Abstract
The fracture toughness of a thin-sheet V-1167RDTV aluminum alloy is investigated by digital image correlation method. The ways of correct estimation of the stress intensity coefficients obtained by calculating the displacement fields by the Williams equation are found. Buckling criteria are quantitatively determined, and a crack propagation resistance curve (R-curve) is plotted for static loading.
Similar content being viewed by others
REFERENCES
E. N. Kablov, “Innovative solutions of FGUP VIAM GNTs RF for ‘Strategic Directions of Designing Materials and Technologies of Their Processing until 2030,’” Aviats. Mater. Tekhnol., No. 1(34), 3–33 (2015). https://doi.org/10.18577/2071-9140-2015-0-1-3-33
E. N. Kablov, “Formation of domestic space materials science,” Vestn. RFFI, No. 3, 97–105 (2017).
E. N. Kablov, “The key problem is materials,” in Trends and Guidelines for Innovative Development in Russia (VIAM, Moscow, 2015), pp. 458–464.
A. V. Grinevich, A. B. Laptev, S. Yu. Skripachev, and G. A. Nuzhnyi, “Matrix of strength characteristics for assessing the limiting states of structural metal materials,” Aviats. Mater. Tekhn., No. 2, 67–74 (2018). https://doi.org/10.18577/2071-9140-2018-0-2-67-74
A. V. Grinevich, V. S. Erasov, V. V. Avtaev, and S. M. Shvets, “Determination of fracture toughness of sheet aluminum alloys,” Aviats. Mater. Tekhn., No. S4, 40–44 (2014). https://doi.org/10.18577/2071-9140-2014-0-s4-40-44
M. A. Shtremel’, Fracture. Book. 1. Fracture of Material (MISiS, Moscow, 2014).
H. D. Buie, Fracture Mechanics: Inverse Problems and Solutions (Fizmatlit, Moscow, 2011).
P. Lopez-Crespo, A. Shterenlikht, A. Patterson, J. R. Yates, and P. J. Withers, “The stress intensity of mixed mode cracks determined by digital image correlation,” J. Strain Analysis 43 (8), 769–780 (2008).
Y. Du, F. A. Diaz, R. L. Burguete, and E. A. Patterson, “Evaluation using digital image correlation of stress intensity factors in an aerospace panel,” Exp. Mech. 51, 45–57 (2011).
J. R. Yates, M. Zanganeh, and Y. H. Tai, “Quantifying crack tip displacement fields with DIC,” Eng. Fract. Mech. 77, 2063–2076 (2010).
A. S. Chernyatin, I. A. Razumovskii, and Yu. G. Matvienko, “Estimation of the inelastic deformation zone size at the crack tip based on analysis of displacement fields,” Zavod. Lab. 82 (12), 45–51 (2016).
Estimated Characteristics of Aviation Metal Structural Materials: A Handbook (OAO OAK, Moscow, 2011).
E. N. Starova, “Evaluation of the fracture toughness of wide elements based on the results of testing laboratory specimens,” Fiz.-Khim. Mech. Mater., No. 3, 81–85 (1988).
M. A. Sutton, J.-J. Orteu, and H. W. Schreier, Image Correlation for Shape, Motion and Deformation Measurements (Univ. South Carolina Columbia, 2009).
V. V. Avtaev, N. O. Yakovlev, V. S. Erasov, and N. Yu. Podzhivotov, “Determination of the position of the crack tip by digital image correlation during static and cyclic fracture toughness tests of aluminum alloys,” Deform. Razrushenie Mater., No. 7, 30–38 (2018). https://doi.org/10.31044/1814-4632-2018-7-30-38
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by K. Shakhlevich
Rights and permissions
About this article
Cite this article
Avtaev, V.V., Yakovlev, N.O. Digital Image Correlation Method Study of the Static Fracture Toughness and the Fracture Strength of a Thin-Sheet Aluminum Alloy. Russ. Metall. 2020, 1207–1212 (2020). https://doi.org/10.1134/S0036029520100043
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029520100043