation leaching of pyrrhotine concentrates,” Tsvetn. Met., No. 4, 16–19 (1984).

  29. V. I. Korsunskii, V. I. Goryachkin, A. G. Kitai, et al., “On the choice of the type of mixing devices for leaching pyrrhotine concentrates,” Tsvetn. Met., No. 4, 31–33 (1988).

  30. I. I. Smirnov, G. N. Shivrin, and A. L. Sirkis, Autoclave Technology for Processing Pyrrhotine Concentrate (Izd. Krasnoyarsk. Univ., Krasnoyarsk, 1986).

    Google Scholar 

  31. A. G. Kitai, V. I. Goryachkin, and V. P. Korneev, “Features of the composition of products of pressure oxidation leaching of pyrrhotine concentrates,” Tsvetn. Met., No. 1, 11–13 (1975).

  32. A. V. Medvedev, A. G. Kitai, and V. A. Isaev, “Mechanism of formation of iron oxides in the process of pressure leaching of pyrrhotine concentrates,” Tsvetn. Met., No. 6, 30–33 (1985).

  33. Ya. M. Shneerson, A. A. Onatskaya, L. V. Volkov, et al., “Laws of the behavior of molten sulfur during pressure leaching of nickel–pyrrhotine concentrates,” Tsvetn. Met., No. 11, 14–17 (1995).

  34. Development of Scientific Foundations and Verification of Technological Processes that Ensure an Increase in the Extraction of Platinum Group Metals at Norilsk GMK: Research Report of Institute MITHT. Study of the Peculiarities of the Behavior of Platinum Group Metals in the Processing of Pyrrhotine Concentrates. Project no. 082-64-41. GR no. 8175825 (Moscow, 1982).

  35. V. F. Borbat and A. B. Voronov, Autoclave Technology for Processing of Nickel–Pyrrhotine Concentrates (Metallurgiya, Moscow, 1980).

    Google Scholar 

  36. Kh. T. Sharipov, V. F. Borbat, Sh. Sh. Daminova, et al., Chemistry and Technology of Platinum Metals (University, Tashkent, 2018).

    Google Scholar 

  37. A. G. Kitai, “Behavior of iron and sulfur in pressure oxidation leaching of the pyrrhotine concentrates from Norilsk GMK,” Candidate’s Dissertation in Engineering (Moscow, 1977).

  38. K. N. Subramanian and P. H. Jennings, “Review of the hydrometallurgy of chalcopyrite concentrates,” Canad. Met. Quart. 1 (2), 387–400 (1972).

    Article  Google Scholar 

  39. J. E. Dutrizac and R. J. C. McDonald, “Ferric ion as a leaching medium,” Miner. Sci. & Eng. 6 (2), 59–100 (1974).

    CAS  Google Scholar 

  40. J. M. Toguri, “A review on the methods of treating nickel-bearing pyrrhotine; with special reference to the Sudbury area pyrrhotine,” Canad. Met. Quart. 14 (4), 323–338 (1975).

    Article  CAS  Google Scholar 

  41. I. D. Reznik, G. P. Ermakov, and Ya. M. Shneerson, Nickel (OOO Nauka Tekhnolog., Moscow, 2003).

    Google Scholar 

  42. M. S. Gusakov, “Development of a method for leaching sulfide concentrates with sulfuric acid solutions of ferric iron formed by immobilized biomass (for example, nickel-containing pyrrhotine concentrate at Talnakh OF),” Extended Abstract of Cand. Scie (Eng.) Dissertation, Moscow, 2012.

  43. M. S. Gusakov, L. N. Krylova, and E. V. Adamov, “Leaching of nickel from pyrrhotine concentrates by iron oxidized by immobilized biomass,” Tsvetn. Met., No. 4, 15–19 (2011).

  44. M. S. Gusakov and L. N. Krylova, “Use of bacterial sulfuric acid solutions of ferric iron in hydrometallurgy,” Metallurg, No. 4, 89–91 (2012).

    Google Scholar 

  45. D. Dreisinger, New Developments in Cu and Ni Hydrometallurgy: Presentation to JOGMEC (2006). http:// mric.jogmec.go.jp/kouenkai_index/2006/060206_ Dr_David_Dreisinger.pdf.

  46. K. G. Baxter, D. G. Dixon, and A. G. Pavlides, “Testing and modeling a novel iron control concept in a two-stage ferric leach/pressure oxidation process for the sepon copper project,” in Proceedings of International Conference on the Use of Pressure Vessels for Metal Extraction and Recovery Pressure Hydrometallurgy 2004. 34-th Annual Hydrometallurgy Meeting of CIM (Canadian Inst. Mining, Metallurgy and Petroleum, Montreal, 2004), pp. 57–76.

  47. S. Keokhounsy and T. Moore, Hydromet at Sepon. Presented at ALTA/Copper-10 (Perth, 2006).

  48. V. A. Bryukvin, V. T. D’yachenko, and O. I. Tsybin, et al., “On some peculiarities of the mechanism of acid leaching of pyrrhotines,” Tsvetn. Met., No. 2, 45–50 (2008).

  49. A. V. Kuklinskii, “Reactions of a nonequilibrium nonstoichiometric pyrrhotine layer,” Candidate’s Dissertation in Chemistry (Krasnoyarsk, 2001).

  50. A. V. Kuklinskii, Yu. L. Mikhlin, G. L. Pashkov, et al., “Conditions for the formation of a nonequilibrium nonstoichiometric layer on pyrrhotine in an acid solution,” Elektrokhimiya 37 (12), 1458–1465 (2001).

    Google Scholar 

  51. Yu. L. Mikhlin, A. V. Kuklinsky, G. L. Pashkov, et al., “Electrochemical oxidation of pyrrhotine in acidic solutions,” Elektrokhimiya 37 (12), 1466–1471 (2001).

    Google Scholar 

  52. A. V. Kuklinskii, “Nonequilibrium nonstoichiometric pyrrhotine layer in oxidation processes in air,” in Proceedings of Conference on Physicochemistry and Technology of Inorganic Materials (Knizhn. Izd., Krasnoyarsk, 2000), pp. 14–17.

  53. V. A. Bryukvin, V. T. D’yachenko, and O. I. Tsybin, “Effect of the trivalent iron content in a pyrrhotine concentrate on the reaction mechanism of its sulfuric acid leaching,” Russ. Metall. (Metally), No. 1, 40–46 (2012).

  54. M. N. Naftal’, A. F. Petrov, T. P. Saverskaya, et al., “Clarification of the mechanism of influence of lignosulfonates on the formation of sulfur sulfide and sulfur phases in the operations of pressure oxidation leaching of nickel–pyrrhotine concentrates and autoclave sulfur smelting,” Tsvetn. Met., No. 8, 53–62 (2009).

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to K. A. Solntsev.

Additional information

Translated by K. Shakhlevich

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Solntsev, K.A., Naftal’, M.N., Bryukvin, V.A. et al. Substantiation of a Combined Technology for the Hydrometallurgical Beneficiation of a Pyrrhotine-Containing Charge Based on Pressure Oxidation Leaching Using Ferric Sulfate as a Pyrrhotine Oxidizer. Russ. Metall. 2020, 942–954 (2020). https://doi.org/10.1134/S003602952009013X

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1134/S003602952009013X

Keywords:

Navigation